Professional Documents
Culture Documents
BEAM MARK BEAM SECTION REINFORCEMENT STIRRUPS 1. This drg is to be read in conjuction with relevant
architectural and services drgs.
con.mix.M25 Stirrup=8# Spacing b/w Ties = 5" 2. Do not scale follow written dimensions only.
1 2 3 4 5 A A A 7''
3.
4.
All dimensions are in foot/inch/MM
All dimensions must be checked with architect's drgs. and
in case of any discripancy architects drgs.shall prevail
5. All construction joints shall be aproved by consultant on
the basis of scheme prepared by contractor
A A 6. All footings are centraly placed with respect to the center
B2 A=10-16# 15'' 7.
line of columns.
Footings are desinged for a safe bearing capacity
Size : 9X18 A A
B4 B4 grade of concrete shall be M-20/25 as per(Design mix)
8.
G G A A A 9.
IS:456(latest version) unless otherwise specified.
Reinforcements shall be high yield strength deformed cold
twisted bars conforming to is 1786 fy-500 of tested quality
10. All angles are right angles unless otherwise specified
7''
SUNKEN SLAB SUNKEN SLAB A A A 11. ANY CHANGE IN THE CONSTRUCTION OF STRUCTURE SHOULD NOT BE DONE
B3
WITHOUT CONSULTING STRUCTURE ENGINEER
B1
B3 A=8-16#
B1
13. Not more than 50% of the bars shall be lapped at any section.
9'' laps close to the mid span in bottom bars and close to
F F A A A 7''
B
C
D
Column
Plinth Beams
Beams
40mm
30mm
25mm
E Slabs 20mm
B2 B2
A A Legend
A A p.c.c work
Size : 9X12
B3
Brick work
B1
B1
Sunken slab
A A A
Top Reinforcement in plan
Bottom Reinforcement in plan
B4 B4
E E R0 GFC.
0
0
LIFT REV.NO.
B3
DATE
5'-3" X 5'-3" 4' 4'
CLIENT :
B1 (9X12)
D B4
D
STAIR 4'
4' PROJECT TITLE :
7'-8" X 11'-6" 0 0
B1
0 0
B3
DRAWING TITLE :
0
C C SCALE:-
DATE:-
B1
B1
B3
B B2 B2 B
0
B3 (9X12)
B1
B3
B1
4' 0 0
0 0
CLIENTS
A B2 B2
A 0
4'
0
B4 (9X12)
4' 0 0
4'
0 0
1 2 3 4 5