Professional Documents
Culture Documents
2) All Samples must be submitted for approvals, including working samples of both lighting
(with an attached lux level calculation) and signage (same as the proposal)
3) Tenants must submit a Green Star Compliance Layout, as mentioned in the email. This must
be met with a min. of 3-star Rating, as required from the Lease.
4) Any changes made after this issued Approval must be highlighted and resubmitted for
approvals.
5) Final Approved MAF Stamped Drawings to be displayed at site at all times, A3, installed in No. Revision details.
the hoarding, or made available electronically. All comments made from the Concept - Final
REVISION STATUS
Design is subject to comments herein AND previously noted unless stated otherwise.
6) All dimensions to be checked on site by tenant contractor. Tenant finishes must be inside
the leaseline.
7) Final Approved Reflected Ceiling Plan (Architectural) to be followed. Ensure this is the same
in the MEP Approved Drawings.
8) All comments herein and previously noted are considered unless otherwise stated.
Project number.
Drawing number.
Revision Suffix.
CABINET
STORAGE
RACK CABINET
CCTV/ SERVER
5. In carrying out works relating to this drawing, the contractor.is
to be responsible for complying with the full requirements of
MINE NICHE DISPLAY-26 NOS
1174
1174
all related legislation including Local Statutory Authority
800
Services Regulations and all Safety Acts (Latest Edition).
622 620 6.This drawing should be read in conjunction with other relevant,
Architectural, Structural, Mechanical and Electrical drawings
POS/ and all relevant sections of the specifications.
500
AD
MASS GOLD
800
DISPLAY
PREMIUM
1476
ADJOINING TENANCY
2800
2800
GOLD
976
ADJOINING TENANCY
MASS GOLD
PREMIUM
DISPLAY
GOLD
1350
1350
C C
500
500
PREMIUM GOLD DISPLAY
PREMIUM GOLD DISPLAY
No. Revision details.
MASS GOLD DISPLAY
2800
2750
2750
52
Project :
1420 1420
LOW HEIGHT PARTITION LOW HEIGHT PARTITION 860
860 MIRDIF CITY CENTRE
WALL NICHE WALL NICHE
POWER WALL
WALL PANEL
1200 1200
GLASS FACADE
GLASS FACADE
1200
1200
Drawing title :
500
500
FREE STAND DISPLAY FREE STAND DISPLAY
GLASS FACADE
2950 2000
GLASS FACADE
2950
FURNITURE LAYOUT
DEMISE PIER FINISHED 50 50 50 LEASE LINE 50 DEMISE PIER FINISHED
3050 3050
BY LANDLORD 50X100MM S.S FRAME IN 15MM THICK CRYSTAL 50X100MM S.S FRAME IN BY LANDLORD
BRASS FINISH(MT 01) CLEAR TOUGHENED BRASS FINISH(MT 01)
GLASS DOOR
15MM THICK CRYSTAL
A B 15MM THICK CRYSTAL
CLEAR TOUGHENED
GLASS
CLEAR TOUGHENED AREA- 843.5 SQ.FT
GLASS
50X100MM S.S FRAME IN
BRASS FINISH(MT 01)
Project number.
50X100MM S.S FRAME IN 50X100MM S.S FRAME IN
BRASS FINISH(MT 01) BRASS FINISH(MT 01) Drawing number.
Q
R
+20.500 FFL
+20.425 SSL Scale. Date. Drawn. Designed &
Checked:
1:50 24.02.2023 MGD PROJECTS
MGD PROJECTS
NOTES & LEGENDS:
A B 1. Dimensions must not be scaled from this drawing.
2. All dimensions to be checked on site and discrepancies are to
CCMI be referred to this office for decision.
RS Malbar & gold
ADJOINING TENANCY 3. All work specified in this drawing to be carried out in strict
accordance with relevant Codes of Practice and Statutory
Authority Requirements.
4. All materials to be in full compliance with Codes of Practice
Statutory Authority Requirements
CCTV/ SERVER
RACK CABINET
STORAGE
CABINET
6811 5. In carrying out works relating to this drawing, the contractor.is
to be responsible for complying with the full requirements of
1173
1174
all related legislation including Local Statutory Authority
1232
1232
BLUE WPC WITH FR BLUE WPC WITH FR Services Regulations and all Safety Acts (Latest Edition).
6.This drawing should be read in conjunction with other relevant,
MDF BACKING MDF BACKING
622 BLUE WPC WITH FR 620 Architectural, Structural, Mechanical and Electrical drawings
and all relevant sections of the specifications.
MDF BACKING FR GYPSUM 400
385 7. All dimensions are in millimeters unless otherwise indicated.
CLADDING
U PROFILE IN MT 01 U PROFILE IN MT 01
248
FINISH FINISH
FR GYPSUM FR GYPSUM
CLADDING CLADDING
ADJOINING TENANCY
ADJOINING TENANCY
C C
6101
6101
FR GYPSUM FR GYPSUM
CLADDING CLADDING No. Revision details.
REVISION STATUS
D D
FR GYPSUM FR GYPSUM
CLADDING CLADDING
52
400
61
400
61
S.S PROFILE IN S.S PROFILE IN Project :
BRASS FINISH(MT 01) BRASS FINISH(MT 01)
133
47
MIRDIF CITY CENTRE
47
860
237 WALL NICHE 2000 WALL NICHE
237
GLASS FACADE
GLASS FACADE
1200
1200
Drawing title :
1000
850
850
LEATHER FINISH
LEATHER FINISH
47
PARTITION LAYOUT
47
+20.500 FFL
Designed &
+20.425 SSL Scale. Date. Drawn.
Checked:
1:50 24.02.2023 MGD PROJECTS
MGD PROJECTS
All Floor
NOTES boxes must be flush mounted and
& LEGENDS:
placed under floor furniture
A B
1. Dimensions must not be scaled from this drawing.
Transition
2. All dimensions details between
to be checked on sitemall flooring and
and discrepancies are to
CCMI tenant flooring
be referred to be
to this office forsubmitted
decision.
RS Malbar & gold ADJOINING TENANCY 3. All work specified in this drawing to be carried out in strict
accordance with relevant Codes of Practice and Statutory
High quality
Authority hard surface flooring such as
Requirements.
natural wood,
4. All materials to bestone, porcelain
in full compliance tiles, ofmarble
with Codes Practice
and granite
Statutory to be
Authority used.
Requirements
Carpet,
5. In carryingVinyl,
out worksConcrete
relating to and epoxytheflooring
this drawing, contractor.is
to be
will notresponsible
be permittedfor complying with the full requirements of
all related legislation including Local Statutory Authority
Services Regulations and all Safety Acts (Latest Edition).
SS
6.Thistransition
drawing shouldstrip required
be read at junction
in conjunction with othertorelevant,
two
different flooring
Architectural, Structural,materials
Mechanical and Electrical drawings
and all relevant sections of the specifications.
3112
7. Allwires
All dimensions
andare in millimeters
cables to beunless
neatlyotherwise indicated.
concealed.
ADJOINING TENANCY
2900 2400 2900 Mall flooring required at "POP IN" from lease
ADJOINING TENANCY
line to closure line
C C
3600
No. Revision details.
REVISION STATUS
D D
EXPANSION JOINT
PROFILE MATCHED
WITH FLOORING TILE
600
52
Project :
588
DETAIL- B
Drawing title :
subject to physical sample
DETAIL- A
FLOORING LAYOUT
DEMISE PIER FINISHED LEASE LINE DEMISE PIER FINISHED
BY LANDLORD BY LANDLORD
LEGENDS:
600x1200 BEIGE
PORCELAIN TILE A B AREA- 843.5 SQ.FT
600X1200 GREY Sample/mock up is 3mm BRASS TRANSITION
PORCELAIN TILE required
STRIP BETWEEN STORE AND Project number.
8MM BRASS STRIP
MALL FLOOR IN MT 01 FINISH
EXPANSION JOINT Drawing number.
PROFILE MATCHED WITH
FLOORING TILE Q
R
ADJOINING TENANCY
BOFC = +3850MM- GYPSUM+ Install automated lighting controls/occupancy
PAINT FINISH 2400 sensors which adjust the artificial light levels
ADJOINING TENANCY
BOFC = +4000MM- GYPSUM+ DETAIL A depending on occupant presence
WALLPAPER
Choice of light fittings must take into account
BOFC = +4500MM- GYPSUM+
anti glare features as a requisite
7233
DETAIL- B
PAINT FINISH
C C
7233
LED STRIP LIGHTING (GOLD) Illuminated signage must be on a timer
DETAIL- A
switch and programmed to suit Shopping
LED STRIP LIGHTING
Mall trading hours
3600
(DIAMONDS) CL LEVEL +3700 CL LEVEL +4000 CL LEVEL +3700
Light No.
fixtures shall be of high quality
Revision details.
MT 01 BRASS CLADDING commercial grade
REVISION STATUS
D D
All lights to be warm white
DETAIL- B
DETAIL B
All lights to be warm white. Color
temperature between 3500 and 4000K
A
52
Project :
7800
Section A-A (bulkhead detail)
CL LEVEL +4500 A MIRDIF CITY CENTRE
EXPANSION JOINT TO BE to be rounded edge
1900
MAINTAINED AT CEILING
Drawing title :
8200
CEILING LAYOUT
DEMISE PIER FINISHED LEASE LINE DEMISE PIER FINISHED
BY LANDLORD BY LANDLORD
Project number.
Drawing number.
Q
R
+20.500 FFL
+20.425 SSL Scale. Date. Drawn. Designed &
Checked:
1:50 24.02.2023 MGD PROJECTS
MGD PROJECTS
NOTES & LEGENDS:
A B
1. Dimensions must not be scaled from this drawing.
2. All dimensions to be checked on site and discrepancies are to
CCMI be referred to this office for decision.
RS Malbar & gold ADJOINING TENANCY 3. All work specified in this drawing to be carried out in strict
accordance with relevant Codes of Practice and Statutory
Authority Requirements.
CL LEVEL +3850
4. All materials to be in full compliance with Codes of Practice
Statutory Authority Requirements
5. In carrying out works relating to this drawing, the contractor.is
6579 to be responsible for complying with the full requirements of
all related legislation including Local Statutory Authority
CL LEVEL +3700
Services Regulations and all Safety Acts (Latest Edition).
507 507 507 507 507 507 507 507 507 NOTE: AS PER BRAND STANDARDS, WE USE 6500K 6.This drawing should be read in conjunction with other relevant,
COUNTERTOP LIGHTS FOR THE MINE(DIAMOND) Architectural, Structural, Mechanical and Electrical drawings
DISPLAY AREA GLOBALLY ON ALL OUR STORES TO and all relevant sections of the specifications.
ENHANCE AND HIGHLIGHT THE JEWELLERY 7. All dimensions are in millimeters unless otherwise indicated.
519
519
DISPLAY AND AS PER MARKETING REQUIREMENTS,
AND THIS CANNOT BE ALTERED.
519
519
CL LEVEL +3850
1530 1500 1530 CL LEVEL +3850
ADJOINING TENANCY
519
519
2400
ADJOINING TENANCY
450
450
519
519
CL LEVEL +4000
966
7233
7233
519
519
450 450
C C
1350
COUNTER TOP GOLD SECTION -3000K
519
519
COUNTER TOP DIAMOND SECTION-6500K
3700
519
519
CL LEVEL +3700 CL LEVEL +3700
CUSTOMER AREA -4000K
806 806 LED STRIP LIGHT (GOLD) -3000K
No. Revision details.
519
519
1350 REVISION STATUS
D D LED STRIP LIGHT (DIAMOND) -6500K
519
519
450 1500 CHANDELIER
965
SPEAKER
450
450
519
519
450
519
519
1530 1500 1530
52
300
300
Project :
300
CL LEVEL +4500
LIGHTING LAYOUT
DEMISE PIER FINISHED LEASE LINE DEMISE PIER FINISHED
BY LANDLORD BY LANDLORD
Project number.
Drawing number.
Q
R
+20.500 FFL
+20.425 SSL Scale. Date. Drawn. Designed &
Checked:
1:50 24.02.2023 MGD PROJECTS
MGD PROJECTS
NOTES & LEGENDS:
UNDERSIDE OF BEAM
CL LVL +4000
CL LVL +3850
CL LVL +3700 S E R V I C E Z O N E CL LVL +3700
REVISION STATUS
15MM THICK CRYSTAL
CLEAR TOUGHENED GLASS
ADJOINING TENANCY
4500
LEASE LINE
ENTRANCE
Project :
200mm THK.
BLOCKWORK
GROUND FLOOR LVL. S.S FRAME IN BRASS
FINISH(MT 01)
TENANT UNIT MIRDIF CITY CENTRE
+ 20.500 FFL + 20.500 FFL
+ 20.425 SSL + 20.425 SSL
Drawing title :
LEATHER CLADDING
50MM SKIRTING- S.S PROFILE IN CONCEALED SHUTTER
SECTIONS
EXPANSION JOINT TO BE
ANTIQUE BRASS FINISH (MT 02)
50MM SKIRTING- S.S PROFILE MAINTAINED UPTO WALL LINING
IN BRASS FINISH (MT 01)
NICHE DISPLAY
Drawing number.
Revision Suffix.
LEATHERED PANEL
LEATHER FINISH
FIRST FLOOR LVL.
WPC BLUE FINISH LEATHERED PANELS + 26.500 FFL
U- PROFILE IN BRASS FINISH (MT 01)
POWER WALL
+ 26.425 SSL
UNDERSIDE OF BEAM
CL LVL +3850
S E R V I C E Z O N E CL LVL +3700
LEASE LINE
4500
4100
ENTRANCE
Project :
500 DIA M LOGO-
(BACK LIT)
200mm THK.
BLOCKWORK S.S FRAME IN BRASS MIRDIF CITY CENTRE
TENANT UNIT FINISH(MT 01)
GROUND FLOOR LVL.
1400
+ 20.500 FFL + 20.500 FFL
+ 20.425 SSL + 20.425 SSL Drawing title :
SECTIONS
50MM SKIRTING- S.S PROFILE IN CONCEALED CABINET SHUTTER EXPANSION JOINT TO BE 50MM SKIRTING- S.S PROFILE
ANTIQUE BRASS FINISH (MT 02) MAINTAINED UPTO WALL LINING IN BRASS FINISH (MT 01)
NICHE DISPLAY
Drawing number.
Revision Suffix.
8400
UNDERSIDE OF BEAM
CL LVL +4000
S E R V I C E Z O N E
CL LVL +3850 CL LVL +3850
No. Revision details.
CL LVL +3700 CL LVL +3700
REVISION STATUS
ADJOINING TENANCY
ADJOINING TENANCY
Project :
SECTION C-C
Project number.
Drawing number.
Revision Suffix.
UNDERSIDE OF BEAM
CL LVL +4000
S E R V I C E Z O N E
CL LVL +3850 CL LVL +3850
No. Revision details.
CL LVL +3700 CL LVL +3700
REVISION STATUS
ADJOINING TENANCY
ADJOINING TENANCY
Project :
Lease line
LOW HEIGHT PARTITION 15MM THICK CRYSTAL CLEAR 15MM THICK CRYSTAL CLEAR LOW HEIGHT PARTITION
SECTIONS
TOUGHENED GLASS A
TOUGHENED GLASS
Glass to be recessed
50 X100MM S.S FRAME IN
BRASS FINISH ( MT01)
15MM THICK CRYSTAL CLEAR
TOUGHENED GLASS DOOR
Max 50 mm
the frame to be rounded AREA- 843.5 SQ.FT
with no bulky corners- see
SECTION D-D visual comment
Project number.
Drawing number.
Shadow gap 20 mm
Revision Suffix.
R Q Authority Requirements.
4. All materials to be in full compliance with Codes of Practice
Statutory Authority Requirements
5. In carrying out works relating to this drawing, the contractor.is
to be responsible for complying with the full requirements of
all related legislation including Local Statutory Authority
8400 Services Regulations and all Safety Acts (Latest Edition).
6.This drawing should be read in conjunction with other relevant,
Architectural, Structural, Mechanical and Electrical drawings
and all relevant sections of the specifications.
7. All dimensions are in millimeters unless otherwise indicated.
ADJOINING TENANCY
4500
4100
DEMISE PIER FINISHED DEMISE PIER FINISHED
BY LANDLORD BY LANDLORD
3300
3300
Project :
1400
FLOOR FINISH BY
+ 20.500 FFL
1050
Project number.
Drawing number.
Revision Suffix.
47
1. Dimensions must not be scaled from this drawing.
2. All dimensions to be checked on site and discrepancies are to be
referred to this office for decision.
LEATHERFINISH 3. All work specified in this drawing to be carried out in strict accordance with relevant
Codes of Practice and Statutory Authority Requirements.
4. All materials to be in full compliance with Codes of Practice Statutory Authority Requirements
CCMI 5. In carrying out works relating to this drawing, the contractor.is to be responsible for complying
RS Malbar & gold 1.5MM THICK BRASS
50
with the full requirements of all related legislation including Local Statutory
Authority Services Regulations and all Safety Acts (Latest Edition).
6.This drawing should be read in conjunction with other relevant, Architectural,
CAPPING (MT 01 FINISH) Structural, Mechanical and Electrical drawings and all relevant sections of the specifications.
7. All dimensions are in millimeters unless otherwise indicated.
1200
1.5MM THICK BRASS
CAPPING (MT 01 FINISH)
LED LIGHT
UV PRINTED GLASS
47 50
330
85
IN GOLD COLOR
R2
Project :
MT-01 FINISH
Drawing number.
ELEVATION SECTION
Revision Suffix.
Project :
Drawing title :
SIGNAGE REFERENCE
Drawing number.
Revision Suffix.
REVISION STATUS
Project :
Drawing title :
SIGNAGE REFERENCE
Drawing number.
Revision Suffix.
REVISION STATUS
3D RENDERS
Project :
Drawing title :
Project number.
Drawing number.
Revision Suffix.
Sign baseline
Lease line
Glass to be recessed
Max 50 mm
Max 50 mm
the frame to be rounded
with no bulky corners- see
visual comment
recycled material
CCMI
RS Malbar & gold
CCMI
RS Malbar & gold
hexagon to be rounded as
proposed shape