Professional Documents
Culture Documents
SERVICE MANUAL
Model HWM65-187S
Features
Full plastic cabinet
Choose water current and washing time
Choose spinning time
Sperate washing and spinning
Full plastic washing tub and spinning tub
1.Contents 1
2. Features 2
3. Specifications 3
4. Safety precautions 4
5. Warning and cautions 5
6. Net dimension 6
7. Installation and accessory parts 7
8. Parts and functions 10
9. Maintenance service and trouble shooting 11
10. Wiring diagram 15
1
Downloaded from www.Manualslib.com manuals search engine
FEATURES
Features
Full plastic cabinet
Choose water current and washing time
Choose spinning time
Sperate washing and spinning
Full plastic washing tub and spinning tub
2
Downloaded from www.Manualslib.com manuals search engine
Specification
Please insert the power cord into special When the machine is normally using, please
receptacle with rated voltage.Be sure to put the power plug at the location easily to
use single-phase two pins receptacle. be inserted and extracted by hand. Be sure
The earthing terminal must be earthed to pull the plug off when there'spower failure,
reliably.If possible,please adopt electric or the machine is being moved, cleaned or
leakage protector. when it is idle.
In case the washing machine is installed Do not use water hotter than 50 C .
on ground with carpet , do not block the
ventilation hole with carpet.
Ventilation hole at
the bottom of the
washing machine
Do not put the machine at damp place Do not wash water-proof laundries such
like the bathroom . Never wash it with as the raincoat, bicycle shelter etc. To
water. Do not place wet laundries on the avoid abnormal vibration during spinning.
control panel.
Do not stretch hands into the working Do not decompose, repair or alter the
machine. It is dangerous even if the machine by yourself.
rotation is slow. Take special care of
the children.
Do not put any hot or heavy items Do not wash laundries with volatile
( such as the kettle with hot water ) materials (such as thinner, petrol etc.).
on the washing machine.
l
Petro Thinner
Handicapped or children without care Keep the machine away from direct
shall not use the machine. sunlight and heat source like the
heater.
5
Downloaded from www.Manualslib.com manuals search engine
NET DIMENSION
690
37 6
Unit mm
Figure 1
0.7m<H <1.2m
6
Downloaded from www.Manualslib.com manuals search engine
INSTALLATION AND ACCESSORY PARTS
Figure 1
Soft item
Figure 2
Embed the drain hose into the groove along the side
of the spin tub in the order of (1)~(3), heading for the
side of the spin tub. (See to Figure 3).
Figure 3
Extend to the Embed into the
spin tub side groove in turn
7
Downloaded from www.Manualslib.com manuals search engine
INSTALLATION AND ACCESSORY PARTS
Loosen the fastening screw of the spin tub Inner lining of the
brake wheel
shaft. The spin tub then can be taken out.
Fastening screw of
In installation, be sure to inlay the bulge of the brake wheel
the inner lining of the brake wheel into the Brake wheel
groove of the spin tub shaft. (Figure 8 Spin motor shaft
Figure 8
Right Wrong
Figure 9
9
Downloaded from www.Manualslib.com manuals search engine
PARTS AND FUNTIONS
Wash selector
Wash timer
Figure 10
10
Downloaded from www.Manualslib.com manuals search engine
MAINTENANCE SERVICE AND TROUBLE SHOOTING
Insert the power plug , but the machine does not work
Wash part
NO
Check if the wash timer is opened ? Open the wash timer.
YES
NO
Check if the power source is available? Switch on the power.
YES
YES
YES
YES
NO
Check if the fuse is good? Replace the fuse.
YES
NO YES NO
Replace the capacitor Replace the wash timer Replace the motor
11
Downloaded from www.Manualslib.com manuals search engine
MAINTENANCE SERVICE AND TROUBLE SHOOTING
Spin part
Check if the spin timer NO
Open the spin timer.
is opened ?
YES
YES
YES
YES
YES
NO
Check if the fuse is good? Replace the fuse.
YES
NO YES
NO
Replace the capacitor. Check if the motor is good Replace the motor.
YES
NO
12
Downloaded from www.Manualslib.com manuals search engine
MAINTENANCE SERVICE AND TROUBLE SHOOTING
NO
YES
Is the belt too loose YES Adjust the tension of the belt.
or too tight?
NO
YES
Is the radiating pulley loose? Fasten the radiating pulley.
NO
Is the pulsator rubbing the YES Adjust the gap between the
bottom of the twin-tub? pulsator and the twin-tub.
YES
13
Downloaded from www.Manualslib.com manuals search engine
Trouble-shooting Answers to question
(If there's breakdown, please pull off the power plug before checking) The following
phenomena are not breakdowns sometimes. Please confirm again before
it to repair.
The draining Is the drain hose put down? Put down the drain hose?
does not work Is the drain hose blocked by Remove the foreign material?
foreign material?
Are there laundries falling to Please contact the after-sales
the outer side of the spin tub? service department.
Are there hair pin, coins or Remove the hair pin, coins or
There's abnormal metal items brought inside metal items
sound during washing the tub?
14
Downloaded from www.Manualslib.com manuals search engine
WIRING DIAGRAM
Purple
Spin timer Safety switch M
Orange Purple Grey 1 Spin
motor
C2
Brown
a Red
S2
C1 M Blue
S1 1
Fuse b Wash
Wash timer Yellow motor
Blue
Figure 12
There is overload protector installed in the motor. In case that the motor is overload or meets
breakdown in working, the protector will act and stop the motor. When the breakdown is
removed, the motor will resume normal working.
Actual Circuit Diagram
fuse
brown blue
Yellow/green
purple
red yellow purple
yellow Grey
Cabinet red Grey
wash capacitor spin
motor motor
blue
Figure13
15
Group
Haier Industrial Park, No.1, Haier Road
266101, Qingdao, China
http://www.haier.com