Professional Documents
Culture Documents
9.47 mm
36 ø18
100 100
195 195
All the pictures in the MI sheet are representative only and may vary from the Actual Product. All the pictures in the MI sheet are representative only and may vary from the Actual Product.
Note: Gear cover has Self retaining screws. Rotate the Mounting
Fig. 1 Fig. 2 Bracket and then mount Fig. 7 Fig. 8
3. Make the electrical connections in 6 pole connector 4. Secure the Gasket on the housing ribs.
(As shown in Fig 4-Single module shown for clarity)
9. Loosen the M16 bolts & Nuts(2x) 10. Recommendation
as per the marking. Use 3-Core 2.5 sq mm cable. Unscrew and take out the M8 bolts(4x)
Use Safety harness (1) (as recommended) between
Place the Gear Cover on the housing matching the Luminaire and Mounting structure (Both sides)
(M8 Bolts)
profile of gasket. Gear Cover
Adjust the angle of mounting.
N L N L
Engage the M8 bolts (4x) to 2
Gear Gasket 1
lock the bracket.
Input
Power
40 mm 8-9 mm
Tighten the M16 bolts & nuts Use Safety harness (2)
(M16 Bolts) (as recommended)
with torque of 114 Nm.
between mounting Bracket
O 8-10 mm
Tighten the M8 bolts with torque of 8 Nm. & Luminaire (Both sides)
Caution: Warranty void if earthing is not connected. Fig.3 Housing Ribs Fig.4 Fig. 9 Fig. 10
All the pictures in the MI sheet are representative only and may vary from the Actual Product. All the pictures in the MI sheet are representative only and may vary from the Actual Product.