Professional Documents
Culture Documents
MODEL SS1
FREE FLOAT STEAM TRAP WITH THREE-POINT SEATING AND THERMOSTATIC AIR VENTING
Features
lnline repairable stainless steel steam trap
for steam mains, tracer lines and small
process applications.
1. Self-modulating free float provides continuous,
smooth, low velocity condensate discharge as
process loads vary.
2. Constant water seal and unique three-point
seating ensure perfect steam-tight seal, even
under no-load conditions.
3. Trap incorporates thermostatic air vent for fast
startup.
4. Built-in screen with large surface area holds
back impurities.
5. Only one moving part, the free float, prevents
concentrated wear and provides a long
service life.
6. Easy, inline access to internal parts simplifies
cleaning and reduces maintenance costs.
Specifications
Model SS1NL SS1VL SS1NH SS1VH
Installation Horizontal Vertical Horizontal Vertical
Connection Screwed, Socket Welded, Flanged
Size (mm) 15, 20, 25
Orifice No. 5, 10, 21
Maximum Operating Pressure (MPaG) PMO 0.5, 1.0, 2.1
Maximum Differential Pressure (MPa) ∆PMX 0.5, 1.0, 2.1
Minimum Operating Pressure (MPaG) 0.01
Maximum Operating Temperature (˚C) TMO 220 400
PRESSURE SHELL DESIGN CONDITIONS (NOT OPERATING CONDITIONS): 1 MPa = 10.197 kg/cm2
Maximum Allowable Pressure (MPaG) PMA: 2.1 (SS1NL/SS1VL), 2.5 (SS1NH/SS1VH)
1 6 3 10 11
Maximum Allowable Temperature (°C) TMA: 220 (SS1NL/SS1VL), 400 (SS1NH/SS1VH)
12
To avoid abnormal operation, accidents or serious injury, DO NOT
CAUTION use this product outside of the specification range. Local regulations
may restrict the use of this product to below the conditions quoted.
Dimensions
• Screwed
SS1NL・SS1NH • SS1VL・SS1VH SS1NL・SS1NH/SS1VL・SS1VH Screwed* (mm)
L
H
S 25 130 1.8
H1
S
W1
W
Socket Welded
L h SS1NL・SS1NH/SS1VL・SS1VH Socket Welded (mm)
Weight
Size L H/W H1/W1 S φD φC h
C
(kg)
L
S
H
L
H
H1
Discharge Capacity
Differential Pressure (kg/cm2)
21
0.1 0.3 0.5 1 2 3 5 10 20
1. Line numbers within the graph refer to
300
orifice numbers.
5 21 2. Differential pressure is the difference
200
10 between the inlet and outlet pressure of the
Discharge Capacity (kg/h)
trap.
3. Capacities are based on continuous
100 discharge of condensate 6 ˚C below
70 saturated steam temperature.
4. Recommended safety factor: at least 1.5.
50
30
CAUTION
DO NOT use this product under conditions
20
that exceed maximum differential pressure,
as condensate backup will occur!
10
0.01 0.03 0.05 0.1 0.2 0.3 0.5 1.0 2.0
2.1
Differential Pressure (MPa)