Professional Documents
Culture Documents
Introduction To Devices
Created by: Hemal Patel
Modified on: Tue, 3 Nov, 2020 at 3:33 PM
TABLE OF CONTENTS
The Devices screen shows more information on the devices that are connected to the Ray Wi-Fi Access
Point via Wi-Fi and LAN.
Connected: This lists the devices which are connected to the Wi-Fi right now.
Recently Connected. This lists the devices which were historically connected to the Wi-Fi.
support.ray.life/support/solutions/articles/81000132914-introduction-to-devices 1/3
5/26/22, 1:04 PM Introduction To Devices : Support
All devices
This option is selected to show only Wi-Fi devices or LAN devices or ALL devices.
Note. If your cluster is in NAT mode, then you might see duplicate devices in the devices tab you
have a Ray AP in Gateway mode and other Ray APs in Repeater mode.
This option is to select to show devices only connected via 2.4 GHz or 5 GHz or All (i.e. both 2.4 & 5 GHz).
Category-wise devices(Phone/Tablets/Laptops)
This option allows filtering the devices between the following categories.
Signal-wise filtering
support.ray.life/support/solutions/articles/81000132914-introduction-to-devices 2/3
5/26/22, 1:04 PM Introduction To Devices : Support
You can search for a specific device by its MAC Address or device name.
You can include the devices with IP Reservation and Whitelist/Blacklist in the Search Option.
You can explore more about our fantastic features by clicking Whitelist / Blacklist
(http://support.ray.life/support/solutions/articles/81000134737-introduction-to-blacklist-whitelist-devices) and IP
Reservation (http://support.ray.life/support/solutions/articles/81000134767-introduction-to-ip-reservation).
Thank You
Ray Support
support.ray.life/support/solutions/articles/81000132914-introduction-to-devices 3/3