Remote Monitoring/Control/Power Center for Solar & UPS Backup Solutions
One unit that gives you complete control & monitoring of your remote Solar and UPS Backup units through your connected antenna or cellular gateway. Email alerts notify you in the event of developing problems at the site.
Intelligent - Powerful - Affordable
Remote Power Cycle Power In/Output, Battery, Individual PoE Ports Turbine Disconnects
(1200W Skid Kit)
48/24 VDC Auxiliary Port
features Controlled by Voltage, Temperature, Time Power In/Out Connections Smart Selectable PoE Switch • Gigabit PoE Switch with Passive Ports (3) PoE+ 35W, (4) PoE 18W • Power Cycle Individual Ports Auto/Manually • Ports 1-7 Selectable as 24V, 48V, or OFF by User • Selectable Auto Ping Watchdog Power Cycle Popular Applications • Surveillance with Antenna or Cellular Gateway • Remote IoT & M2M (Gas & Oil, Mines Agriculture) Remote Monitoring/Control • Wireless Bridges/Backhauls (WISP) • View System & Control through your Web Interface or SNMP • SCADA Upgrades (Gas & Oil, Agriculture) • Log and graph the history of up to 15,000 Data Sets • UPS/Solar Backup Control (Cell Towers, Utilities) • Auto Power Cycle or ON/OFF Auxiliary Power & Ports based on change in Voltage, Temperature, Time or Ping • Smart Battery Charging Based on Temperature • Monitor and Graph a Systems: Power Control Through the Web - Battery Voltage, Current, Temperature & Charge Level • Notify User of any Change of In/Output Power - Input Voltage, Current & Load • Power Cycle Individual PoE & Aux Ports • Change Voltage of Individual PoE & Aux Ports • Customize 200W of Available Power Customizable Email Alerts • Powerful Automated Alerts/Resets • Automated Email Alerts if User Programmed Limits are Exceeded • Smart Battery Charging Based on Temperature • Alerts when: - Battery Voltage Drops Below a User Set Voltage - Temperature Reaches a Min/Max - IP Address Ping Fails (x) Number of Times - Battery Voltage Drops Below a Set Voltage PRODIGY48 Specs Alert Control Interface 220W Total (150W @ 48VDC and 70W @ 24VDC) Total Max Power Output from all output ports (including Aux Output)
(7) RJ45 10/100/1000MB Gigabit Ethernet,
PoE Switch Auto Crossover, Layer 2
PoE Output Voltage 48VDC or 24VDC or OFF (Adjustable in Web Interface)
Port 1-3: 35W Passive PoE+ at 48VDC, 18W at 24VDC
PoE Output Power Ports 4-7: 17W Passive PoE at 48VDC, 9W at 24VDC PoE Power supplied on pins 4,5 (V+) and 7,8 (V-) (Mode B)
Aux DC Output Voltage 24 VDC or 48 VDC (Adjustable in Web Interface)
Aux DC Output Current 2.25A Maximum
Power Control Interface Aux DC Output Controls Set in Web Interface by Temperature, Voltage, or Time
Battery Volt/Current 48 VDC / 20A Max
Battery Type Sealed Lead Acid (SLA) or Lithium Iron (LiFePo4)
Solar Volt/Current Input 62 - 80 VDC, 20A Maximum
Fuse Type 58V 20A Fast Acting Automotive (Littelfuse 142.6185.5206)
Low Voltage Disconnect 45.8 - 47.8 VDC Adjustable in Web Interface
Recovery from LVD 48.1 - 49.2 VDC Adjustable in Web Interface IEC 61000-4-2 (ESD) 15kV (air), 15kV (contact) Port Surge Protection IEC 61000-4-4 (EFT) 40A (5/50ns) IEC 61000-4-5 (Lightning) 25A (8/20µs) Data Graph Interface LED #1 - Overload Warning: (Red) LED #2 - External DC Power ON: (Green) LED Control Lights LED #3 - Aux Out Voltage: (24VDC (Green) (48VDC (Orange) LED #4 - Battery Charging: (Green)
Self Power Consumption 1 - 3 Watts (if PoE ports not in use)
Via Web Browser and SNMP Accessibility Data-Logger FIFO, 15,000 data sets, Programmable log Operating Temperature -76F to 158F (-60C to +70C) Humidity: (RH) 0% - 90% Dimensions (HxWxD) 5.5” x 14” x 5.75” Weight 4.2lbs FCC/CE EN55022 (EMC); CE EN55024 (EMC); Certifications CE/UL EN60950-1 (LVD) Data Monitor Interface