Professional Documents
Culture Documents
SRL-200 MANUAL
Set Button
Press and hold the Set Button in SRL-200 for about three seconds until you hear the ‘Beep’
three times. [Beep, Beep, Beep~~]
(!) Caution
Ensure to release the button after the third ‘Beep’ to enter.
Double-click the Set Button to exit from the Call Bell Registration mode.
[Beep, Beep, Beep]
① Press and hold the Set Button in SRL-200 for about three seconds until you hear the
‘Beep’ three times. [Beep, Beep, Beep~~]
② Press and hold the Set Button again for about two seconds until you hear the ‘Beep’
twice. [Beep, Beep]
(!) Caution
Ensure to release the button after the 5th ‘Beep’ to enter.
1
SRL-200 USER MANUAL
Double-click the Set Button to exit from the Clear Bell Registration mode.
[Beep, Beep, Beep]
Press and hold the Set Button in SRL-200 for about five seconds until you hear the ‘Beep’
five times. [Beep, Beep, Beep~~, Beep~~, Beep~~]
(!) Caution
Ensure to release the button after the 5th ‘Beep’ to enter.
Press and hold the Set Button for about two seconds [Beep, Beep] to select other light effects.
[Ripple effect -> Wave effect -> Normal strobe light effect (default)]
Double-click the Set Button to save and exit from the Setting mode.
[Beep, Beep, Beep]
4. Initialization
How to initialize
① Press and hold the Set Button for about 10 seconds until you hear the ‘Beep’ six times.
[Beep, Beep, Beep~~, Beep~~, Beep~~, Beep~~~~~]
② Press and hold the Set Button again for about 10 seconds until you hear the ‘Beep’
six times. [Beep, Beep, Beep~~, Beep~~, Beep~~, Beep~~~~~]