Professional Documents
Culture Documents
Design feature:
GD series static Spray Balls project a predetermined spray pattern
based on the drilling arrangement of the holes within the ball.
Typically, rinsing is accomplished by creating the desired coverage
and cascading effect required for the relative cleaning task.
Advantages:
Simple, maintenance-free, cost-saving, steam and compressed air injection, self-draining
Technical data
Temperature
30 60 90 120 150 180
(℃)
Pressure 1 2 3 4 5 6
Performance data:
550 4.5
500
4
450
3.5
400
GD25 3 GD25
Spray diameter (m)
Flow rate (L/min)
350
GD30 GD30
300 2.5
GD40 GD40
250 2
GD45 GD45
200
GD50 1.5 GD50
150 GD65 GD65
1
100 GD75 GD75
50 0.5
0 0
2 3 4 5 1 2 3 4
Pressure Pressure (bar)
Design feature:
• Double bearing design with excellent rotation effects, and better
stability and longer service life
• Self-cleaning self-lubricating design
• 360 degree cleaning, cleaning every place in the tank
• Low consumption of liquid, operating at low pressure
• Driven and lubricated by the cleaning fluid
• The compact and hygienic design meets requirements for use in
CIP system
Technical data
Temperatur 30 60 90 120 150 180
Pressure 1 2 3 4 5 6
D50 104 120 140 180 64.5 59 154 1-1/2"-FR 2"-AR 1-1-2"-TF
Please consult for details if need other connection methods, such as NPT thread, tri-clamp, etc
Performance data:
200 4
180
3.5
160
3
140
D10
Spray diameter (m)
Flow rate (L/min)
2.5 D10
120 D15
D15
100 D20 2
D20
80 D25
1.5 D25
D32
60 D32
D38 1
40 D38
D50
0.5
20
0 0
2 3 4 5 1 2 3 5
Pressure (bar) Pressure (bar)
Design feature:
• Double bearing design with excellent rotation effects, and better stability and longer service life
• Self-cleaning self-lubricating design
• 360 degree cleaning, cleaning every place in the tank
• Low consumption of liquid, operating at low pressure
• Driven and lubricated by the cleaning fluid
• The compact and hygienic design meets requirements for use in CIP system
• It will not remain stagnant water in the 5 gallons barrel and ensure the cleaning effect
Technical data
Temperatur 30 60 90 120 150 180
Pressure 1 2 3 4 5 6
Performance data:
30 1.4
25 1.2
1
Spray diameter (m)
Flow rate (L/min)
20
0.8
15
0.6
D19 D19
10
0.4
5 0.2
0 0
1 2 3 5 1 2 3 5
Pressure (bar) Pressure (bar)
Design feature:
• Ideal for rinsing tanks, vessels and containers up to 25' (7.6 m) in diameter
• Especially suited for CIP systems – no motor source is needed due to the reactionary
force of the cleaning liquid to rotate the spray head
• Low pressure for cleaning and rinsing applications
• Long-life material of construction – corrosion-resistant PTFE fluoropolymer resin
• Spray angles range from 180° to 360° to meet most application needs.
Technical data
Temperature 30 60 90 120 150 180
Pressure 1 2 3 4 5 6
Please consult for details if need other connection methods, such as NPT thread
Performance data:
1000 9
900 8
800 7
700
6
Spray diameter (m)
Flow rate (L/min)
DN10 DN10
600
DN15 5 DN15
500
DN20 4 DN20
400 DN25
DN25
3
300 DN40 DN40
2 DN50
DN2
200 DN50
DN2
100 1 DN4
DN5
0 0
1 2 3 5 1 2 3 4
Pressure (bar) Pressure (bar)
Design feature:
• Small diameter to insert in small openings
• Excellent cleaning power
• Constructed of stainless steel 316 SS
• Slide bearing
• Very compact design, self rotating
• Driven and lubricated by the cleaning fluid
• Spray angles range from 180° to 360° to meet most application need.
Technical data
Temperature 30 60 90 120 150 180
Pressure 1 2 3 4 5 6
Please consult for details if need other connection methods, such as NPT thread
Performance data:
60 1.6
1.4
50
1.2
Spray diameter (m)
Flow rate (L/min)
40
1
0 0
1 2 3 4 1 2 3 4
Pressure (bar) Pressure (bar)
Design feature:
• Cleaning with foam and water and for steam sterilisation
• High functional reliability during operation with liquids as well as with
foam from detergent/water mixtures
• Low water and detergent consumption
• Optimum cleaning efficiency due to slow rotation
• Very compact design, self rotating
Technical data
Temperature 30 60 90 120 150 180
Pressure 1 2 3 4 5 6
Please consult for details if need other connection methods, such as NPT thread
Performance data:
60 2.5
50
2
Spray diameter (m)
Flow rate (L/min)
40
1.5
30 FW15 FW15
FW30 1 FW30
20
FW40 FW40
10 0.5
0 0
1 2 3 4 1 2 3 4
Pressure (bar) Pressure (bar)
Design feature:
• Inexpensive rotating nozzle
• Good corrosion resistance
• 360° and partial coverage
• Slide bearing
• Very compact design, self rotating
• Driven and lubricated by the cleaning fluid
Technical data
Temperature 30 60 90 120 150 180
Pressure 1 2 3 4 5 6
Model
Min. tank
1 bar 2 bar 3 bar 5 bar D1 H openings FR-BSPP TF-slip-on
(mm)
SL20 16 24 32 41 27 79 30 1/2"-FR /
Please consult for details if need other connection methods, such as NPT thread
Performance data:
40 1.6
35 1.4
30 1.2
Spray diameter (m)
Flow rate (L/min)
25 1
20 0.8
SL20 SL20
15 0.6
10 0.4
5 0.2
0 0
1 2 3 4 1 2 3 4
Pressure (bar) Pressure (bar)
Design feature:
When a certain fluid pressure is reached, the retractable rotating cleaning nozzle
is automatically extended from the enclosure.
These free-spinning rotating nozzles can be installed flush in the tank wall.
Performance data:
Material: 316L SS
Spray angle: 320°
Max. cleaning diameter: 0.8
Max. operating temperature: 140°
Operating pressure: 2-3 bar
Connection: 1 1/2" tri-clamp (50.5mm)
Installation: operation in any direction is possible
Technical data
Temperature 30 60 90 120 150 180
Pressure 1 2 3 4 5 6
Type
Standard version ST-50 Standard configuration, suitable for working environment below 90 °C
High temperature version ST50-HT Use high temperature engineering materials for 90 °C ~ 250 °C working environment
Performance data:
100 2.5
90
80 2
Spray diameter (m)
70
Flow rate (L/min)
60 1.5
50 ST-50 ST-50
40 ST-100 1 ST-100
30 ST-150 ST-150
20 0.5
10
0 0
1 2 3 5 1 2 3 5
Pressure (bar) Pressure (bar)
Design feature:
When a certain air pressure is reached, the retractable
rotating cleaning nozzle is automatically extended
from the enclosure. When a certain water pressure is reached,
nozzle will start to rotate for cleaning. These free-spinning
rotating nozzles can be installed flush in the tank wall.
• Slide bearing
• Easy to maintain
• Low wear body
• Drainable
• Designed for the food Industrie
Technical data
Temperature 30 60 90 120 150 180
Pressure 1 2 3 4 5 6
120
100
80
Flow rate (L/min)
60
STP-150
40
20
0
1 2 3 5
Pressure (bar)
2.5
Spray diameter (m)
1.5
STP-150
1
0.5
0
1 2 3 5
Pressure (bar)
Design feature:
The liquid flow powers the head by an internal turbine. Either a gear reduction or a hydraulic
brake is used to control the rotation. Hence the produced droplets are bigger and hit the tank
wall with higher velocity. This keeps the speed of the head within its optimal range across a wider
span of pressures, and the nozzles develops more powerful spray.
The new rotating nozzle works very powerfully and efficiently based on the controlled
rotation.costs and time. Compared to conventional rotating cleaning cycle nozzles,
time can be reduced considerably,This saves cleaning fluid, energy
• Excellent cleaning power
• Pressure range up to 15 bar
• Reliable slide bearing
• Driven and lubricated by the cleaning fluid
• Low-wear design, long life bearing
Technical data
Temperature 30 60 90 120 150 180
Pressure 2 4 6 8 10 12
Standard KZ30/
Standard configuration, suitable for working environment below 90 °C
version KZ75
High
Use high temperature engineering materials for 90 °C ~ 250 °C working
temp. KZ30-HT
environment
version
Explosion
Use anti-static materials to avoid static sparks, suited for oils and flammable
-proof KZ30-F
environments
version
Oil
Special engineering materials, strong oil resistance, can be used for oil tank
resistant KZ30-OT
cleaning
version
Performance data:
250 6
5
200
Spray diameter (m)
4
Flow rate (L/min)
150
KZ30 3 KZ30
100 KZ75-70 KZ75-70
2 KZ75-100
KZ75-100
50
1
0 0
2 4 6 8 10 12 2 3 4 5 6 7
Pressure (bar) Pressure (bar)
Design feature:
The liquid flow powers the head by an internal gear. Either a gear reduction or a hydraulic
brake is used to control the rotation. Hence the produced droplets are bigger and hit the tank
wall with higher velocity. This keeps the speed of the head within its optimal range across a wider
span of pressures, and the nozzles develops more powerful spray.
The new rotating nozzle works very powerfully and efficiently based on the controlled
rotation.costs and time. Compared to conventional rotating cleaning cycle nozzles,
time can be reduced considerably,This saves cleaning fluid, energy
• Excellent cleaning power
• High impact flat jet, 360 degree spray, thoroughly clean
• Internal gear reduction make it work more stable
Technical data
Temperature 30 60 90 120 150 180
Pressure 5 10 15 20 25 30
Performance data:
300 9
8
250
7
Spray diameter (m)
6
Flow rate (L/min)
200
5
150 KZH30 KZH30
4
KZH75-70 KZH75-70
100 3 KZH75-100
KZH75-100
2
50
1
0 0
5 8 11 14 17 20 5 8 11 14 17 20
Pressure (bar) Pressure (bar)
Design feature:
The liquid flow powers the head by an internal gear. Either a gear reduction or a hydraulic
brake is used to control the rotation. Hence the produced droplets are bigger and hit the tank
wall with higher velocity. This keeps the speed of the head within its optimal range across a wider
span of pressures, and the nozzles develops more powerful spray.
The new rotating nozzle works very powerfully and efficiently based on the controlled
rotation.costs and time. Compared to conventional rotating cleaning cycle nozzles,
time can be reduced considerably,This saves cleaning fluid, energy
• Excellent cleaning power
• High impact flat jet, 360 degree spray, 100% thoroughly clean
• Internal gear reduction make it work more stable
• Built-in gear reduction mechanism makes tank cleaner work more stable
Technical data
Temperature 30 60 90 120 150 180
Pressure 5 10 15 20 25 30
Please consult for details if need other connection methods, such as NPT thread
Standard
KC5 Standard configuration, suitable for working environment below 90 °C
version
High temp.
KC5-HT Use high temperature engineering materials for 90 °C ~ 250 °C working environment
version
Explosion-
proof KC5-F Use anti-static materials to avoid static sparks, suited for oils and flammable environments
version
Oil resistant
KC5-OT Special engineering materials, strong oil resistance, can be used for oil tank cleaning
version
Performance data:
500 6
450
5
400
350
Spray diameter (m)
4
Flow rate (L/min)
300
250 KC5-100 3 KC5-100
200 KC5-200 KC5-200
2 KC5-300
150 KC5-300
100
1
50
0 0
3 5 7 10 3 5 7 10
Pressure (bar) Pressure (bar)
Design feature:
Driven by cleaning fluid, where the ball of the unit rotates at a slow speed, ensuring
effective impingement of the cleaning solution on the interior walls. SG rotary spray nozzle
offer improved cleaning over traditional static spray balls.
The new rotating nozzle works very powerfully and efficiently based on the controlled
rotation. Compared to conventional rotating cleaning cycle nozzles,
time can be reduced considerably,This saves cleaning fluid, energy
• Excellent cleaning power
• Precision Layout of hole ensure thoroughly cleaning
• Pressure range up to 15 bar
• Reliable slide bearing
• Driven and lubricated by the cleaning fluid
• Low-wear design, long life bearing
Technical data
Temperature 30 60 90 120 150 180
Pressure 2 4 6 8 10 12
Please consult for details if need other connection methods, such as NPT thread
Performance data:
140 4.5
120 4
3.5
Spray diameter (m)
100
Flow rate (L/min)
3
80 2.5
60 SG2 2 SG2
SG4 1.5 SG4
40
1
20 0.5
0 0
2 5 7 10 12 15 2 5 7 10 12 15
Pressure (bar) Pressure (bar)
Standard SG2/
Standard configuration, suitable for working environment below 90 °C
version SG4
High temp.
SG4-HT Use high temperature engineering materials for 90 °C ~ 250 °C working environment
version
Explosion-
proof SG4-F Use anti-static materials to avoid static sparks, suited for oils and flammable environments
version
Oil resistant
SG4-OT Special engineering materials, strong oil resistance, can be used for oil tank cleaning
version
Design feature:
The MG rotating tank cleaning nozzle provides complete tank cleaning that is both
thorough and cost-effective. It is fluid driven with external gears and was specifically
designed to fit a 95 mm opening, for cleaning of totes, IBCs and other limited
access vessels. This model also incorporates a set of bevel gears which provide
a complete 360-degree indexing pattern every 45 revolutions and has an effective spray
diameter of 30 ft (9.2 m).
Technical data
Pressure 2 4 6 8 10 12
8
100
6
MG2-2 MG2-2
4
50 MG5-2 MG5-2
MG8-2 2
MG8-2
0 0
3 5 8 10 12 3 5 8 10 12
Pressure (bar) Pressure (bar)
300 10
Spray diameter (m)
250
Flow rate (L/min)
8
200
6
150 MG2-4 MG2-4
4
100 MG5-4 MG5-4
50 2
MG8-4 MG8-4
0 0
3 5 8 10 12 3 5 8 10 12
Pressure (bar) Pressure (bar)
Working principle
The series of 3D tank cleaning nozzle drive the turbine through the cleaning fluid to drive
the internal speed reduction mechanism, and the gear mechanism operates according to the
set track to realize the revolution and the rotation, thereby achieving 360°thorough cleaning.
Design feature:
• Optimized structural design results in a water jet that produces greater impact
• Excellent sealing design, only 1% leakage, thus saves cleaning fluid.
• Independent gearbox design protects gear from damage and can work in poor water quality
• Overall optimized design
• Small diameter to insert in small openings of 45MM
Technical data
Temperature 30 60 90 120 150 180
Pressure 3 5 10 20 30 50
Performance data:
70 2
1.8
60
1.6
50 1.4
40 1.2
1
30 DG2-2-2 DG2-2-2
0.8
20 DG2-2-3 0.6 DG2-2-3
0.4
10
0.2
0 0
2 5 7 10 15 20 2 5 7 10 15 20
Pressure (bar) Pressure (bar)
100 2
90 1.8
80 1.6
Spray diameter (m)
Flow rate (L/min)
70 1.4
60 1.2
50 1
40 DG2-4-2 0.8 DG2-4-2
30 DG2-4-3 0.6 DG2-4-3
20 0.4
10 0.2
0 0
2 5 7 10 15 20 2 5 7 10 15 20
Pressure (bar) Pressure (bar)
Working principle
The series of 3D tank cleaning nozzle drive the turbine through the
cleaning fluid to drive the internal speed reduction mechanism, and
the gear mechanism operates according to the set track to realize the
revolution and the rotation, thereby achieving 360°thorough cleaning.
Design feature:
• Optimized structural design results in a water jet that produces greater impact
• Excellent sealing design, only 3% leakage, thus saves cleaning fluid.
• Independent gearbox design protects gear from damage and can work in poor water quality
• Overall optimized design,able to insert in small openings of 86MM
Technical data
Temperature 30 60 90 120 150 180
Pressure 3 5 10 20 30 50
High temp. version DG5-HT Use high temperature engineering materials for 90 ° C ~ 250 ° C working environment
Explosion-proof version DG5-F Use anti-static materials to avoid static sparks, suited for oils and flammable environments
Oil resistant version DG5-OT Special engineering materials, strong oil resistance, can be used for oil tank cleaning
Dimensions:
Performance data:
120 9
8
100
7
80 6
5 DG5-2-4
60 DG5-2-4
4 DG5-2-5
DG5-2-5
40 3 DG5-2-6
DG5-2-6 2
20 Rinsing
1
0 0
2 5 7 10 15 20 2 5 7 10 15 20
Pressure (bar) Pressure (bar)
200 9
180 8
160 7
Spray diameter (m)
Flow rate (L/min)
140 6
120 DG5-4-4
5
100 DG5-4-4
4 DG5-4-5
80 DG5-4-5
60 3
DG5-4-6
40 DG5-4-6 2
Rinsing
20 1
0 0
2 5 7 10 15 20 2 5 7 10 15 20
Pressure (bar) Pressure (bar)
Working principle
The series of 3D tank cleaning nozzle drive the turbine through the
cleaning fluid to drive the internal speed reduction mechanism, and
the gear mechanism operates according to the set track to realize the
revolution and the rotation, thereby achieving 360°thorough cleaning.
Design feature:
• Optimized structural design results in a water jet that produces greater impact
• Excellent sealing design, only 5‰ leakage, thus saves cleaning fluid.
• Independent gearbox design protects gear from damage and can work in poor water quality
• Overall optimized design,able to insert in small openings of 98MM
Technical data
Temperature 30 60 90 120 150 180
Pressure 3 5 10 20 30 50
Performance data:
300 16
14
250
200
10
150 8
DG15-6 DG15-6
6
100 DG15-8 DG15-8
4
50
2
0 0
2 5 7 10 15 20 2 5 7 10 15 20
Pressure (bar) Pressure (bar)
400 16
350 14
Spray diameter (m)
300 12
Flow rate (L/min)
250 10
200 8
DG15-4-6 DG15-4-6
150 6
DG15-4-8 DG15-4-8
100 4
50 2
0 0
2 5 7 10 15 20 2 5 7 10 15 20
Pressure (bar) Pressure (bar)
Working principle
The series of 3D tank cleaning nozzle drive the turbine through the
cleaning fluid to drive the internal speed reduction mechanism, and
the gear mechanism operates according to the set track to realize the
revolution and the rotation, thereby achieving 360°thorough cleaning.
Design feature:
• Optimized structural design results in a water jet that produces greater impact
• Excellent sealing design, only 3% leakage, thus saves cleaning fluid.
• Independent gearbox design protects gear from damage and can work in poor water quality
• Overall optimized design,able to insert in openings of 158MM
Technical data
Temperature 30 60 90 120 150 180
Pressure 3 5 10 20 30 50
Performance data:
350 35
300 30
250 25
DG20-2-6
200 DG20-2-6 20
DG20-2-7
150 DG20-2-7 15
DG20-2-8
100 DG20-2-8 10
DG20-2-10
DG20-2-10 5
50 Rinsing
0 0
2 5 7 10 15 20 2 5 7 10 15 20
Pressure (bar) Pressure (bar)
600 35
500 30
Spray diameter (m)
Flow rate (L/min)
25
400 DG20-4-6
DG20-4-6 20
300 DG20-4-7
DG20-4-7 15
200 DG20-4-8
DG20-4-8 10
DG20-4-10
100 DG20-4-10 5
Rinsing
0 0
2 5 7 10 15 20 2 5 7 10 15 20
Pressure (bar) Pressure (bar)
Working principle
The symmetrically opposed nozzles are driven by an integrated turbine and
gearing unit providing safe and reliable starting and stable speed control.
Rotation in the horizontal plane combined with vertical movement provides an
almost spherical cleaning pattern. Speed will vary slightly according to nozzle
size and pressure with one full cycle taking approximately 8-30 minutes.
Design feature:
• High performance cleaning
• Very high cleaning performance already at low pressure
• Driven and lubricated by the cleaning fluid
• Systematically cleans the entire tank interior(360°)
• Robust, low-maintenance stainless steel construction
• Driven by an integrated turbine and gearing unit
Technical data
Temperature 30 60 90 120 150 180
Pressure 3 5 10 20 30 50
Feature cleaning cycle time:8-30 minutes , min. tank openings: 185mm, weight:
18kg , connection size: 2"
Dimensions:
Performance data:
1000 50
900 45
800 40
Spray diameter (m)
Flow rate (L/min)
700 35
600 DG30-8 30 DG30-8
500 25
DG30-10 DG30-10
400 20
300 DG30-12 15 DG30-12
200 DG30-16 10 DG30-16
100 5
0 0
3 5 7 10 15 3 5 7 10 15
Pressure (bar) Pressure (bar)
Working principle
The symmetrically opposed nozzles are driven by an integrated turbine and
gearing unit providing safe and reliable starting and stable speed control.
Rotation in the horizontal plane combined with vertical movement provides an
almost spherical cleaning pattern. Speed will vary slightly according to nozzle
size and pressure with one full cycle taking approximately 8-30 minutes.
Design feature:
• High performance cleaning
• Very high cleaning performance already at low pressure
• Driven and lubricated by the cleaning fluid
• Systematically cleans the entire tank interior(360°)
• Robust, low-maintenance stainless steel construction
• Driven by an integrated turbine and gearing unit
Technical data
Temperature 30 60 90 120 150 180
Pressure 3 5 10 20 30 50
Feature cleaning cycle time:8-30 minutes , min. tank openings: 185mm, weight:
18kg , connection size: 2"
Dimensions:
Performance data:
1000 50
900 45
800 Spray diameter (m) 40
Flow rate (L/min)
700 35
600 DG30-8 30 DG30-8
500 25
DG30-10 DG30-10
400 20
300 DG30-12 15 DG30-12
200 DG30-16 10 DG30-16
100 5
0 0
3 5 7 10 15 3 5 7 10 15
Pressure (bar) Pressure (bar)
Working principle
The TCM45 is a dual nozzle automated tank cleaning machine constructed of
316L stainless steel and other highly corrosion resistant materials.
It is a hydraulically driven rotary tank cleaning machine that revolves 360°in both
horizontal and vertical planes, systematically cleans the entire tank interior, thorough
scouring pattern covering all interior tank surfaces in one complete cycle.
The TCM45 is an integrated turbine class type of tank cleaning machine which
designed for large tanks.
Design feature
• Very high cleaning performance already at low pressure
• Driven and lubricated by the cleaning fluid
• Systematically cleans the entire tank interior(360°)
• Robust, low-maintenance stainless steel construction
• Driven by an integrated turbine and gearing unit
Technical data
Temperature 30 60 90 120 150 180
Pressure 3 5 10 20 30 50
Performance data:
600 70
500
Spray diameter (m) 60
TCM
Flow rate (L/min)
50
400
TCM45-2-9 TCM
TCM45-2-9 40
300 TCM45-2-10
TCM45-2-10 30
200 TCM45-2-11
TCM45-2-11 20
TCM45-2-12
100 TCM45-2-12
10 Rinsing dia. TCM
0 0 TCM
3 5 7 9 12 15 3 5 7 10 15 20
Pressure (bar) Pressure (bar)
Type
model feature
Standard version TCM45 Standard configuration, suitable for working environment below 90 °C
TCM45-
High temp. version HT Use high temperature engineering materials for 90 ° C ~ 250 ° C working environment
Explosion-proof version TCM45-F Use anti-static materials to avoid static sparks, suited for oils and flammable environments
TCM45-
Oil resistant version OT Special engineering materials, strong oil resistance, can be used for oil tank cleaning