Professional Documents
Culture Documents
i Affiliate Disclosure
Battery
Reconditioning
Epsom Salt
An easy, step‐by‐step guide to recondition dead
batteries with epsom salt at home.
B
attery reconditioning with Epsom salt is a cost‐efficient method of extending and reviving
the natural life of your lead‐acid battery. Like me, I am quite stingy when it comes to
paying a hefty price for brand new items when I can still squeeze some juice from my old
stuff.
There are several other additives you can use in making your electrolyte solution. However, I am
to focus on Epsom salt today in my sharing. Above all things, you need to secure your safety
before doing the whole process at home. Battery solutions are made from acidic liquids, so you
need to wear your gloves and goggles for
protection.
I have here some of the things you need to know about battery reconditioning Epsom salt. Just
continue reading up to the last portion of my article.
Expand Offer
⌃
By learning the concepts of battery reconditioning Epsom salt, you can start your own business
and earn a decent profit.
Reduce Waste
There are millions of car owners all over the United States. If all of them would replace their old
car cells, then that is around 1million lead‐acid battery waste for disposal. To help minimize this
waste, reconditioning your 12V car cells will be a good practice.
Car battery solutions are mostly made up of sulfuric acid, which is highly corrosive and generates
some fumes which you must not inhale. To protect yourself, wear the proper safety attire, that is,
goggles, gloves, and apron.
When doing the reconditioning process, make sure you are in a well‐ventilated area with an
available supply of water. Likewise, avoid directly pouring out the old electrolyte solution as it
might splatter everywhere and in your clothes.
2. Baking soda
3. Distilled water
6. Voltmeter
7. Bucket
10. Goggles
11. Gloves
12. Apron
14. funnel
Procedure
STEP 1 Wear your protective safety attire – gloves, apron, and goggles.
STEP 2 Remove the battery from your car and place it on your working table.
STEP 3 Remove the corrosion in the battery terminals. Prepare a baking soda ﴾2 parts﴿ and
distilled water solution ﴾1 part﴿. The resulting solution is sticky and paste‐like.
STEP 4 Get your toothbrush and dip it into the baking soda solution. Then brush the battery
terminals to remove the corrosion.
STEP 5 WIf the corrosion is hard to remove, use steel wool or sandpaper.
STEP 6 After, remove the battery caps using a flat head screw and place it in one container to
avoid losing them.
STEP 7 Gently tilt the battery and pour the old electrolyte solution in your bucket.
STEP 8 Depending on the volume of the battery solution, you can pour 1 lb of baking soda into
the bucket to neutralize the acid.
STEP 9 You can prepare another baking soda ﴾1 part﴿ and distilled water solution ﴾1 part﴿. Use
your funnel, and pour some volume in each cell. Return and close back all battery caps, and shake
the battery for 30 seconds to 1 minute. In this way, the lead sulfate solids in the plates are
dissolved. You can do this process twice. Remove the battery caps, and pour out the solution into
the same bucket.
Heat 1/2quart of distilled water to 66 degrees Celsius. We do this to ensure all salts are
dissolved later while mixing.
Dissolve 7 to 8 ounce of Epsom salt into the warm distilled water and stir until completely
dissolved.
You can repeat the process if not all cells in the battery are filled with the new electrolyte
solution.
STEP 11 Use your funnel, and pour the prepared Epsom salt solution into each cell of your car
battery.
STEP 12 Return and secure the battery caps back into your car battery.
STEP 13 Connect your battery charger to the 12V car battery, and put it in slow charge mode
12V/2amp. Let it charge for 12 to 24 hours.
STEP 14 After charging, measure the voltage of the battery using a voltmeter. A battery that is in
full capacity and good condition will have a reading of 12.4V to 12.43V.
STEP 15 If the battery did not reach that voltage reading, you need to discharge the battery and
recharge it again adequately.
STEP 16 Place the battery in a load test. You can buy a battery load tester from any hardware
store. It comes at an affordable price only.
Epsom Salt Battery Myth
I still hear some rumors about the Epsom salt battery myth, and if it works for reconditioning.
Here, I have a few ideas on why it works in bringing back the life of your car battery.
Epsom salt has the chemical name Magnesium sulfate. This salt has many applications, and its
food grade brand is used for cooking. During the reconditioning process, one thing that must be
remedied is the sulfation in the plates.
Sulfation happens when the solid lead sulfate builds around the battery plates inside. Epsom salt
or Magnesium sulfate solution is capable of softening these solid salts.
Mythbusters:
Magnesium sulfate and lead sulfate undergoes a single replacement reaction. Magnesium metal is
more reactive than lead, so it is capable of replacing it in the plates. Take note; Magnesium sulfate
is highly soluble in water. With this, lead metal is gradually restored and removed around the
plates.
Overall, the Epsom salt solution helps in the desulfation process and serves as a good conductor
for current.
You can charge your car batteries with voltages higher than 12V – e.g., 15V. However, you need to
have close monitoring to avoid overcharging, and it must not reach 100%full capacity.
Meanwhile, if you plan to leave it for charging, then the suitable float voltage is 13.6V to 13.8V.
After starting the engine, how long do you think until the battery recharges?
A general answer for this is around 8 to 99 seconds after starting the engine.
Typically, you need to add the water before charging the battery. During the charging process,
bubbles are created, which helps mix water and battery acid.
If the voltage reading of your battery is below 10V, then you consider it empty or fully discharged.
You have to make a mixture of 4 ounces of Epsom salt and 4 cups of water. Now you have to stir
both the ingredients so that the water becomes clear and transparent. Now, you can use this
solution in your battery. Thus, as an answer to the question, a single battery will require 4 ounces
of Epsom salt.
Yes, you may use aspirin to make your battery work. But, make sure to put only two aspirin tablets
in the solution. Also, keep in mind that using aspirin in the battery to make it work temporarily can
reduce the life of the cell in the long run.
For this, you need to have a battery charger that comes with the advanced desulfate mode. Now,
let it set in charge, and you can observe the battery getting charged at its highest voltage.
Thereafter it will get to its disulfate mode.
Wrap Up
Thank you for reading through the whole section of my article. I hope I was able to share good
ideas about the topic. There are so many things to gain from reconditioning batteries.
For a more in‐depth discussion on reconditioning other batteries, you can check out Ez Battery
Review as they provide flexible courses about it. They have excellent learning materials, and the
teacher is available at all times if you need any help.
The learnings you get from these courses can be applied and made profitable if you like. I have
other articles that you can check out for more information.
Get it now ➜
Further reading
Golf Cart Battery Reconditioning
Kevin Miller ‐ October 10, 2019 ‐ No Comments
Get it now ➜ Get it now ➜ Further reading Access now Is it Possible to Revive a
Dead Batteries?
How to Reconditioning a Hybrid Battery Get it now ➜ Further reading Access now Is
it Possible to Revive a
Get it now ➜ Further reading Access now Is it Possible to Revive a Dead Batteries?
See For Yourself Close
Leave a Comment
Name * Email *
Post Comment
Post Comment