Professional Documents
Culture Documents
AREA ELECTRICAL
COMPETENCY UNIT
ELECTRICAL
ELECTRICAL
THREE PHASE BUILDING
INSTALLATION &
WIRING TESTING AND AUTOMATION
MAINTENANCE
COMMISSIONING SYSTEM
SUPERVISORY
INSTALLATION
F432-005-3:2019-C05 F432-005-3:2019-C06 F432-005-3:2019-C06
1
F432-005-3:2019
Hasil Pemurnian : Curriculum of Competency Unit
Three Phase Drawing
SECTION (F) Construction
AREA Electrical
LEARNING OUTCOMES The learning outcomes of this competency are trainees enable to produce a three phase drawing
consisting of layout plan that shows installation location and a three phase schematic diagram that
shows information regarding wiring installation that is required by wireman according to MS IEC
60364, MS 1979:2007, MS 1936:2006, Electricity Supply Act 1990 (Act 447), Electricity
Regulation 1994, The Electricity Ordinance- Chapter 50 (Revised 2003), Electricity Rules 1999,
Electricity (State Grid Code) Rules 2003 and relevant regulatory body.
2
F432-005-3:2019
WORK RELATED RELATED SKILLS ATTITUDE/ ASSESSMENT CRITERIA
ACTIVITIES KNOWLEDGE SAFETY/
ENVIRONMENT
1. Prepare three phase 1.1. Introduction to 1.1. Carry out site survey. ATTITUDE 1.1. Introduction to electric
drawing requirements. electric 1.2. Calculate Total 1.1. Attention to schematic diagram and layout
schematic Connected Load details when dealing plan explained.
diagram and (TCL). with specifications and 1.2. Site information requirement
layout plan: 1.3. Calculate current data. explained.
• Electrical diversity value. 1.3. Types of load explained.
symbols. 1.4. Determine maximum SAFETY 1.4. Diversity factor explained.
• Drawing demand. 2.1 Adhere to specific 1.5. MS IEC 60364 explained.
situational safety 1.6. Electricity Supply Act 1990
scale.
requirements. (Act 447) explained.
1.2. Site information
2.2 Apply safe working 1.7. Drawing method explained.
requirement 1.8. Drawing utensils explained.
which include: culture.
1.9. Drawing software
• Site location. explained.
• Logistic. ENVIRONMENT
• Site layout. Not Available.
1.3. Types of load:
• Lighting.
• Power.
• Electrical
appliances.
3
F432-005-3:2019
WORK RELATED RELATED SKILLS ATTITUDE/ ASSESSMENT CRITERIA
ACTIVITIES KNOWLEDGE SAFETY/
ENVIRONMENT
2. Perform three phase 2.1. Relevant 2.1. Draw layout ATTITUDE 2.1. Relevant drawing guideline
drawing. drawing plan. 2.1. Attention to details explained.
guideline. 2.2. Determine final when dealing with 2.2. Three phase blueprints
2.2. Three phase circuit distribution. specifications and explained.
blueprints. 2.3. Draw three line data. 2.3. Layout plan elements
2.3. Layout plan schematic diagram. explained.
elements which SAFETY 2.4. Three line schematic
include: 2.1. Adhere to diagram elements
specific explained.
• Symbols.
situational safety 2.5. Circuit connection
• Loads. technique explained.
requirements.
• Accessories. 2.2. Apply safe 2.6. Accessories fittings
• Legends. working culture. explained.
2.4. Three line 2.7. Building structure
schematic ENVIRONMENT explained.
diagram Not Available. 2.8. Layout drawing elements
such as standard symbol,
cable size, drawing scale,
current value, sensitivity.
4
F432-005-3:2019
WORK RELATED RELATED SKILLS ATTITUDE/ ASSESSMENT CRITERIA
ACTIVITIES KNOWLEDGE SAFETY/
ENVIRONMENT
3. Propose three phase 3.1. Presentation 3.1. Compile three phase ATTITUDE 3.1. Presentation technique
drawing paperwork. technique. drawing paperwork. 3.1. Attention to details explained.
3.2. Sample of three 3.2. Check drawing for when dealing with 3.2. Cover letter, draft
phase drawing error. specifications and drawing and checklist
paperwork. 3.3. Present drawing data. prepared.
for verification 3.3. Three phase drawings
(manual/CAD). SAFETY presented (manual/ CAD).
3.1. Attention to details
when dealing with
specifications and
data.
3.2. Adhere to specific
situational safety
requirements.
3.3. Apply safe
working culture.
ENVIRONMENT
Not Available.
Employability Skills
5
F432-005-3:2019
Core Abilities
• Please refer NCS- Core Abilities latest edition.
Competency Weightage
6
F432-005-3:2019
The following table shows the percentage of training priorities based on consensus made by the Standard Development Committee (SDC).
7
F432-005-3:2019
F432- Three Phase Motor 2. Carry out three phase
15% 15%
005- System motor installation and
3:2019- Installation termination.
C04 3. Carry out three phase motor
60%
control installation.
8
F432-005-3:2019