Professional Documents
Culture Documents
GUARDII +
Customer value
>65k #1 >660k
Global sensor installs Online monitoring provider for Test results in Iris Power’s
on rotating machines motor and generator windings Partial Discharge database
Qualitrol - Iris Power
GuardII+ Asset Monitoring Solution for Generators and High Voltage Motors
3
Condition based maintenance detects the onset Using condition based maintenance, equipment
of problems and repairs can be carried out is removed from service less frequently (only if
before major damage occurs. condition of machine is deteriorated) as
compared to the other maintenance schemes.
Repair costs in detecting problems at an early Maximize revenue from the asset by reducing
stage are only a fraction of the cost incurred if the risk of asset failures and schedule
failure occurs during normal operation of an maintenance activities to minimize outage cost.
asset.
Qualitrol - Iris Power
4 GuardII+ Asset Monitoring Solution for Generators and High Voltage Motors
GuardII +
Product Summary
Trend Monitor
At-a-glance Ability to monitor
status information multiple assets
for every asset and multiple
in a database technologies
Diagnostics Configure
Download Add and configure
diagnostics data assets, sensors,
from the GuardII+ continuous and
monitor portable monitors
Qualitrol - Iris Power
GuardII+ Asset Monitoring Solution for Generators and High Voltage Motors
7
PD Endwinding
Sensors Vibration Sensors
Epoxy Mica Capacitors (EMC) and Stator Slot The Endwinding Vibration sensors are non-
Couplers (SSC) are high frequency sensors metallic fiber optic accelerometers used to
used to detect Partial Discharges (PD) measure vibration of the generator stator
occurring within stator windings of motors and endwindings. The sensors are able to
generators. The number of installed PD sensors simultaneously measure vibration in the radial
may vary on machine type and size and vary and tangential directions safely in high voltage
from 3 to 24 sensors per machine. and magnetic fields found in air-cooled as well
as hydrogen cooled generators.
The Rotor Flux sensor detects shorted rotor Existing grounding brush(es) are equipped with
windings in generators and synchronous shunt(s) to measure current on the motor or
motors by measuring air gap magnetic flux. It generator shaft. Additional voltage brushes
senses the magnetic field emanated from each might be installed to detect high shaft voltage.
rotor pole to determine the presence of shorted The monitor detects high voltage and current
rotor turns. on the motor or generator from poor shaft
grounding. Shaft voltage monitoring will also
provide additional benefits like identifying the
quality of asset repairs or maintenance on
grounding brushes.
The Guard II+ monitor takes signals from these sensors and creates
patterns of asset activity for the asset’s condition analysis.
Contact Us
Version 1.0