Professional Documents
Culture Documents
Cooling Tower Inspection Checklist
Cooling Tower Inspection Checklist
This checklist is intended to be used as a guide only. This checklist may not cover all potential issues and should not be relied upon as a substitute for Au-
thorized Service Provider's professional judgment. Authorized Service Provider should report on all issues. Any issues that are identified for which a space
is not otherwise provided in the checklist, should be noted in the Other Component sections or in a supplementary document.
1 2 3 Comments
Structure
Casing Material
Structural Material
Fan Deck Material
Stairway q Material
Ladder q Material
Handrail q Material
Interior Walkway q Material
Cold Water Basin Material
Silt, Debris Buildup
1 2 3 Comments
Mechanical Equipment
Speed Reducer Type: Belt q Gear q Direct Drive q
Belt Drive Unit
Belt Designation
Fan Sheave Designation
Motor Sheave Designation
Gear Drive Unit
Manufacturer Model Ratio
Oil Level: Full q Add Immediately q Low, Check Again Soon q
Oil Condition: Good q Contains Water q Contains Metal q Contains Sludge q
Oil Type Used
Seals
Backlash
Fan Shaft Endplay
Unusual Noises? No q Yes q Action Required
Drive Shaft
Manufacturer Material
Fan
Fan Type: Propeller q Blower q
Manufacturer Fixed Pitch q Adjustable Pitch q
Diameter Number of Blades
Blade Material
Hub Material
Hub Cover Material
Blade Assembly Hardware
Tip Clearance " min " max
Vibration Level
Fan Cylinder Height
Mechanical Equipment Support
Oil Fill and Drain Line
Oil Level Sight Glass
Vibration Limit Switch
Motor
Manufacturer
Name Plate Data: HP RPM Phase Hz Volts
F L Amps Frame SF Special Info.
Last Lubrication — Date
Grease Used — Type
Unusual Noises? No q Yes q Action Required
Unusual Vibration? No q Yes q Action Required
Unusual Heat Build-up? No q Yes q Action Required
Make-up Valve
Other Component
Other Component
SPX Cooling Technologies, Inc. • 7401 W. 129th Street • Overland Park, KS 66213 USA • 913 664 7400