Professional Documents
Culture Documents
EAS00075
CHANGING THE ENGINE OIL
1. Start the engine, warm it up for several min-
utes, and then turn it off.
1 2. Place a container under the engine oil drain
bolt.
3. Remove:
• dipstick 1
• engine oil drain bolt 2
(along with the gasket)
• engine oil drain plug 3
• O-ring 4
3 2 • spring 5
• engine oil strainer 6
NOTE:
When only changing the engine oil, remove
engine oil drain bolt only.
4. Drain:
• engine oil
(completely from the crankcase)
5. Check:
6 • engine oil strainer
Dirt → Clean.
5 6. Check:
• engine oil drain bolt gasket
4 Damage → Replace.
7. Install:
3
• engine oil drain bolt
(along with the gasket)
20 Nm (2.0 m · kg, 14 ft · lb)
T.
R.
• spring
• engine oil strainer
• O-ring New
• engine oil drain plug
20 Nm (2.0 m · kg, 14 ft · lb)
T.
R.
3 - 17