You are on page 1of 2

DRE Waveline Touch

Patient Monitor SPECIFICATIONS

User-friendly, touch-screen monitor


Weight:
The fully-functional Waveline Touch features a 12.1” color TFT 11 lbs (5 kg)
display with a touch-screen interface. It features multi-lead ECG
monitoring, ST segment monitoring and 72 hours trend data
analysis.
Height:
~11”

FEATURES Width:
~12.6”
Masimo SET® Pulse Oximetry — ask Built-in thermal recorder
your DRE representative for details
Networkable with a central Depth:
EtCO2 Option allows compliance monitoring system via a wireless or ~6.2”
with ASA wired network
12.1” color TFT display with a S-T Segment and 72 hours trend TFT Touch-screen Display:
touch-screen interface data analysis 12.1”
Multi-lead ECG monitoring Drug dose calculations
NIBP list display Optional Plug-In Anesthesia Gas
Module expands measurement Source:
OxyCRG dynamic view display
capabilities External AC power
Compact design convenient for or internal battery
Built-in battery (optional)
mobile monitoring
Multi-lingual settings AC Power:
100 - 240VAC,
50/60Hz, <150VA

Battery:
Rechargeable Lead-Acid

Operating Time:
1 hour

657-2018-06-25

1800 Williamson Ct. • Louisville, Kentucky 40223 USA


800-923-8413 • 502-244-6345 • FAX: 502-244-0369
www.avantehs.com
Performance NIBP (Suntech)
Trace: 4, 6 or 8 waveforms ECG Trend Time: 72 hours Measuring Technology: Measuring Range:
(I, II, III, aVR, aVL, aVF, V1-V6), automatic oscillating measurement Adult/Pediatric Mode:
PLETH, RESP, IBPx2, ETCO2 Recorder:
SYS: 40 ~ 250 (mmHg)
Built-in, thermal array, Cuff Inflating: < 30s-0-300 mmHg,
DIA:15 ~ 200 (mmHg)
Indicator: 2 channels standard adult cuff
Neonatal Mode:
Alarm indicator Record width: 48mm Measuring Period: AVE < 40s SYS: 40 ~ 135 (mmHg)
Power indicator Recorder paper: 50mm DIA: 15 ~ 100 (mmHg)
QRS beep and alarm sound Mode: Manual, Auto, STAT
Record speed: 25mm/s,
Accuracy - Pressure:
50mm/s Measuring Interval in AUTO
Mode: 2 min ~ 4 hrs Maximum Mean error: ±5mmHg
Maximum Standard deviation:
ECG Pulse Rate Range: 30 ~ 250 (bpm) 8mmHg
Resolution: 1mmHg Alarm Limit Setting:
Input: 3-lead ECG cable and Sweep Speed: 12.5, 25 and 50 Overpressure Protection: SYS 50-240 mmHg,
standard AAMI line for connection mm/s Adult Mode: 280 (mmHg) DIA 15-180 mmHg
Lead Choice: I, II, III, aVR, aVF, HR Display Range: 30 - 300bpm Neonatal Mode: 150 (mmHg)
aVL, V
Accuracy: ±1bpm or ±1%,
Gain Choice: x0.5, x1.0, x2.0 whichever is greater
Frequency Characteristic: Alarm Limit Range Setting: RESP
0.05-40 Hz Upper limit 80 - 400bpm,
ECG Waveforms: 7 channels Lower limit 20 - 150bpm Measure Method: RA-LL Alarm Limit Setting:
Input - (Optional): 5-lead ECG impedance Upper limit 6 ~ 120 rpm,
Penetration Voltage: 4000VAC
50/60Hz cable and standard AAMI line for Range: 0 ~ 120 rpm Lower limit 3 ~ 120 rpm
connection
Sweep Speed: 12.5 and 25 mm/s Accuracy: ±3 rpm

Masimo SET SpO2


TEMP
SpO2 Accuracy (non-motion): PR Accuracy (non-motion):
Adult Pediatric: 70~100%:± 2%, Neonate: 70~100%: ± 3%, Range: 25° - 50° C Display Resolution: 0.1°C
0~69%: unspecified 0~69% : unspecified
Neonate: 70~100%: ± 3%, Adult Pediatric Neonate: Accuracy: Alarm Limit Setting:
0~69%: unspecified 25~240 bpm: ±3 bpm ± 0.2°C (25.0 ~ 34.9°C) Upper limit 0 ~ 50°C,
± 0.1°C (35.0 ~ 39.9°C) Lower limit 0 ~ 50°C
SpO2 Accuracy (motion): PR Accuracy (motion):
± 0.2°C (40.0 ~ 44.9°C)
Adult Pediatric: 70~100%: ±3%, Adult Pediatric Neonate: Channel: 2 channels
0~69%: unspecified 25~240 bpm: ±5 bpm ± 0.3°C (45.0 ~ 50.0°C)
Neonate: 70~100%: ± 3%,
Measuring Range:
0~69% : unspecified
SpO2: 1~100 %
SpO2: ±2 % PR: 25~240 bpm Optional
PR: ±3 bpm Perfusion: 0.02~20 %
Low Perfusion Performance: EtCO2 and IBP
Modes:
Averaging mode: 2,4,8,10,12, >0.02 % Pulse Amplitude and %
14 and 16s Transmission >5
Sensitivity: Normal, APOD and
Maximum

1800 Williamson Ct. • Louisville, Kentucky 40223 USA


800-923-8413 • 502-244-6345 • FAX: 502-244-0369
www.avantehs.com

You might also like