Professional Documents
Culture Documents
Click OK to continue.
Please click “close” button when you see the status is ready.
In scale side. BACKUP
You need to prepare another usb flash disk to backup.
Before you turn on scale, you need to connect the keyboard and two usb flash disks to
the scale.
The steps to backup.
1. when you turn on the scale, you need to enter the BIOS menu.(press “esc” key in
keyboard when you turn on the scale to enter BIOS menu).
The picture 1 is GENE-APL5 mainboard. The picture 2 is BT01 mainboard.
Picture 1 Picture 2
2. Select the 4GB usb flash disk as the Boot Option #1
3. Click YES to confirm. Then the scale will restart.
4. When you restart the scale you will see the screen.
Select the language. Click “Enter” key in keyboard to confirm.
5. Press “Enter” key in keyboard to confirm
keyboard).
2. Select the 4GB USB flash disk as the Boot Option #1.
3. Save and reset.
6. Select language.
7. Press “Enter” key to confirm.
25. Wait.
26. Click “Y” key and “Enter” to confirm.
27. Click “Y” key and “Enter” to confirm.
28. Wait.