Professional Documents
Culture Documents
Hard Hats: Always in all oil and gas fields and other workplaces 1 each per person for the two years
ANSI Z-89 Class A, B, G, or E Type 1 or 2 or equivalent
V-Gard Protective Helmets, MSA Exceptions are identified contract. Any damage will be replaced.
1 pair per person for six month period
Safety Glasses: ANSI Z87.1 1989, BS 2092 C-D or equivalent Always in all oil and gas fields and other workplaces
maximum. Any damage will be
Clear or dark lense, AO Must have sideshields Exceptions are identified
replaced.
1 pair per person for six month period
Steel Toe Footwear: ANSI Z 41.1-1967, SNI Always in all oil and gas fields and other workplaces
maximum. Any damage will be
Unicorn or Chetah Product or equivalent Exceptions are identified
replaced.
During grinding, drilling, cutting, and sawing
operations
Suitable material. Will be issued as required.
Face Shields Operations where chemicals hazardous to the eyes
ANSI Z87.1 1989, BS 2092 C-D or equivalent
are handled
Must be worn with safety glasses or goggles
Suitable material, Flexible During burning operations where the danger of
Gas Welding & Cutting Goggles Will be issued as required.
fitting, regular ventilation. having molten metal or slag fly into eye exists
ANSI Z87.1 1989, BS 2092 C-D or equivalent
Suitable material, Flexible To protect chemical burn to eyes and eye injuries in
Chemical, Impact and Dust Goggles, Will be issued as required.
fitting, regular ventilation. restricted or confined areas
Monogoggles
ANSI Z87.1 1989, BS 2092 C-D or equivalent
Properly tinted lenses Electric (arc) welding Will be issued as required.
Welding Helmet
ANSI Z87.1 1989, BS 2092 C-D or equivalent Must be worn with safety glasses or goggles
Activities that exceed six feet in height above ground
or work surface whenever there are unsecured sides
Fall Protection: Will be issued as required.
Full-body harnesses which meet ANSI 10.14 type 1 and edges
Body Harness
Retractable lanyards (single or double) when in a
man basket, man lift, or any moving enclosure
Long sleeve shirts required when grinding, welding, Coverall will be issued 3 pairs per
No highly flammable
or burning; Shirt’s sleeves and front must be buttoned person per year.
Body Protection: fabric such as nylon,
No tank tops, halter tops, muscle shirts, or short Raincoat and jacket will be issued 1
Coverall, raincoat, jacket rayon, or dacron allowed.
pants each per person for six month period.
ANSI 10.14 or equivalent.
Shirt tails must be tucked inside trousers
Respirator Protection: See requirements for Use General spray painting requires half-face negative Will be issued as required.
Respirator, dust foe ANSI Z 88.2-1969, BS 4275-1974 or equivalent pressure respirator with organic vapor cartridges
(Reference the Respiratory Protection requires half-face negative pressure respirator with
Program under the HSE Control Systems) cartridges
Any hot work on surfaces with lead paint requires air-
supplied full or half-face respirator
Nuisance dust areas requires disposable dust, mark
respirator
1 of 2
Within 10 feet of hand grinding, chipping, and Will be issued as required.
ANZI S1.4, S1.25 or equivalent. plasma-arc cutting Ear plugs will be issued for three
Hearing Protection:
See requirements for use Within engine Rooms months period.
Ear Muffs, Ear Plugs
Designated high noise areas as defined by the Ear muffs will provided on each
Hearing Conservation Program workshop and emergency vehicles.
Impervious gloves worn when working with chemicals
or providing first aid
Leather gloves with gauntlets worn when welding,
Hand Protection: cutting, fitting, brazing sharp edges Will be issued as required.
ANZI S1.4, S1.25 or equivalent
Cotton, rubber and canvas gloves Leather hand gloves worn when handling cables or
splicing of wire rope
Must not be worn when working with rotating
equipment
2 of 2