Professional Documents
Culture Documents
handling/preparations)
Assembly operations where a
high level of manual dexterity is
Tight-fitting, fingerless Only to be used where potential injury
8 required (e.g. , mechanical and Hand injury Hands
gloves to fingers is very minimal.
finishing trades, electrical and
instrumentation assembly).
Handing heat/cold materials Aluminized fabric or other For firefighting gloves, refer
(e.g., firefighting,chemicals, Exposure to special insulated materials to NFPA 1971-2000 or
9 Hands
laboratory works, process extrme heat/cold gloves or gauntlets (long equivalents (e.g. CE/EN443-
sampling) gloves) 1997)
Exposure to
hazardous
chemical such as Rubber, PVC, vinyl, nitrile, Always refer to MSDS prior to
caustic, acids, neoprene or other special selecting the appropriate chemical
10 Chemical handling
corrosive, materials gauntlets (long resistant gloves for the chemical being
cleansers/solven gloves) handled.
t, and petroleum
products
Electrical insulated gloves,
Electrical shock made up of rubber and
11 High-voltage electricity ASTM D 120-87
and burns worn undernearth leather
gloves
Particulate respirator shall not be used
for rescue, emergency work, or in any
Dust, dirt, solid ANSI Z88.2 and NIOSH 42 atmosphere containing gases/vapors that
Respiratory system Particulate respirator/mask
particles CFR 84 or DIN 3179 could be IDLH-use APR or
SCBA/SABA instead (see no.18 and
19)
Welding respirator shall not be used for
Working in environment with rescue, emergency work,or in any
12
airborne contaminant atmosphere containing gases/vapors that
could be Immediately Dangerous to
ANSI Z88.2 AND NIOSH Life and Health (IDLH)- use APR or
Welding fume Respiratory system Welding respirator/mask
42 CFR 84 or DIN 3179 SCBA/SABA instead (see no.18 and
19)
No SKT-HSE/FOR/12-24
PT. SKOTFIRE & SAFETY TECHNOLOGY
Rev 02
Tgl
STANDART INTERNAL APD Hal 3 dari 4