Professional Documents
Culture Documents
Microcontroller
Edition 2016-06-16
Published by
Infineon Technologies AG
81726 Munich, Germany
© 2016 Infineon Technologies AG
All Rights Reserved.
Legal Disclaimer
The information given in this document shall in no event be regarded as a guarantee of conditions or
characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any
information regarding the application of the device, Infineon Technologies hereby disclaims any and all
warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual
property rights of any third party.
Information
For further information on technology, delivery terms and conditions and prices, please contact the nearest
Infineon Technologies Office (www.infineon.com).
Warnings
Due to technical requirements, components may contain dangerous substances. For information on the types in
question, please contact the nearest Infineon Technologies Office.
Infineon Technologies components may be used in life-support devices or systems only with the express written
approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the
failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life
support devices or systems are intended to be implanted in the human body or to support and/or maintain and
sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other
persons may be endangered.
XMC4700/XMC4800 Relax Kit Series-V1
Revision History
Page or Item Subjects (major changes since previous revision)
Revision 1.0, Initial Version
2015-11-20
Revision 1.1, Figure 7 has been updated: X2.16 has been changed from P6.1 to P6.4; X2.15 has been
2016-02-11 changed from P5.3 to P6.3; X1.14 has been changed from P3.9 to P3.0
Revision 1.2 EtherCAT® added to “Other Trademarks”
2016-06-15
Other Trademarks
Advance Design System™ (ADS) of Agilent Technologies, AMBA™, ARM™, MULTI-ICE™, KEIL™,
PRIMECELL™, REALVIEW™, THUMB™, µVision™ of ARM Limited, UK. AUTOSAR™ is licensed by
AUTOSAR development partnership. Bluetooth™ of Bluetooth SIG Inc. CAT-iq™ of DECT Forum.
COLOSSUS™, FirstGPS™ of Trimble Navigation Ltd. EMV™ of EMVCo, LLC (Visa Holdings Inc.). EPCOS™
of Epcos AG. FLEXGO™ of Microsoft Corporation. FlexRay™ is licensed by FlexRay Consortium.
HYPERTERMINAL™ of Hilgraeve Incorporated. IEC™ of Commission Electrotechnique Internationale. IrDA™
of Infrared Data Association Corporation. ISO™ of INTERNATIONAL ORGANIZATION FOR
STANDARDIZATION. MATLAB™ of MathWorks, Inc. MAXIM™ of Maxim Integrated Products, Inc.
MICROTEC™, NUCLEUS™ of Mentor Graphics Corporation. Mifare™ of NXP. MIPI™ of MIPI Alliance, Inc.
MIPS™ of MIPS Technologies, Inc., USA. muRata™ of MURATA MANUFACTURING CO., MICROWAVE
OFFICE™ (MWO) of Applied Wave Research Inc., OmniVision™ of OmniVision Technologies, Inc.
Openwave™ Openwave Systems Inc. RED HAT™ Red Hat, Inc. RFMD™ RF Micro Devices, Inc. SIRIUS™ of
Sirius Satellite Radio Inc. SOLARIS™ of Sun Microsystems, Inc. SPANSION™ of Spansion LLC Ltd.
Symbian™ of Symbian Software Limited. TAIYO YUDEN™ of Taiyo Yuden Co. TEAKLITE™ of CEVA, Inc.
TEKTRONIX™ of Tektronix Inc. TOKO™ of TOKO KABUSHIKI KAISHA TA. UNIX™ of X/Open Company
Limited. VERILOG™, PALLADIUM™ of Cadence Design Systems, Inc. VLYNQ™ of Texas Instruments
Incorporated. VXWORKS™, WIND RIVER™ of WIND RIVER SYSTEMS, INC. ZETEX™ of Diodes Zetex
Limited.
Last Trademarks Update 2011-02-24
EtherCAT® is registered trademark and patented technology, licensed by Beckhoff Automation GmbH,
Germany.
Template: IFX_Template_2011-02-24.dot
XMC4700/XMC4800 Relax Kit Series-V1
Table of Contents
Table of Contents
1 Introduction ........................................................................................................................................5
1.1 Key Features ........................................................................................................................................6
1.2 Block Diagram ......................................................................................................................................7
2 Hardware Description ........................................................................................................................7
2.1 Power Supply .....................................................................................................................................10
2.2 Pin Header X1 and X2 .......................................................................................................................11
2.3 Arduino Compatible Connector ..........................................................................................................12
2.4 User Push Buttons and User LEDs....................................................................................................13
2.5 Debugging and UART-to-USB Communiction ...................................................................................13
2.5.1 On-board Debug Probe ......................................................................................................................13
2.5.2 Cortex™ Debug Connector (10-pin) ..................................................................................................13
2.6 Reset ..................................................................................................................................................14
2.7 CAN Transceiver ................................................................................................................................14
2.8 Serial Flash Memory ..........................................................................................................................14
2.9 microSD Card.....................................................................................................................................15
2.10 Ethernet..............................................................................................................................................15
2.11 Boot Option ........................................................................................................................................15
3 Production Data................................................................................................................................16
3.1 Schematics.........................................................................................................................................16
3.2 Components Placement and Geometry.............................................................................................22
3.3 List of Material ....................................................................................................................................23
List of Figures
Figure 1 Block Diagram of the XMC4700/XMC4800 Relax Kit Series-V1 .........................................................7
Figure 2 XMC4700 Relax Lite Kit .......................................................................................................................8
Figure 3 XMC4700 Relax Kit for 5V Shields ......................................................................................................8
Figure 4 XMC4700 Relax Kit ..............................................................................................................................9
Figure 5 The XMC4800 Relax EtherCAT Kit includes the XMC EtherCAT PHY Board ....................................9
Figure 6 Power Supply Concept.......................................................................................................................10
Figure 7 Signal mapping of the pin headers X1 and X2...................................................................................11
Figure 8 Mapping of Arduino Functions to XMC Pin Functions .......................................................................12
Figure 9 Relax Kit Schematic: MCU, Push Buttons, LEDs, Reset Button, Crystals, USB ...............................17
Figure 10 Relax Kit Schematic: OBD Probe, Ethernet, Quad-SPI Memory, microSD Card Slot.......................18
Figure 11 Relax Kit Schematic: Pin Header, Voltage Level Shifter, Power Supply, CAN transceiver...............19
Figure 12 XMC EtherCAT Phy Board Schematic: Input and Output Phy ..........................................................20
Figure 13 XMC EtherCAT Phy Board Schematic: Power, Connectors, LEDs ...................................................21
Figure 14 Components Placement and Geometry.............................................................................................22
List of Tables
Table 1 Kit Specification....................................................................................................................................5
Table 2 Kit Features of Assembly Versions ......................................................................................................6
Table 3 XMC4700/XMC4800 Pin Mapping for User LEDs .............................................................................13
Table 4 XMC4700/XMC4800 Pin Mapping for User Push Buttons.................................................................13
Table 5 XMC4700/XMC4800 Pins Mapping for Debugging and UART-Communication ...............................13
Table 6 Pin Assignment of the Cortex™ Debug Connector (X102)................................................................13
Table 7 CAN Signals and XMC4700/XMC4800 Pin Mapping.........................................................................14
Table 8 XMC4700/XMC4800 Pins Mapping for Serial Flash Memory............................................................14
Table 9 XMC4700/XMC4800 Pins Mapping for microSD Card ......................................................................15
Table 10 XMC4700/XMC4800 Pins used for Ethernet .....................................................................................15
Table 11 Boot Mode Selection with external Pull Resistors..............................................................................15
Table 12 List of Material ....................................................................................................................................23
Introduction
1 Introduction
This document describes the features and hardware details of the XMC4700/XMC4800 Relax Kit Series-V1
® ®
equipped with an ARM Cortex -M4 based XMC™ Microcontroller from Infineon Technologies AG.
It can be used with a wide range of development tools including Infineon’s free of charge Eclipse based IDE
DAVE. The XMC4700/XMC4800 Relax Kit Series-V1 are designed to evaluate the capabilities of the
XMC4700 / XMC4800 Microcontroller. Table 1 shows its specification.
The XMC4700/XMC4800 Relax Kit Series-V1 are available in four different assembly versions differentiating in
features:
• XMC4700 Relax Lite
• XMC4700 Relax for 5V Shields
• XMC4700 Relax
• XMC4800 Relax EtherCAT
®
The XMC4700 Relax Kit and the XMC4800 Relax EtherCAT Kit feature with an Ethernet-enabled
communication option, e.g. to run an embedded web server. You can store your own HTML web pages on a
microSD Card or control the XMC4700 / XMC4800 via the web browser on your PC.
Additional voltage level shifters and Aruino connection header on theXMC4700 Relax Kit for 5V Shields allow
the usage of Arduino shields with 3.3V or 5V logic level.
Introduction
The embedded web server application is not supported by the KXMC4700 Relax Lite Kit and the
XMC4700 Relax Kit for 5V Shields, because some components e.g. for Ethernet and SD-Card are not
assembled.
®
The XMC4800 Relax EtherCAT Kit is assembled with a XMC4800 (pin compatible to XMC4700) and comes
®
together with a top-mounted XMC EtherCAT Phy Board. It’s a complete development kit for EtherCAT slave
devices and the XMC4800 is powerful and functional enough to make this board an ideal choice for the
®
development engineers of EtherCAT slaves such as servo drives and intelligent I/O devices.
All boards are marked with “XMC4700/XMC4800 Relax Kit Series-V1” and can be distinguished by the
assembled devices (see pictures in chapter 2). These boards are neither cost nor size optimized and do not
serve as a reference design.
Hardware Description
P15.13 P5.9
BUTTON1 LED1 CAN
Trans. Pin Header Arduino™ (ANALOG IN)
BUTTON2 LED1 RESET
P15.12 P5.8 Pin Header X2
2x20, 0.1"
2 Hardware Description
The following chapters give a detailed description of the board hardware and how it can be used. The different
assembly versions of the kits series are shown in Figure 2, Figure 3, Figure 4 and Figure 5.
Hardware Description
Hardware Description
Figure 5 The XMC4800 Relax EtherCAT Kit includes the XMC EtherCAT PHY Board
Hardware Description
Hardware Description
Hardware Description
(Top View)
P0.13 /
10 P14.5
I2C_SCL / U1C1.SCLKOUT ADC5 / VADC.G0CH0
P3.15 /
9 P14.4
I2C_SDA: U1C1.DOUT0 ADC4: VADC.G0CH1
7 GND
GND 7
P14.4 /
I2C_SCL / U1C1.DOUT0 ADC4: VADC.G2CH0
P3.15
5 2 P2.14 UART_TXD: U1C0.DOUT0
P14.5 /
I2C_SCL / U1C1.SCLKOUT ADC5 / VADC.G2CH1 P0.13 6 5 3 1 1 P2.15 UART_RXD: U1C0.DX0C
6 4 2
GND 5V
Hardware Description
Hardware Description
2.6 Reset
The reset pin (PORST#) of the XMC4700/XMC4800 is a bi-directional pin in open drain mode. An internal pull-
up resistor keeps the PORST# pin high during normal operation. A low level at this pin will force a hardware
reset. In case of a MCU internal reset the PORST# pin will drive a low signal.
A reset signal can be issued by
• the on-board Reset Button (SW102, “RESET”)
• the on-board debug probe (IC101.46)
• the external debugger connected to the 10-pin Cortex™ Debug probe connector (X102)
• the Arduino Power Header (X302.3, “RESET”)
• the pin header X2 (X2.32, “RST#”)
An XMC™ internal circuit always ensures a save Power-on-Reset. XMC™ does not require any additional
external components to generate a reset signal during power-up.
Hardware Description
2.10 Ethernet
The XMC4700 Relax Kit and the XMC4800 Relax EtherCAT Kit provide an Ethernet Phy and RJ45 plug.
Production Data
3 Production Data
This chapter covers schematics, board dimensions, component placement and the list of material.
3.1 Schematics
In the following figures shows the schematics of the XMC4700/XMC4800 Relax Kit Series-V1 and the XMC
EtherCAT Phy Board-V1:
• Figure 9: Relax Kit Schematic: MCU, Push Buttons, LEDs, Reset Button, Crystals, USB
• Figure 10: Relax Kit Schematic: OBD Probe, Ethernet, Quad-SPI Memory, microSD Card Slot
• Figure 11: Relax Kit Schematic: Pin Header, Voltage Level Shifter, Power Supply, CAN transceiver
• Figure 12: XMC EtherCAT Phy Board Schematic: Input and Output Phy
• Figure 13: XMC EtherCAT Phy Board Schematic: Power, Connectors, LEDs
Figure 9
XMC4700 / XMC4800 Relax Kit Series-V1 IC100
ECAT_LED_8 P0.15 135 P3.15 133 P3.15 SDA, ADC_4
136 P0.15 134
Target Device ECAT_LED_7 P0.14 P3.14 P3.14 ECAT_LED_6
137 P0.14 8
SCL, ADC_5 P0.13 P3.13 P3.13 ECAT_LED_1
138 P0.13 9
ECAT0.MDO P0.12 P3.12 P3.12 ECAT0.P1_LINK_ACT
139 P0.12 10
ECAT0.P1_RXD0A P0.11 P3.11 P3.11 ECAT_LED_5
3 P0.11 11
ECAT0.P1_TX_CLKA P0.10 P3.10 P3.10 SPI_CS, PWM_4
4 P0.10 12
A ECAT0.P1_RX_DVA P0.9 P3.9 P3.9 SPI_CLK A
127 P0.9 13
ECAT0_LED_RUN P0.8 P3.8 P3.8 SPI_MOSI, PWM_5
128 P0.8 14
ECAT0_LED_ERR P0.7 P3.7 P3.7 SPI_MISO ADJ_1 ADJ_2 ADJ_3
140 P0.7 129
ECAT0.P1_RXD1A P0.6 MMC_CLK
VDD3.3
ECAT_LED_3 P1.14 102 60 P2.14 UART_TX
P1.14 P2.14 BUTTON 1
CAN_RX 103 P2.13 63 P2.13 SW100
104 P1.13 64
CAN_TX P2.12 P2.12 PWM_2 TMPS2-SMD
P1.12
LED100
LED-RT/D/0603
PWM_3 P1.11 105 65 P2.11 PWM_1
P2.11
R114
10k
106 P1.11 66 P S
IO_2 P1.10 P2.10 P2.10 BUTTON1
113 P1.10 67 C118 P1 S1
IO_1 P1.9 P2.9 ETH_TXD1
114 P1.9 68
IO_0 P1.8 Digital P2.8 ETH_TXD0
115 P1.8 75 100nF
MMC_DAT2 P2.7 ETH_MDC
R112
680R
P1.7
LED1
2mA LED
B MMC_DAT1 116 P2.6 76 P2.6 ECAT0.P0_RX_ERRB B
107 P1.6 69
P1.5 P2.5 ETH_TXEN
108 P1.5 70
P1.4 P2.4 ETH_RXER GND GND GND
109 P1.4 71
ETH_Interrupt P1.3 P2.3 ETH_RXD1
110 P1.3 72
ECAT_LED_4 P1.2 P2.2 ETH_RXD0
111 P1.2 73
INT_1, PWM_0 P1.1 P2.1 SWV LED2
P1.1
VDD3.3
119 P4.6 57 P S
QSPI_IO2 P5.9 LED1 BUTTON2
120 P4.5 58 C119 P1 S1
QSPI_IO3 P5.8 LED2
121 P4.4 77
QSPI_CS P5.7 P5.7 ECAT0.P0_RXD3B
122 P4.3 78 100nF
QSPI_CLK P5.6 P5.6 ECAT0.P0_RX_DVB
R113
680R
P4.2
LED2
2mA LED
17
ECAT0.P0_TXD0 P6.2 P15.15 P15.15
100 P6.2 44
ECAT0.P0_TX_ENA P6.1 P15.14 P15.14
VDD3.3
101 P6.1 49
ECAT0.PHY_CLK P6.0 P15.13 BUTTON1
P6.0
VDD3.3
P15.12 50 BUTTON2
VAREF
P14.15 31 53 ETH_CRS
P14.15 P15.9
P14.14 32 54 ETH_CLK
L102
P14.14 P15.8 SW102
P14.13 33 25 P15.7 TMPS2-SMD
P15.7
R116
10K/0402
34 P14.13 26
P14.12 P15.6 P15.6
P14.12
0R L101
P14.9 51 P15.5 27 P15.5 RESET# P S
52 P14.9 28 P1 S1
P14.8 P15.4 BLM18PG600
BLM18PG600
P14.8 P15.4
R109
P14.7 35 Analog P15.3 29 P15.3
P14.7
no ass./0R
P14.6 36 30 P15.2 ECAT0.P1_RX_ERRB
P14.6 P15.2
ADC_3 P14.5 37 C120
P14.5
R110
VDD5
BAS3010A-03W 24 HIB_IO_0 22
L100 BLM18PG600 RTC_XTAL_1 RTC_XTAL_1 GND RTC Crystal
A C VBAT
1
USB_DM 15
2 USB_D-
3 USB_DP 16 USB XTAL2 88 R111 510R/0402 Q100
17 USB_D+
4 R107 22R 12MHZ/S/3.2X2.5 RTC_XTAL_1
VBUS 87
5 R108 22R XTAL1 Q400
ZX62-AB-5PA
126
2
32.768KHZ
86 VDDP3
RTC_XTAL_2
VDDP2
VDD3.3
62 PORST# 91 RESET#
VDDP1
D100 1
100nF
18 Supply 93 TCK
TCK
D2
VDDP 92 TMS
TMS
1M
3 D1
15pF
15pF
125
R106
90 VDDC3 89
C100
VDDC2 VSSO
61 85
C400 15pF
C401 15pF
VDDC1 VSS
EXP
ESD8V0L2B-03L
GND GND GND GND VDDC 19
C116
C117
VDDC EPAD
10uF/10V
10uF/10V
10uF/10V
10uF/10V
100nF
100nF
100nF
100nF
XMC4700/XMC4800_LQFP144 GND GND
GND GND GND GND
E E
100nF
100nF
100nF
100nF
10uF/10V
V1 / 01.09.2015
C101
C102
C103
C104
C105
C106
C107
C108
Relax Kit Schematic: MCU, Push Buttons, LEDs, Reset Button, Crystals, USB
Legal Disclaimer XMC4700 Relax Kit Series
C109
C110
C111
C112
C113
The information given in this document shall in no event be regarded as a guarantee of conditions or
characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any
XMC4700_Relax-V1
GND
information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties
and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights
14.09.2015 14:34:39
of any third party.
GND Sheet: 1/3
1 2 3 4 5 6 7 8
Production Data
Figure 10
On-board Debugger Ethernet
VDD3.3
VDD3.3
VDD3.3
2
IC101
D400 VDD3.3
21 42
1
P2.5 BAT64-02V
R402
1k
R403
10k
P0.8
BAT64-02V
TCK 22 43 1 2 RESET#
P2.4
R123
R124
P0.7 R122
120R
120R
C402
A CS 23 P2.3 44 A
24 P0.6 45
510R/0402 R401
SWV SWV P2.2 P1.4 PC_TXD P1.3 D401
25 P0.5 46
P2.1 P1.5 PC_RXD no ass./0R
P0.4
22uF/10V
26 47
C403
100nF
P2.0 P0.3
10uF/10V
C404
48 DEBUG_LED
L400
BLM18PG600
1k R400
R404
R405
P0.2 1 14 24
COM_LED GND GND VDDIO GND
P0.1 2 1 RST#
SWV SWV VDD_1.2
P0.0 2 VDDA_3.3
Digital 35 TMS TMS
P1.5 36 16 X400
ETH_CLK REF_CLK
P1.4 37 19 23 1 9
ETH_TXEN TXEN TD+
P1.3 38 20 LED0 3 LA 10
ETH_TXD0 TXD0
P1.2 39 21 RXM 4 4 LC
TCK TCK ETH_TXD1 TXD1 CTT
P1.1 40 15 RXP 5 12
CS ETH_CRS CRS_DV
P1.0 13 TXM 6 2 RA 11
ETH_RXD0 RXD0 TD-
19 12 TXP RC
ETH_RXD1 RXD1
P14.9 20 17
ETH_RXER RXER
P14.8 11 18 3
Level Shifter RD+
P14.7 12 11 INTRP
Analog No RESET Pin ETH_MDC MDC
P14.6 13 10 5
UART ETH_MDIO MDIO CTR
P14.5 RJ45
VDD3.3
B 14 SPD 9 B
P14.4 REXT
VDD3.3
VDD5
18 15 SWV 6
VAREF P14.3 RD-
17 16 JTAG 7
VAGND P14.0 XO
22 7 S1
C
GND NC S1
9 GND 8 EXP 8 S2
RTC_XTAL_2 XI P_GND CG S2
D103
BAS3010A-03W
Hibernate/RTC 7 X101
A
8 HIB_IO_0 10
L103
RTC_XTAL_1 BLM18PG600 KSZ8081RNA Würth 7499010211A
VBAT
100nF
100nF
1
3 R120 22R/0402
Q101 2
R118 510R/0402 30 USB USB_D- 4 R121 22R/0402
XTAL2 3
R406
6K49/0603
USB_D+ L401
12MHZ/S/3.2X2.5 4
25MHz/50ppm
Q401
BLM18PG600
100nF
22pF
22pF
C405
C407
29
XTAL1 5
C411
C412
ZX62-AB-5PA
41
1
2D102
R126
VDDP2
22uF/10V
DBGPRES# 32 28
2.2uF/10V
C406 100nF
C408
C409
C410
PORST# VDDP1
4k7/0402
WTCK 34 Supply 5 P2.10
TCK VDDP
WTMS 33 TMS GNDGND GNDGND GND GND GND
D2
C121 15pF
C122 15pF
3 D1
ESD8V0L2B-03L
27 31
R127
VSS
R125
1M
VDDC1
VDD3.3
VDD3.3
C EPAD 6 C
C131 100nF
EPAD VDDC
10k/0402
18
GND GND qSPI Flash
XMC4200_QFN48
R119
10k
VDD3.3
VDD3.3
3 GND
C123 100nF
C124 100nF
C125 4.7uF/10V
C126 10uF/10V
C127 10uF/10V
C128 100nF
C129 100nF
C130 100nF
4 QSPI_IO3 7 HOLD# 3 QSPI_IO2
WP#
5 TH-Pads
2.54mm pitch
5 (IO3) (IO2)
no ass. QSPI_CS 1
CS#
GND GND GND GND QSPI_CLK 6 CLK
QSPI_IO0 5
DI (IO0)
QSPI_IO1 2
DO (IO1)
C413 N25Q032A
On-board Debugger Concept Cortex Debug 100nF
D GND GND D
SPI Master U0C0
MISO DX0B-P1.4 Micro SD-Card
TMS MOSI DOUT0-P1.5
VDD3.3
VDD3.3
CS_IN DX2A-P2.3 1 2 TMS
R410 10k
R411 10k
R412 10k
R413 10k
R414 10k
Relax Kit Schematic: OBD Probe, Ethernet, Quad-SPI Memory, microSD Card Slot
and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights
13.11.2015 18:36:31
of any third party.
Sheet: 2/3
1 2 3 4 5 6 7 8
/ / m uc s dn3 1 . e u. i nf i ne on. c om / Ro e m m e l m / M y doc um e n t s / Bo o t l o a d e r _ Re m a ppi ng/ qr c ode . bm p
Production Data
Figure 11
Pinheader
A A
X304
GND
GND
38 37 7 GND GND 38 37
GND
GND
36 35 NC 1 6 P3.9* SPI_CLK 36 35 CANL
VDD3.3 34 33
VDD5 2 34 33
CAN.N5_TXD P5.11 P5.10 CAN.N5_RXDA IOREF IOREF 5 P3.7* SPI_MISO CANH
P1.14 32 31 P2.13 RESET RESET# 3 4 P3.8* SPI_MOSI, PWM_5 VDD3.3 RESET# 32 31
VDD5
DAC.OUT_0 P14.8 30 29 P14.9 DAC.OUT_1 3V3 4 3 P3.10* SPI_CS, PWM_4 HIB_IO_1 30 29 HIB_IO_0
P15.14 28 27 P15.15 5V VDD3.3 5 2 P1.11* PWM_3 ECAT0.P0_RX_ERRB P2.6 28 27 P5.7 ECAT0.P0_RXD3B
P14.6 26 25 P14.7 GND 6 1 P1.10* IO_2 ECAT0.P0_RX_DVB P5.6 26 25 P5.5 ECAT0.P0_TX_CLKB
P14.12 24 23 P14.13 GND 7 ECAT0.P0_RX_CLKB P5.4 24 23 P5.3
GND
P14.14 22 21 P14.15 NC VDD5 8 ECAT0.P0_RXD2 P5.2 22 21 P5.1 ECAT0.P0_RXD1
5
3
1 P3.9*
B ECAT0.P1_RX_DVA P0.9 P3.2 ECAT0.P1_TXD1 ADC_0 P14.0 P2.12* PWM_1 ECAT0.PHY_CLK P6.0 P1.2 B
ECAT0.PHY_RST P0.0 10 9 P0.10 ECAT0.P1_TX_CLKA ADC_1 P14.1 2 5 P1.8* IO_0 ECAT0_LED_RUN P0.8 10 9 P0.7 ECAT0_LED_ERR
ECAT0.P1_TXD2 P0.2 8 7 P0.1 ECAT0.P1_RX_CLKA ADC_2 P14.2 3 4 P1.1* INT_1, PWM_0 ECAT0.MCLK P3.3 8 7 P3.14
X300
ECAT0.P1_RXD3A P0.4 6 5 P0.3 ECAT0.P1_TXD3 ADC_3 P14.3 4 3 P1.0* INT_0 P0.15 6 5 P0.14
ECAT0.P1_RXD1A P0.6 4 3 P0.5 ECAT0.P1_RXD2A SDA, ADC_4 P14.4 P3.15* 5 2 P2.14* UART_TX ECAT0.MDO P0.12 4 3 P3.11
6
4
ECAT0.P1_RXD0A P0.11 2 1 P3.4 ECAT0.P1_LINKA SCL, ADC_5 P14.5 P0.13* 6 VDD5 1 P2.15* UART_RX P3.12 2 1 P3.13
P3.8* 2
GND
X301
All resistors 100R
R100-R105
C C
IC300
19
RA200
SCL, ADC_5 P0.13* 20 B1 1 P0.13 SCL, ADC_5
18 A1 3 IC402
SDA, ADC_4 P3.15* B2 P3.15 SDA, ADC_4
17 A2 4 8 9 1 8
SPI_CLK P3.9* B3 P3.9 SPI_CLK SCL, ADC_5 P0.13* P0.13 SCL, ADC_5 CAN_TX TXD
A3 RM
GND
SPI_MISO P3.7* 16 B4 5 P3.7 SPI_MISO SDA, ADC_4 P3.15* 7 10 P3.15 SDA, ADC_4 2*2 GND 7 CANH
A4 CANH
VDD3.3
SPI_MOSI, PWM_5 P3.8* 15 6 P3.8 SPI_MOSI, PWM_5 SPI_CLK P3.9* 6 11 P3.9 SPI_CLK 3 6 CANL
GND
B5 A5 VCC CANL
SPI_CS, PWM_4 P3.10* 14 B6 7 P3.10 SPI_CS, PWM_4 SPI_MISO P3.7* 5 12 P3.7 SPI_MISO CAN_RX 4 RXD 5
13 A6 8 4 13 V33
PWM_3 P1.11* B7 P1.11 PWM_3 SPI_MOSI, PWM_5 P3.8* P3.8 SPI_MOSI, PWM_5 VDD5
12 A7 9 3 14
IO_2 P1.10* B8 P1.10 IO_2 SPI_CS, PWM_4 P3.10* P3.10 SPI_CS, PWM_4 IFX1051LE VDD3.3
R300
10k
A8 2 15
PWM_3 P1.11* P1.11 PWM_3
IOREF 19 VCCB 10 IO_2 P1.10* 1 16 P1.10 IO_2
2 OE 11
VCCA GND
VDD3.3
TXS0108EPW GND 0R Array
R301
no ass./0R
Power Target Device
C300 100nF
C301 100nF
GND
D GNDGND D
IC102
VDD5
VDD3.3
A4
VDD3.3
INT_1, PWM_0 P1.1* 15 6 P1.1 INT_1, PWM_0 PWM_1 P2.12* 6 11 P2.12 PWM_1
B5 A5
INT_0 P1.0* 14 7 P1.0 INT_0 IO_0 P1.8* 5 12 P1.8 IO_0
1
B6 A6
UART_TX P2.14* 13 B7 8 P2.14 UART_TX INT_1, PWM_0 P1.1* 4 13 P1.1 INT_1, PWM_0
12 A7 9 3 14
UART_RX P2.15* B8 P2.15 UART_RX INT_0 P1.0* P1.0 INT_0
R302
10k
A8
LED104 680R/0603
LED-GN/D/0603
R303
no ass./0R
GND GND GND GND
C302 100nF
C303 100nF
E GND E
GNDGND 3 VDD5 V1 / 01.09.2015
2 IOREF
1 VDD3.3 Legal Disclaimer XMC4700 Relax Kit Series
The information given in this document shall in no event be regarded as a guarantee of conditions or
JP300 C304 XMC4700_Relax-V1
characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any
100nF information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties
and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights
14.09.2015 14:34:39
of any third party.
GND Sheet: 3/3
1 2 3 4 5 6 7 8
Relax Kit Schematic: Pin Header, Voltage Level Shifter, Power Supply, CAN transceiver
Production Data
Figure 12
R108 VDD3.3
P1.15
ECAT0.P0_LINKB 270R/0603 V100
ECAT Port0 IN LED-GE/D/0603
L100 LED-GN/D/0603
R109 V101
P6.3
A VDD3.3 C101 BLM18PG600 C102 A
U100 270R/0603
VDD3.3
6 ECAT0.P0_LINK_ACT
S R104 L101
100nF/0402 100nF/0402
VDD3.3
P6.2 25 22 6 11 8
TXD0 OVDD 49R9/0603 8
P6.1 24 7
4*49R9 TXEN AVDD
P5.4 R101 49R9/0603 20
RXC
32 7 10 S1
S1
RA101A 15 DVDD S2
P5.7 RXD3 S2
P5.2 16 8 8 9
RXD2 RDAC R107
VDD1.8
P5.1 17 31 43860-0010
RXD1 GNDOUT 49R9/0603
P5.0 18 EXP PT61017PEL
RXD0 EXP
B P5.6 19 B
C103
100nF/0402
C104
100nF/0402
C105
10uF/10V/0805
C106
100nF/0402
C107
100nF/0402
C108
10uF/10V/0805
4*49R9 RXDV
P2.6 21
RXER
R110
75R/0603
R111
75R/0603
R112
75R/0603
R113
75R/0603
R102
2k2/0603 VDD3.3
30 11
CRS
R103
1k24/0603
29 LED2 12
COL LED1
P1.15
ECAT0.MDO P0.12 13 ECAT0.P0_LINKB
MDIO
C109
C110
C111
C112
ECAT0.MCLK P3.3 14 10 ECAT_PHY_RST C113
MDC RESET
BCM5241XA1KMLG ECAT0.PHY_RST 1000pF/2kV/1206
100nF/0402
100nF/0402
100nF/0402
100nF/0402
C114
GNDGND GND GND GND GND GND GND GND GND GNDGND
1000pF/2kV/1206
CHASSIS_GND
GND
20
LED-GE/D/0603
VDD3.3 C151 BLM18PG600 C152 LED-GN/D/0603
U150 R159 V151
VDD3.3
6 P3.12
S R154 L151
100nF/0402 100nF/0402 49R9/0603 ECAT0.P1_LINK_ACT
270R/0603
3 4 1 16
I0
P6.0 1 MUX Z
I1 U151 GND GND 2 15 GND
5 2 PHY1_CLK_1_8V 1 3 X150
VCC GND XTALI TD+ R155
2 4 3 14 1
XTALO TD- 49R9/0603 1
VDD1.8 C150
NC7SZ157P6X GND 6 2
RD+ 2
P0.10 R150 49R9/0603 23 5 3
RA150A TXC RD- 3
100nF/0402 P0.3 28 4
TXD3 4
P0.2 27 5
TXD2 5
GND P3.2 26 9 6
TXD1 OVDD R156 6
VDD3.3
P3.1 25 22 6 11 7
TXD0 OVDD 49R9/0603 7
P3.0 24 7 8
4*49R9 TXEN AVDD 8
P0.1 R151 49R9/0603 20 32 7 10
RA151A RXC DVDD
P0.4 15 S1
D RXD3 S1 D
P0.5 16 8 8 9 S2
RXD2 RDAC R157 S2
VDD1.8
P0.6 17 31
RXD1 GNDOUT 49R9/0603
P0.11 IC1_RXD0_PHYAD0 18 EXP PT61017PEL 43860-0010
RXD0 EXP
19
C153
100nF/0402
C154
100nF/0402
C155
10uF/10V/0805
C156
100nF/0402
C157
100nF/0402
C158
10uF/10V/0805
RXER R152
R160
75R/0603
R161
75R/0603
R162
75R/0603
R163
75R/0603
30 11
2k2/0603 VDD3.3
CRS LED2
29 12 P3.4
COL
R153
1k24/0603
13 LED1 C163
ECAT0.MDO P0.12 MDIO ECAT0.P1_LINKA
C159
C160
C161
C162
GNDGND GND GND GND GND GND GND GND GND GNDGND
1000pF/2kV/1206
CHASSIS_GND
GND
E E
Legal Disclaimer
The information given in this document shall in no event be regarded as a guarantee of conditions or
characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any
XMC_ECAT_PB-V1
information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties
and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights
03.08.2015 16:51:38
of any third party.
Sheet: 1/2
/ / m uc s dn3 1 . e u. i nf i ne on. c om / Ro e m m e l m / M y doc um e n t s / Bo o t l o a d e r _ Re m a ppi ng/ qr c ode . bm p
1 2 3 4 5 6 7 8
/ / m uc s dn3 1 . e u. i nf i ne on. c om / Ro e m m e l m / M y doc um e n t s / Bo o t l o a d e r _ Re m a ppi ng/ qr c ode . bm p
Production Data
Figure 13
Power 1,8V Pin header Relax Kit
U200
VDD1.8
VDD5
VDD3.3
9*2 1*2
IN OUT
A A
7 4
EN
R202
1k5/0603
SENSE/ADJ
V200
LED-GN/D/0603
T200
IFX54441LDV 10nF/0402 BCR108W
C201
X1 X2
C200
R201
10k/0603
40 39 40 39
C202
GND
GND
VDD3.3RK 38 37 VDD3.3RK 38 37
GND
GND
10uF/10V/0805
36 35 36 35
10uF/10V/0805
34 33
VDD5 34 33
GND GND GND GND GND P1.14 32 31 32 31
VDD5
30 29 30 29
28 27 ECAT0.P0_RX_ERRB P2.6 28 27 P5.7 ECAT0.P0_RXD3B
26 25 ECAT0.P0_RX_DVB P5.6 26 25 P5.5 ECAT0.P0_TX_CLKB
24 23 ECAT0.P0_RX_CLKB P5.4 24 23 P5.3
22 21 ECAT0.P0_RXD2 P5.2 22 21 P5.1 ECAT0.P0_RXD1
B ECAT0.P1_RX_ERRB P15.2 20 19 ECAT0.P0_RXD0 P5.0 20 19 P1.15 ECAT0.P0_LINKB B
18 17 ECAT0.P0_TXD3 P6.6 18 17 P6.5 ECAT0.P0_TXD2
Power 3,3V 16 15 ECAT0.P0_TXD1 P6.4 16 15 P6.3 ECAT0.P0_LINK_ACT
ECAT0.P1_TX_ENA P3.0 14 13 P3.1 ECAT0.P1_TXD0 ECAT0.P0_TXD0 P6.2 14 13 P6.1 ECAT0.P0_TX_ENA
ECAT0.P1_RX_DVA P0.9 12 11 P3.2 ECAT0.P1_TXD1 ECAT0.PHY_CLK P6.0 12 11 P1.2
ECAT0.PHY_RST P0.0 10 9 P0.10 ECAT0.P1_TX_CLKA ECAT0_LED_RUN P0.8 10 9 P0.7 ECAT0_LED_ERR
ECAT0.P1_TXD2 P0.2 8 7 P0.1 ECAT0.P1_RX_CLKA ECAT0.MCLK P3.3 8 7 P3.14
U210
VDD3.3RK
VDD3.3
ECAT0.P1_RXD3A P0.4 6 5 P0.3 ECAT0.P1_TXD3 P0.15 6 5 P0.14
VDD5
9*2 1*2 ECAT0.P1_RXD1A P0.6 4 3 P0.5 ECAT0.P1_RXD2A ECAT0.MDO P0.12 4 3 P3.11
IN OUT
ECAT0.P1_RXD0A P0.11 2 1 P3.4 ECAT0.P1_LINKA P3.12 2 1 P3.13
7 4
EN SENSE/ADJ
R213
B2*20 B2*20
R210
0R/0603
10k/0603
5
6 BYP EXP
GND
R212
680R/0603
EXP
IFX54441LDV33 10nF/0402
R214
C211
C210
R211
NA/0603
49k9/0603
V210
LED-GN/D/0603
C212
C C
10uF/10V/0805
21
10uF/10V/0805
GND GND GND GND GND GND
ECAT_PHY_RST 4 2 P0.0
5
VDD
U230G C230
1
VDD3.3
U230P
100nF/0402
R230
R231
D D
3
GND
10k/0603
10k/0603
GND
GND GND GND GND
LED1
LED2
LED3
LED4
LED5
LED6
LED7
LED8
V230
V231
V232
LED-RT/D/0603
V233
LED-RT/D/0603
V234
LED-RT/D/0603
V235
LED-RT/D/0603
V236
LED-RT/D/0603
V237
LED-RT/D/0603
V238
LED-RT/D/0603
V239
LED-RT/D/0603
TOPLED/GN
Phy Pull Resistors
R227
R223
R224
R222
R226
R229
R228
R225
Select PHY Adress for PHY 1
R220
R221
VDD3.3
680R/0603
680R/0603
680R/0603
680R/0603
680R/0603
680R/0603
680R/0603
680R/0603
680R/0603
680R/0603
R232
IC1_RXD0_PHYAD0
4k7/0603
P0.8
P0.7
P1.14
P0.14
P3.14
P0.15
P1.2
P3.13
P5.3
P3.11
R233 VDD3.3
ECAT0.MDO P0.12
E 1k5/0603 E
Legal Disclaimer
The information given in this document shall in no event be regarded as a guarantee of conditions or
XMC_ECAT_PB-V1
ECAT0_LED_ERR
ECAT0_LED_RUN
characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any
information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties
and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights
03.08.2015 16:51:38
of any third party.
Sheet: 2/2
1 2 3 4 5 6 7 8
/ / m uc s dn3 1 . e u. i nf i ne on. c om / Ro e m m e l m / M y doc um e n t s / Bo o t l o a d e r _ Re m a ppi ng/ qr c ode . bm p
Production Data
98.3mm
53.3mm
R404 1
9
X1 ADJ_2
JP300
LEFT
D400
10
R403
C304
1
C404
L400
C411 C412
2
D401 40
3
FRONT
C406
C405
R402
6
R401
11
C407
8
C408 IC400
R109
C301 0
C403
12
C402 40
RIGHT
L101
Q C 1 C303
40 40
R110
R303
C409
0
R405
C
L401
C
10
C103
7
C302
1
R412
66mm
R410 X300
X401
R411
SW102
22
IC100
27.9mm
R115
C119
R106
R119
6
10
C127
Q101 0
13 6C 1 5
10
D100
11
C129
1 C
12 LED101 C 11 C R108
CC 8 RC
12 11 11 C
10 C101 X100
4 R R113 0 R107
C102
Q100
9
C113
X102
SW101 L100
C413
IC101
R127
C117 D101
C133
R114
C118
C125
IC102 R407
C123
6
12 IC401
R105
SW100
C 8 C132
R126
12 R122
R408
R100
R101
R102
R103
C
L103
LED100 R104
D103 X302
14mm
LED103 IC402
R120
R409
X101 R112
D102
R121 R124 X301 1
LED104
R130
LED102
ADJ_1
R125
C131
X2
R123
Figure 14
3.2
XMC4700/XMC4800 Relax Kit Series-V1
Production Data
Production Data
*Agenda:
A: Assembled on Relax Kit for 5V Shields only
B: Assembled on Relax Kit and Relax EtherCAT Kit only
C: Assembled on Relax EtherCAT Kit only
D: Assembled on Relax Kit , Relax Lite Kit and Relax EtherCAT Kit only
N: Not Assembled