The document provides instructions for servicing a vehicle. It describes lifting the vehicle with a jack and chassis supports. It also gives directions for draining the gearbox oil, disassembling a single rear propeller shaft by removing the flange fork and shaft from the gearbox, and disassembling a double rear propeller shaft by removing bolts, marking positions, and disengaging shafts.
The document provides instructions for servicing a vehicle. It describes lifting the vehicle with a jack and chassis supports. It also gives directions for draining the gearbox oil, disassembling a single rear propeller shaft by removing the flange fork and shaft from the gearbox, and disassembling a double rear propeller shaft by removing bolts, marking positions, and disengaging shafts.
The document provides instructions for servicing a vehicle. It describes lifting the vehicle with a jack and chassis supports. It also gives directions for draining the gearbox oil, disassembling a single rear propeller shaft by removing the flange fork and shaft from the gearbox, and disassembling a double rear propeller shaft by removing bolts, marking positions, and disengaging shafts.
Lift vehicle 1.Lift the vehicle with jack. 2.Put chassis support at the front and rear end of vehicle. 3.Disassemble tyres
Exhaust gearbox oil
1.Disassemble gearbox oil drain plug 2.Put back drain plug when oil is exhausted.
Rear propeller shaft (single shaft)
1.Disassemble propeller shaft flange fork from driving gear small ① and mark position sign. 2.Disassemble propeller shaft from gearbox main shaft (spline) ②
Rear propeller shaft (double shafts)
1.Mark position sign at the flange fork of mid- coupling and 2nd propeller shaft. 2.Disassemble 2nd propeller shaft bolts beside small driving gear①. 3.Disassemble 2nd propeller shaft bolts from mid- linking position. 4.Disassemble bracket bolts of mid-gear. 5.Disassemble the mid-parts of 1st propeller shaft. Pull 1st propeller to the end of tyre until (spline) fork disengage gearbox main shaft.