Gas Detector Bump Test record log sheet
General Information
This form is provided to record bump test result for gas detector with bump test mode features. The unit will show P for Pass and F for Fail.
Model
Brand: Serial No.: Calibration due date:
Type/No.:
Single parameter Alarm Setting H2S (ppm) LEL (%) O2 (ppm) CO (ppm) Remarks:
Type: Multi parameter Low: 1 10 19.5 25
Multi parameter with pump & hose High: 5 10 23.5 50
Bump Test Result
Test Date Time Pass Fail* Retest Pass Retest Fail** Tester Name
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
Notes:
* : if your gas detector fails to correctly react to the bump test, refer to the owner’s manual for Retest criteria and procedure.
** : if your gas detector fails to Retest, return the unit and this log to related department for further test and calibration (if required).
*** : Replace this form with the new one when the calibration due date has changed
Gas Detector Bump Test record log sheet
Informasi Umum:
Formulir ini digunakan untuk mencatat hasil bump test dari gas detector yang dilengkapi dengan bump test menu/feature. Unit akan
memunculkan tanda P jika bump test berhasil dan F jika gagal.
BW
Brand: Model Type/No.: Serial No.: Calibration due date:
TECHNOLOGIES
Single parameter Alarm Setting H2S (ppm) LEL (%) O2 (ppm) CO (ppm) Remarks:
Type: Multi parameter Low: 1 10 19.5 25
Multi parameter with pump & hose High: 5 10 23.5 50
Hasil Bump Test
Tanggal Test Waktu Pass Fail* Retest Pass Retest Fail** Nama Penguji (Tester)
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
___ : ___
Catatan:
* : Jika Gas Detector anda gagal (Fail) saat dilakukan Bump Test, lihat referensi dari Fabrikan gas detector untuk kriteria dan prosedur Pengujian Ulang.
** : Jika Gas Detector anda gagal (Fail) saat Pengujian Ulang, kembalikan unit dan Log Test ini ke department terkait untuk test dan kalibrasi lebih lanjut (jika perlu).
*** : Ganti form ini dengan form yang baru ketika Tanggal Jatuh Tempo Kalibrasi sudah berubah.