Professional Documents
Culture Documents
CLIENT ID :
Kol-A-3000755785
ROOM NAME :
KITCHEN
LEAD DESIGNER:
Shresthta Bhowmick
Drawing QC Name:
Entrance to Kitchen
B
Arpita
C
A
NOTE :
-All Dimensions in MM
D
-All Depths are Carcase Depths
1. The colours in the drawing
are indicative. For actual
colours refer physical samples.
2. In PLPB Kitchen, the Sink
unit will always be in
BWR/BWP Ply.
3. Shutter thickness - 17-20
mm based on the core type
4.Carcass internal color in
cambric will have shutter
KITCHEN (WALL A) KITCHEN (WALL B) backer as cambric only in case
of laminate finish.
5.There is no assurance of
grain matching for
wooden/texture finishes as the
panels are cut based on
optimization of material
LEAD DESIGNER:
Shresthta Bhowmick
Drawing QC Name:
Arpita
50
CLIENT ID :
M18 C2
Kol-A-3000755785
TOP FILLER
247
M17 C2 ROOM NAME :
LOFT SIDE FILLER KITCHEN
632
M15 C2
M16 C2
LEAD DESIGNER:
290
M14 C2 Shresthta Bhowmick
Dummy Panel M19 C1
M19 C1 (190x632) LOFT BASE
(550x330)
C1
C1 Drawing QC Name:
LOFT BASE Cut on site Arpita
Pearl Black
300
(1050X330) SB M11 A
M13 C1 C1 M11 C1 DATE : January 7, 2022
600
25MM FLOAT SHELF 25MM FLOAT SHELF
(200X330) 350 (450x330) NOTE :
275
-All Dimensions in MM
M12 C1 M10 C1 -All Depths are Carcase Depths
25MM FLOAT SHELF 25MM FLOAT SHELF 1. The colours in the drawing
(200X330) 200 (800x330) are indicative. For actual
800
colours refer physical samples.
2. In PLPB Kitchen, the Sink
600
C1 5.There is no assurance of
M1 C1
Frosty White grain matching for
BASE FILLER wooden/texture finishes as the
panels are cut based on
optimization of material
Accessory
Image from
the
scrapbook
SP-PVC Cutlery Insert 60 Cm Thali Basket (Soft Innotech Drawer - 470 HET 150 BPO 2 Tier Soft
600 Close) Ht - 200 Mm Mm - 30 Kgs Close
NOTE: 1.
2.
PAGE: 4 VERSION 4.9
CLIENT NAME :
ELEVATION B Amartya Ray
50
75 54
M21 C2 898 835 838 M26 C2 CLIENT ID :
LOFT SIDE FILLER TOP FILLER Kol-A-3000755785
ROOM NAME :
M22 C2 M23 C2 M24 C2 KITCHEN
632
M20 C1
LEAD DESIGNER:
LOFT BASE FILLER
M25 C2 Shresthta Bhowmick
(800x330)
LOFT SIDE FILLER Drawing QC Name:
Arpita
V1
V1 LOFT CARCASE DATE : January 7, 2022
600
M8 C1
BWP CARCASE
V1 M9 C1 NOTE :
AND SHUTTER M27 C1 -All Dimensions in MM
LOFT BASE -All Depths are Carcase Depths
(835x330) 1. The colours in the drawing
500 450 are indicative. For actual
colours refer physical samples.
2. In PLPB Kitchen, the Sink
600
M4 C1 M5 C1 M6 C1 M7 C1
grain matching for
wooden/texture finishes as the
panels are cut based on
optimization of material
REMOVABLE
100
MAGNETIC SKIRTING
950 450 600 300
SHUTTER SPECIFICATIONS HINGE
BASE/TALL UNIT SHUTTER DETAILS: WALL UNIT SHUTTER CORE: MISCELLANEOUS DETAILS: NAME COLORS CODE POSITION
SHUTTER: HDHMR SHUTTER: HDHMR LOFT SHUTTER: HDHMR C1, V1 Pearl Black LS-HG-M-22109 MR+ HANDLE
C2 LS-HG-M-21091 MR+ HINGE
BASE OPEN UNIT: NA WALL OPEN UNIT: NA OPEN SHELF: NA Frosty White POSITION
GLASS COLOR: CLEAR CHIMNEY PANELING: NA
GLASS SHUTTER TYPE: ALU.FRAME
HANDLE
CLIENT ID :
M28 C1
NEED EXTRA SHELF Kol-A-3000755785
(1808X330) RS.EQ ROOM NAME :
LOFT FRAME AND SHUTTER KITCHEN
LOFT CARCASE LEAD DESIGNER:
SPOT LIGHT UNDER CX SCOPE
Shresthta Bhowmick
Drawing QC Name:
Arpita
RS.EQ
DATE : January 7, 2022
GLASS SHELF AQUAGUARD
NOTE :
UNIT
-All Dimensions in MM
-All Depths are Carcase Depths
1. The colours in the drawing
are indicative. For actual
colours refer physical samples.
2. In PLPB Kitchen, the Sink
unit will always be in
BWR/BWP Ply.
3. Shutter thickness - 17-20
mm based on the core type
4.Carcass internal color in
cambric will have shutter
backer as cambric only in case
of laminate finish.
5.There is no assurance of
RS.EQ grain matching for
RS.EQ
wooden/texture finishes as the
SINK UNIT panels are cut based on
NO BOTTOM optimization of material
NO BACK
Accessory
Image from
the
scrapbook
Everyday Cylinder Trolley Everyday Detergent PO Non
Aventos HK AHKNSWDG04 SC
NOTE: 1.
2.
PAGE: 6 VERSION 4.9
CLIENT NAME :
Amartya Ray
CLIENT ID :
Kol-A-3000755785
ROOM NAME :
NON-Standard Requirement Table KITCHEN
LEAD DESIGNER:
Shresthta Bhowmick
Module no Module Type Non standard type NSD-Page No Descreption
Drawing QC Name:
Construction/Dimension Arpita
M9 Wall Unit Dimension Page-5(Elevation B) Length change from 600 to 500 DATE : January 7, 2022
NOTE :
Length change from 900 to 838 and
M24 Loft Carcase Dimension Page-5(Elevation B) -All Dimensions in MM
height change from 700 to 632 -All Depths are Carcase Depths
M11A Construction/Dimension Page-3 (Elevation A) Length change from 450 to 350 1. The colours in the drawing
Wall Open Unit are indicative. For actual
Construction/Dimension colours refer physical samples.
2. In PLPB Kitchen, the Sink
Construction/Dimension unit will always be in
BWR/BWP Ply.
Construction/Dimension 3. Shutter thickness - 17-20
mm based on the core type
Construction/Dimension 4.Carcass internal color in
cambric will have shutter
Construction/Dimension backer as cambric only in case
of laminate finish.
Construction/Dimension 5.There is no assurance of
grain matching for
Construction/Dimension wooden/texture finishes as the
panels are cut based on
Construction/Dimension optimization of material
Construction/Dimension
Construction/Dimension
HINGE
POSITION
HANDLE
HINGE
POSITION
HANDLE
CLIENT ID :
ITEM SCOPE INSTALLATION BY SPECIFICATION Kol-A-3000755785
SIZE: NAME &SIZE ROOM NAME :
CUSTOMER HOMELANE KITCHEN
HOB
CUT SIZE: CUTTING DIMENSION LEAD DESIGNER:
Shresthta Bhowmick
CUSTOMER CUSTOMER
NA
TAP
CUSTOMER CUSTOMER
AQUAGUARD NA
NOTE: 1.
2.
PAGE: 8 VERSION 4.9
CLIENT NAME :
Amartya Ray
20 mm counter top
CLIENT ID :
COUNTER TOP Kol-A-3000755785
ROOM NAME :
KITCHEN
2284
LEAD DESIGNER:
40 mm counter top Shresthta Bhowmick
Drawing QC Name:
Arpita
600
NOTE: 1.
2.
PAGE: 9 VERSION 4.9
CLIENT NAME :
Amartya Ray
DADO TILES CLIENT ID :
ELEVATION B Kol-A-3000755785
ELEVATION A ROOM NAME :
389 1896 KITCHEN
LEAD DESIGNER:
Shresthta Bhowmick
Drawing QC Name:
1308
1308
Arpita
600
are indicative. For actual
colours refer physical samples.
2. In PLPB Kitchen, the Sink
unit will always be in
BWR/BWP Ply.
840
840
mm based on the core type
4.Carcass internal color in
50 cambric will have shutter
backer as cambric only in case
1717
of laminate finish.
2285 5.There is no assurance of
ELEVATION C grain matching for
wooden/texture finishes as the
panels are cut based on
optimization of material
1308
600
DADO TILES
TYPE: CERAMIC
840
SUPPLY: CUSTOMER
INSTALLATION: HOMELANE
NOTE: 1.
2.
PAGE: 10 VERSION 4.9
CLIENT NAME :
OTHER SERVICE Amartya Ray
CLIENT ID :
ITEM HOMELANE SCOPE CUSTOMER SCOPE Kol-A-3000755785
ROOM NAME :
CUSTOMER KITCHEN
PAINTING NA LEAD DESIGNER:
Shresthta Bhowmick
Drawing QC Name:
Arpita
CUSTOMER DATE : January 7, 2022
NA
ELECTRICAL NOTE :
SERVICE -All Dimensions in MM
-All Depths are Carcase Depths
1. The colours in the drawing
are indicative. For actual
NA CUSTOMER
CIVIL WORK colours refer physical samples.
2. In PLPB Kitchen, the Sink
unit will always be in
BWR/BWP Ply.
3. Shutter thickness - 17-20
mm based on the core type
4.Carcass internal color in
FALSE CEILING- NA CUSTOMER cambric will have shutter
GYPROC backer as cambric only in case
of laminate finish.
5.There is no assurance of
grain matching for
wooden/texture finishes as the
panels are cut based on
LIGHTS - NA CUSTOMER optimization of material
HAFELE/OTHERS
HOME NA CUSTOMER
AUTOMATION -
SMITCH
NOTE: 1.
2.
PAGE: 11 VERSION 4.9
CLIENT NAME :
STANDARD CONSTRUCTION DETAILS (HANDLE KITCHEN)NOT TO BE EDITED Amartya Ray
CLIENT ID :
Kol-A-3000755785
ROOM NAME :
KITCHEN
LEAD DESIGNER:
Shresthta Bhowmick
Drawing QC Name:
Arpita
50
NOTE:
HORIZONTAL HANDLES
TO BE FIXED AT 50MM
FROM TOP
CLIENT ID :
vertical grain laminted selected for Kol-A-3000755785
chimney covering panel will have
ROOM NAME :
grain direction running horizontally
KITCHEN
LEAD DESIGNER:
Shresthta Bhowmick
Drawing QC Name:
Arpita
50
NOTE:
HORIZONTAL HANDLES
TO BE FIXED AT 50MM
FROM TOP
Vertial panel with vertical grain laminate - Horizontal panel with vertical grain laminate - Back
All panels will be vertical horizontal panel will have grain direction running
horizontally and side verticla panles will have grain running
vertically PAGE: 13 VERSION 4.9
CLIENT NAME :
STANDARD CONSTRUCTION DETAILS (HANDLELESS KITCHE)NOT TO BE EDITED Amartya Ray
CLIENT ID :
Kol-A-3000755785
ROOM NAME :
KITCHEN
LEAD DESIGNER:
Shresthta Bhowmick
Drawing QC Name:
Arpita
CLIENT ID :
Kol-A-3000755785
ROOM NAME :
KITCHEN
LEAD DESIGNER:
Shresthta Bhowmick
Drawing QC Name:
Arpita
A-To be used only in the top. Note: The grains between panels next to
each other may or may DATE : January 7, 2022
not match depending on the optimization
B-To be used below the NOTE :
-All Dimensions in MM
cabinete. KITCHEN DRAWER -All Depths are Carcase Depths
NORMAL LAMINATE HORIZONTAL GRAIN
Blown up Note :Except for float 'L' LAMINATE
1. The colours in the drawing
are indicative. For actual
view Corner, rest all float cabinet colours refer physical samples.
2. In PLPB Kitchen, the Sink
construction remains same unit will always be in
BWR/BWP Ply.
3. Shutter thickness - 17-20
Atlas mm based on the core type
Bracket Note: The grains between panels
4.Carcass internal color in
cambric will have shutter
next to each other may or may backer as cambric only in case
not match depending on the of laminate finish.
optimization
5.There is no assurance of
Blown up view grain matching for
Atlas Hardware Bottom Support RIPPER ON TOP OF THE UNIT
wooden/texture finishes as the
used panels are cut based on
optimization of material
LEAD DESIGNER:
Shresthta Bhowmick
Drawing QC Name:
Atlas Bottom Arpita
Support Note: The grains between panels next to
each other may or may DATE : January 7, 2022
not match depending on the optimization
NOTE :
KITCHEN DRAWER -All Dimensions in MM
-All Depths are Carcase Depths
NORMAL LAMINATE HORIZONTAL GRAIN 1. The colours in the drawing
LAMINATE
are indicative. For actual
SINK UNIT Without Bottom colours refer physical samples.
SINK UNIT With Bottom 2. In PLPB Kitchen, the Sink
unit will always be in
BWR/BWP Ply.
3. Shutter thickness - 17-20
mm based on the core type
4.Carcass internal color in
Note: The grains between panels next to cambric will have shutter
each other may or may backer as cambric only in case
not match depending on the optimization of laminate finish.
5.There is no assurance of
grain matching for
RIPPER ON TOP OF THE UNIT
wooden/texture finishes as the
panels are cut based on
Bottom Ripper, optimization of material
No Back Panel
Atlas Back
Blind Corner Unit Support
Bottom Panel,
No Back Panel
18 mm thick
horizontal ripper of
100 mm each on
front and back of
the unit
LEAD DESIGNER:
Shresthta Bhowmick
Drawing QC Name:
Arpita