Professional Documents
Culture Documents
349d L Excavators Jgb00001-Up (Machine) Powered by c13 Engine (Sebp5662 - 28) - Joystick - Remove
349d L Excavators Jgb00001-Up (Machine) Powered by c13 Engine (Sebp5662 - 28) - Joystick - Remove
Previous screen
Welcome: lnobrega
products: EXCAVATOR
Model: 349D L EXCAVATOR JGB
Configuration: 349D L Excavators JGB00001-UP (MACHINE) POWERED BY
C13 Engine
i04366534
Joystick - Remove
SMCS - 5059-011
Removal Procedure
Start:
a. Release the system pressure. See Disassembly and Assembly, "System Pressure - Release" in this
manual.
Note: The removal procedure is similar for both pilot valves. The following procedure is used to remove the
left pilot valve.
NOTICE
Take all necessary steps to ensure that fluids are properly kept in their
compartments during product inspection, maintenance, testing,
adjustment, and repair procedures. Be prepared to collect fluids in
suitable containers before opening any compartment or disassembling
any components containing fluids.
Remove the filler cap only with the engine off and when it is cold enough
to be touched.
Picture 1 g01215041
1. Remove the protector (3). Remove covers (2) and (6). Remove the cover (5) and the screws on the
back of the cover. Remove the remaining screws (1). Remove the cover (4).
Picture 2 g01215042
2. Disconnect the harness assemblies (9). Remove the screws (7). Disconnect the hose assemblies (10).
Remove the pilot valve (8).
Copyright 1993 - 2019 Caterpillar Inc. Wed Jan 30 2019 09:10:52 GMT-0200 (Brasilia Summer Time)
All Rights Reserved.
lnobrega
Private Network For SIS Graduates.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productsearch/productheaderinfoframeset.jsp&called… 2/2