Professional Documents
Culture Documents
Compact Disc - CD
Compact Disc - CD
(R-10/02)
CD-TECH-SPECS 18/11/02 2:40 PM Page 1
TABLE OF CONTENTS
Introduction 1
Technical Data Sheet 1
Master Input General 2
1. Compact Disc (CD and Compact Disc Recordable (CD-R) 2
2. Digital Audio Tape (DAT) 2
3. Digital Master Tape on 3/4” U-Matic Cassette 3
4. 8MM Exabyte in DDP format 3
Master Input Enhanced CD 3
CD Label Designers Guide – Silkscreen 4
1. Dimensions 4
2. Label Colors 4
3. Compact Disc Logo 4
4. Designation of Origin 4
5. Label Templates 4
6. Artwork Requirements 12
a) Letter sizes and line widths 12
b) Photographic Images 12
c) Trapping 12
d) Resolution 12
7. Supplying Artwork 12
a) Accepted Media 12
b) File Specification Requirements 12
8. Submitting Films 12
a) General Requirements 13
b) Angulation 13
c) Compensation Curve 13
d) Density 13
e) Graduated Screens 13
f) Color Proof 13
g) Registration Marks 13
Disc Serialization 15
CD Print 15
1. Jewel Box Booklet Specifications 15
2. Jewel Box Traycard Specifications 16
3. Jewel Box Insert Card Specifications 16
4. Submitting Digital Files 16
5. Submitting Films 17
6. Sticker Specifications 17
7. Spine Labels 17
CD TECHNICAL SPECIFICATIONS
INTRODUCTION
Within this document you will find all the information needed to create and produce your CD product. Please familiarize yourself with
the contents. The submission of non-conforming elements might slow down the processing of your order and may result in additional
charges for the corrections. Respecting these specifications will ensure you of the best results.
For general enquiries regarding these specifications, please contact your customer service representative.
Americ Disc reserves the right to update this manual as required. Please check with your Account Manager or visit our web site to
ensure you have the most recent version.
AUDIO ROM
Please find below specifications for the submission of master For Audio CDs only: All audio CD-R masters should be recorded
content. without interruption in one single session (disc-at-once) and be
“Red Book” compatible (playable on standard CD players). CD-R
All masters regardless of source will be put on disc as is. If any masters recorded track-at-once often have digital errors in
modifications are required, they must be specified on the P.O. between tracks and may require a manual digital transfer
(pre-mastering charges will apply). Discs that are track
Should your master not meet our specifications and require incremental format are not accepted.
modifications, an additional charge may be applicable.
Track incremental will be converted. All multisession discs must
AMERIC DISC INC. WILL REPLICATE THE EXACT CONTENT OF be closed and finalized.
YOUR MASTER AND CANNOT BE HELD RESPONSIBLE FOR THE
CONTENTS OR QUALITY OF THE MASTER TAPE OR DISC WE
RECEIVE. 2 Digital Audio Tape (DAT)
Americ Disc Inc. will accept your master content in the following DAT cassettes should start at 2 minutes on a continuously
formats: recorded clone of your master i.e. edited and assembled as
1. Compact Disc (CD and Compact Disc Recordable - CD-R) desired for the finished compact disc. Please watch for the
2. Digital Audio Tape (DAT) presence of assemble edits (recordings stopped between tracks),
3. Digital Master Tape on 3/4” U-Matic Cassette uneven audio levels from track to track, sampling frequency
4. 8MM Exabyte in DDP format changes, noises in the pause area between tracks as well as
unusually long pauses (more than 10 seconds).
Other Formats - Americ Disc Inc. also accepts formats that are
not listed above. The highest audio level on a CD is referenced to 0 dB on a Sony
PCM-1630 system. Americ Disc Inc. considers maximum audio
Please contact Customer Service for more information on our levels between -3 dB and 0 dB to be acceptable. If the peak
latest hardware and software additions. Other formats may need levels of the entire DAT do not reach the lower limit of -3 dB,
to be converted (additional charges will apply). and if we have no written confirmation to proceed “as is”, a
production hold will be generated which could cause delays
Compilation work assembled from various sources is available if
required. Please contact Customer Service. DAT sampling frequency should be 44.1 kHz. Tapes recorded at
48 kHz will be digitally converted to 44.1 kHz on our audio
workstations. Tapes recorded at 32 kHz are not acceptable. Use
1 Compact Disc (CD and Compact Disc of two different sampling frequencies on the same tape will
Recordable - CD-R) cause delays and incur additional charges.
All CD formats (CD-AUDIO, CD-ROM, CD-ROM XA, CD-ROM All DAT tapes must come with a timesheet which includes the
Hybrid, CD-Extra, Photo CD, CD+G, CD-I, Video-CD, 3DO, total number of tracks, individual timings for each track and any
CD-Karaoke, etc.) are accepted for mastering. related comments: noises, special effects (intentional vinyl noise,
loops, etc.), recording defects (dropouts, glitches, static, etc.), low
CDs and CD-R media should be high quality and free from levels, abrupt track start/stops, hidden or bonus track(s), etc.
scratches and imperfections. Incomplete timesheets or DAT tapes sent without timesheets will
cause delays in processing. Start ID codes are not required but
If required on the finished CDs, ISRC codes must be already can be very helpful in the case of live recordings or cross fades
present on the “master” CD or CD-R to avoid additional charges. between tracks.
In the event that an incoming U-Matic tape already has a PQ • Separate Audio and ROM sources can be assembled by
burst (table of contents information), the tape will be transferred Americ Disc (pre-mastering charges apply). Please send
“as is” and Americ Disc Inc. will not accept responsibility for the MAC and PC files separately. A CD-R will be sent for
contents and/or incorrect PQ code locations. For U-Matic tapes approval before starting the replication process.
that do not have a PQ burst, you must provide a detailed
timesheet listing all the songs with frame accurate track
start/stop SMPTE timings (additional charges may apply).
Americ Disc Inc. can reproduce any color from the Pantone Color
Formula Guide 1000 as well as the Pantone Metallic Color Guide. MA
DE IN CANADA
Please be aware that slight color deviations may occur between
color printed on a white surface and the same color printed on
the CD’s aluminum colored surface. This is due to aluminum MADE IN U.S.A. Made in U.S.A.
reflecting light. The color will always appear darker on a white MADE IN U.S.A. Made in U.S.A.
MA
DE IN U.S.A.
Type of Disc Options Available
Regular CD 1 to 6 colors, including one back
FAN-CD ground color printed on the entire
Digital Business Card CD printing area, ie:
Precision Card CD • 1 background color + 5 PMS colors,
Shaped CD or 5 CD LABEL TEMPLATES
80mm / 3” CD • 4-color process + 1 background
color + 1 PMS
AMERIC DISC INC. RECOMMENDS THE PREPRINTING OF AN
ENTIRE WHITE BACKGROUND ON THE PRINTING AREA. IF YOU
CHOOSE NOT TO USE A WHITE BACKGROUND, PLEASE BE
AWARE THAT THERE MAY BE COLOR DEVIATIONS BETWEEN
3 COMPACT DISC LOGO THE PRINT ON THE ALUMINUM COATED PART AND THE
NON-ALUMINUM COATED PART OF THE CD.
The Compact Disc logo must be seen clearly on the disc in
accordance with the ''Red Book'' standard. Therefore, the color Templates are available for download on our website at:
contrast between the logo and the background color must be at www.americdisc.com
least 50%. Source: Red Book. The Compact Disc logo is an
internationally registered and protected trademark; no deviations The “A” specifications offer printing only on the aluminum-
are permitted. The logo must not be distorted, squeezed, coated part of the disc. The “B”, “C” and “D” specifications offer
decomposed, framed or composed of parts with different colors. printing on the aluminum-coated part and the interior parts of
See examples: the CD.
SPEC
SPEC C116 SPEC
B116 D116
SPEC SPEC
A116 E116*
Maximum Maximum
116 mm - 4 9/16" 116 mm - 4 9/16"
18 mm - 11/16"
23 mm - 29/32"
26 mm - 1 1/32"
35 mm - 1 3/8"
46 mm - 1 25/32"
* SPEC E116
SPECIAL ORDERS ONLY.
METALIZED AREA
118 mm / 4 41/64"
VERIFY WITH YOUR ACCOUNT
MANAGER AND THE PLANNING MIRROR BAND
DEPARTMENT FOR DETAILS 36 mm - 45.8 mm
1 27/64" - 1 13/64"
SPEC
SPEC C116 SPEC
B116 D116
SPEC SPEC
A116 E116*
Maximum Maximum
116 mm - 4 9/16" 116 mm - 4 9/16"
18 mm - 11/16"
23 mm - 29/32"
26 mm - 1 1/32"
35 mm - 1 3/8"
46 mm - 1 25/32"
* SPEC E116
SPECIAL ORDERS ONLY.
METALIZED AREA
118 mm / 4 41/64"
VERIFY WITH YOUR ACCOUNT
MANAGER AND THE PLANNING MIRROR BAND
DEPARTMENT FOR DETAILS 36 mm - 45.8 mm
1 27/64" - 1 13/64"
8 CM - 3” CD LABEL TEMPLATES
C76
B76 D76
A76 E76*
Max. Max.
76 mm 76 mm
2 63/64" 2 63/64"
18 mm - 11/16"
23 mm - 29/32"
26 mm - 1 1/32"
35 mm - 1 3/8"
46 mm - 1 25/32"
* SPEC E76
SPECIAL ORDERS ONLY.
METALIZED AREA
78 mm / 3 5/64"
VERIFY WITH YOUR ACCOUNT
MANAGER AND THE PLANNING MIRROR BAND
DEPARTMENT FOR DETAILS 36 mm - 45.8 mm
1 27/64" - 1 13/64"
2A 1A 3A 4A
58mm 56mm 64mm 68mm
IMPORTANT:
For registration purposes,
please leave these marks
on your artwork. Must
print black or darkest
color available.
METALIZED AREA
Straight Corners
MIRROR BAND
1A 2A 3A 4A 36 MM - 45.8 MM
2B 1B 3B 4B
58mm 56mm 64mm 68mm
IMPORTANT:
For registration purposes,
please leave these marks
on your artwork. Must
print black or darkest
color available.
METALIZED AREA
Rounded Corners
MIRROR BAND
1B 2B 3B 4B 36 MM - 45.8 MM
35B 50B
58mm 60mm
IMPORTANT:
For registration purposes,
please leave these marks
on your artwork. Must
print black or darkest
color available.
METALIZED AREA
Straight Corners
MIRROR BAND
35A 50A 36 MM - 45.8 MM
This is not a CD Business Card, but a Precision Card. The manufacturing procedure is very different.
The metalized area is only at the center area, in a circle slightly smaller than the card.
The machine cuts only the plastic.
35B 50B
58mm 60mm
IMPORTANT:
For registration purposes,
please leave these marks
on your artwork. Must
print black or darkest
color available.
METALIZED AREA
Rounded Corners
MIRROR BAND
35B 50B 36 MM - 45.8 MM
This is not a CD Business Card, but a Precision Card. The manufacturing procedure is very different.
The metalized area is only at the center area, in a circle slightly smaller than the card.
The machine cuts only the plastic.
ABCDEFG HI J KLM NO P Q R S T U V WX Y Z
ABCDEFGHIJKLMNOPQ
RSTUVWXYZ Other formats may be accepted. Please verify with your Account
min. 5 pts min. 7 pts Manager prior to submission.
Please indicate:
• Color name (PMS number)
• If solid white background is required
REGISTRATION MARKS
Ø = 2 mm Ø = 2 mm
45 mm
45 mm
min
10 m
minimum
maximum
L’épaisseur
10 mm - 0.4”
thickness
maximale
1 mm
est de 1 pt.
Ø = 2 mm Ø = 2 mm
65 mm - 2 9/16"
minimum
10 mm - 0.4"
Americ Disc Inc. offers the possibility of printing a serial number, 1 Jewel Box Booklet Specifications
a series of letters or a barcode on each CD, for internal use, for
identification and tracking purposes. The barcode or alpha- DIAGRAM 1 DIAGRAM 2
numeric fonts are printed on the disc with an ink jet process. 121 mm - 4 3/4"
The serial number, the series of letters or the barcode are printed
approximately 5 mm from the center hole of the disc. It is
printed on the same side as the label.
120 mm - 4 23/32"
120 mm - 4 23/32"
This service requires an additional operation, which affects the
price of your CD. Listed below are some features of the printer
used for disc serialization:
DIAGRAM 3
ABCD123456
5 x 7tl (twin line) ABCD123456
150 mm - 5 29/32"
118 mm - 4 5/8"
10 X 16 twin ABCD12345 PERFORATION LINE
constant only. Range available: 1 - 99. Template downloads are available on our website at:
www.americdisc.com
A copy of every screen font and printer font used in your artwork
Automatic Insertion. and layout programs should be included with the files sent.
Size: Width 50mm to 100mm Scan must be 300 dpi to be printed 150 lpi.
Length 50mm to 120mm
All scans and pictures must be in EPS or TIFF formats and should
A folded edge will be parallel to the jewel box hinge. be saved as separated CMYK files.
Paper must be coated. Leave 1/8" bleed all around where required. All crop-marks, fold,
perforation and die cuts should be indicated.
Single-sheet, single-fold.
5 Submitting Films • Stickers must appear on the top of the roll, as shown in
diagram.
We can to print: 1 to 6 colors, including 4 process colors and • The interior diameter of the tube that holds the roll of stickers
2 pantone colors. must be 76 mm or 3”. (Maximum outer diameter = 12”)
• The stickers must have a minimum thickness of 0.0381 mm
Americ Disc Inc. requires final composed full size films, with the or 0.0015”.
exception of multiple page spreads such as booklets and folders. • If the roll is made of transparent film a mark/line (white if
possible) should appear between the stickers.
Negatives should be emulsion down, right reading. • The mimimum free space between the stickers must be
6,35 mm or 0.25”.
Leave a 1/8 inch bleed all around where required. Crop-marks, • Stickers must be read from left to right. “Bottom off” or
fold, perforation and die cuts should be indicated. “Right off”.
• Minimum sticker size = 1/2” x 3/4”
Line screens 150 lpi should be used. If a higher screen value is • Maximum sticker size = 2” x 2”
required Americ Disc should be notified to avoid possible prob- • The quantity of stickers must be indicated on each roll.
lems at press time. Please consult your Account Manager for stickering costs.
A proof MUST be sent with all final films. Where color is being
used a color proof such as Matchprint or ColorKey is required. If 7 Spine Labels
a laser proof is supplied Americ Disc cannot be held accountable
for a mismatch between the final printed product and the proof. Americ Disc Inc. offers you the possibility to put top spine labels
(barcodes, title, logo of your company...) on the following types
For B&W work a Dylux (blue print) will suffice. Samples (if of packaging: Single jewel box, Double jewel box slim line-T or Z.
available) are always a good reference if there have been no To know more about the available fonts and type of barcodes,
changes since the last printing. please contact our Customer Service department.
Where multiple page booklets & folders are involved, a Mock-up 122 mm - 4 13/16"
is absolutely required to assemble the product with the right Printed White area
Pull
to accept Thermal
page layout. A simple black and white laser or hand drawn Imprinting 33.33 mm - 1 5/16"
mock-up with the pagination will suffice.
6 Sticker Specifications
NOTES
NOTES
Compact Disc - CD
www.americdisc.com