Professional Documents
Culture Documents
a) 2 b) 5 c) 7 d)8
The process of direct transmission of heat through a material is known as CO1
2 __________
The amount of heat flow through a unit area of material of unit thickness in CO1
4 one hour, when the temperature difference is maintained at 1°C is known as
___________ of the material.
How many earth connections are required for the motor frame as per the IE CO2
16 rule 61?
18 What is the amount of charcoal and salt needed for GI Pipe earthing? CO2
a. Charcoal 5 kg, salt 8 kg
b. Charcoal 10 kg, salt 8 kg
c. Charcoal 10 kg, salt 10 kg
d. Charcoal 5 kg, salt 5 kg
What is the specification of GI earth plate? CO2
19 a. 60 cm * 60 cm * 3 mm
b. 60 cm * 60 cm * 6 mm
c. 60 cm * 60 cm * 4 mm
d. 60 cm * 60 cm * 5 mm
20 What is / are the various types of fuse? CO2
a. Kit Kat type
b. Cartridge type
c. Round type
d. All of these
SET-1
KUPPAM ENGINEERING COLLEGE, KUPPAM – 517425
III B.TECH II SEM (R19) ME – JNTUA DECRIPTIVE MID TEST – I
Building services and maintenance –(19A01604b)
Time: 90 Minutes Date: 16-7-2022 FN Max Marks:
15Each question carries 5 marks
Q. Question CO CO’s
NO mapp level
ed
1 Explain the forms of thermal insulating material and also general CO1
methods of thermal insulation
Or
Compute the thermal transmittance (U) value for 22.5 cm thick brick
outside wall provided with 15cm thick cement plaster on both the sides.
What will be the modified value of U if an air gap of 5cm is introduced
between two halves of brick wall?
2 Explain the general fire safety requirements for building in detail CO2
Or
In brief explain the fire resistant construction of different components in
building
3 Explain pipe earthing with a neat diagram CO1
Or &
Write any 15 general rules related to wiring CO2
SET-II