Professional Documents
Culture Documents
INDEX
SL NO ITEM DESCRIPTION
1 Reference IFC Drawings
3 Test Reports
5 ISO Certificates
6 Schedule of Materials
2|Page
EXPO 2020 DUBAI – FRANCE PAVILION
Project Ref.: EXPO 2020 DUBAI Rev. Date
Doc. Ref.: A 16/08/20
FRA-FD-AR-SEC-0300-Cross FRA-FD-AR-SEC-0100-Cross
Section 3 Section 1
NOTES:
THIS DRAWING IS THE PROPERTY OF THE DESIGN
0.55
PROFESSIONAL AND MAY NOT BE REPRODUCED OR USED
0.55
1 WITHOUT HIS WRITTEN PERMISSION.
4.40
4.40
TO THE COMMENCEMENT OF ANY WORK ON SITE.
LEGEND :
1a
Boundary Line
4.40
4.40
2
3.75
3.75
2a
3.75
3.75
3
FRA-FD-AR-SEC-0200-Cross FRA-FD-AR-SEC-0200-Cross
Section 2 Section 2'
3.75
3.75
3a
44.56
3.75
3.75
46.15
4
+21.65
52.82 DMD
3.75
3.75
4a
3.75
+8.40
3.75
- - - -
39.57 DMD
63.00
63.00
3.75
3.75
Project
3.75
3.75
Client
COFREX
6 77, boulevard Saint Jacques
75014 Paris
Tel:
E-mail:
Representative Company
6.30
6.30
BESIX
Gemeenschappenlaan 100
1200 Brussel
Tel: +32 (0)2 402 62 11
E-mail: communication@besix.com
1.59
Associated Architects
7
Atelier du Prado / Architectes
3, rue de Nancy
75010 Paris
Tel: + 33 1 42 78 80 20
4.20
4.20
E-mail: info@atelierduprado.com
Technical Consultants
6.30
6.30
OTE
44, rue de Montmorency
75003 Paris
16.85
Tel: +33 (0)3 88 67 55 55
16.85
+4.63
E-mail: ote.direction@ote.fr
35.80 DMD
Partners
7b
SNAIK
76, rue de Fontenay
94300 Vincennes
Tel: +33 1 43 98 20 20
4.20
4.20
E-mail: contact@snaik.fr
Architectural Consultant
8
RICE PERRY ELLIS
P.O. Box 454801 Dubai
Tel: 00971 4 599 4788
2.65
2.65
E-mail: rpedubai@emirates.net.ae
Structural Consultant
ROBERT BIRD GROUP
Ibn Battuta Gate
Level 4, Office Suite 415
Jebel Ali, Dubai
P.O. Box 118570
Tel: 00971 4 447 1866
Email: MENA@robertbird.com.au
MEP Consultant
HOARE LEA
Suite 2003 International Tower
24th (Al Karamah) Street
P.O. Box 79173 Abu Dhabi
Tel: 00971 2 441 1644
E-mail: hello@hoarelea.com
Drawing Title
FRA-FD-AR-SEC-0300-Cross FRA-FD-AR-SEC-0100-Cross
Section 3' Section 1'
Roof Level Plan
A B C D E F G C RPE
19.97 20.91 13.92 Scale : Drawn.: ADP+CGA Project no. Drawing no. Rev.
1 : 100
0.36
0.44 10.00 10.00 10.00 10.00 7.00 7.00
Date :
Chk. : ADP+CGA
73 FRA-FD-AR-FLO-0600 21
54.80 09/08/2019 13:11:58 App. : ADP+CGA
DM Stamp
NOTES:
THIS DRAWING IS THE PROPERTY OF THE DESIGN
PROFESSIONAL AND MAY NOT BE REPRODUCED OR USED
WITHOUT HIS WRITTEN PERMISSION.
5.75
6.98
Glass railing 1.10m
8.35
47.37 DMD
4th Floor level + 16.20
1.37
43.17 DMD
3rd Floor Level + 12.00
21.65
21.65
4.91
Metal panels
39.17 DMD
2nd Floor Level + 8.00
15.90
13.30
4.64
35.17 DMD
1st Floor Level+ 4.00
F&B Kiosk
3.75
Display screen Display screen
31.17 DMD
Ground Floor Level + 0.00
- - - -
Project
Client
MAXIMUM BUILDING ENVELOPE HT: 27 m COFREX
77, boulevard Saint Jacques
WEST PLOT BOUNDARY LINE
BESIX
Photovoltaic building-integrated panels Blue glass panels Gemeenschappenlaan 100
G F E (PV tiles) 0.87*0.87m D
6 colors : 2 onyx white, 3 blue, 1 Green
C B A 52.82 DMD
1200 Brussel
Roof Level + 21.65 Tel: +32 (0)2 402 62 11
E-mail: communication@besix.com
Associated Architects
E-mail: info@atelierduprado.com
Cafeteria terrace
Technical Consultants
18.90
75003 Paris
Tel: +33 (0)3 88 67 55 55
E-mail: ote.direction@ote.fr
21.65
21.65
Partners
SNAIK
39.17 DMD 76, rue de Fontenay
2nd Floor Level + 8.00
94300 Vincennes
Tel: +33 1 43 98 20 20
E-mail: contact@snaik.fr
13.30
Architectural Consultant
Structural Consultant
Metal panels ROBERT BIRD GROUP
Ibn Battuta Gate
Section Level 4, Office Suite 415
2.75
2
101_1
Jebel Ali, Dubai
31.17 DMD
Ground Floor Level +0.00 P.O. Box 118570
Tel: 00971 4 447 1866
Email: MENA@robertbird.com.au
MEP Consultant
HOARE LEA
Suite 2003 International Tower
24th (Al Karamah) Street
P.O. Box 79173 Abu Dhabi
Tel: 00971 2 441 1644
E-mail: hello@hoarelea.com
Drawing Title
FRA-FD-AR-ELE-0102-South Elevation
Ech: 1 : 100 North and South
Elevations
C RPE
Scale : Drawn.: ADP+CGA Project no. Drawing no. Rev.
1 : 100
Date :
Chk. : ADP+CGA
73 FRA-FD-AR-ELE-0100 21
09/08/2019 13:43:49 App. : ADP+CGA
EXPO 2020 DUBAI – FRANCE PAVILION
Project Ref.: EXPO 2020 DUBAI Rev. Date
Doc. Ref.: A 16/08/20
α
α
α
EXPO 2020 DUBAI – FRANCE PAVILION
Project Ref.: EXPO 2020 DUBAI Rev. Date
Doc. Ref.: A 15/08/20
Grid-Tied Inverter
SG110CX New
Multi-MPPT String Inverter for 1000 Vdc System
100%
98%
MPPT
DC1
(1)
96%
Eff iciency
L1
DC AC AC AC
EMI Filter relay EMI
L2 94%
Vdc=550V
MPPT L3 92% Vdc=585V
DC9 (9)
N Vdc=850V
90%
string current DC DC SPD DC link Inverter AC SPD PE
sensor Switch Circuit 88%
0% 20% 40% 60% 80% 100%
© 2019 Sungrow Power Supply Co., Ltd. All rights reserved. Subject to change without notice. Version 1.4
SG110CX
© 2019 Sungrow Power Supply Co., Ltd. All rights reserved. Subject to change without notice. Version 1.4
EXPO 2020 DUBAI – FRANCE PAVILION
Project Ref.: EXPO 2020 DUBAI Rev. Date
Doc. Ref.: A 15/08/20
Solar DC Cables
DOCUMENT NAME: MAJOR EQUIPMENT TECHNICAL SPECIFICATIONS/DC SOLAR CABLE
Electron beam cross-linked polyolefin co-polymer (EB- E-Beam Cross linkable LSOH (Polyolefin Type) Compound as
8.1 Material
XLPO) as per IEC/IS Standards per Annexure B Table B.1 of BS EN 50618
8.2 Nom.Thickness of Outer seath mm As per EN50618 0.8 mm
8.3 Nominal Overall Diameter of cable mm To be filled by supplier 5.7 ± 0.4mm
8.4 Approx cable weight kg/km To be filled by supplier 58 kg/km
8.5 Copper Index kg/km To be filled by supplier Class 5 Grade
13.0 General
13.1 Packing Length - (in m) Packaging length of 500/1000m Will be confirmed later
13.2 Cable End Sealing YES (HEAT SHRINKABLE ELSTOMERIC CAP ) Confirm
In addition to manufacturer's identification on cables As
per EN50618 & following marking also be provided over
outer side.
YEAR 'H1Z2Z2-K' POLYCAB 1.5KV DC SOLAR CABLE SIZE EBXL
13.3 Marking 1. Cable Size & Voltage Grade
'EN 50618:2014' WITH SEQUENTIAL METER MARKING
2. Sequential marking of length of the cable in meters at
every meter
3. Word "XLPO" at every meter
outer sheath shall be black in color. Solar cable
13.4 Color Identification with positive polarity should have marking of red line on Black-50% | Black with Red strip with 50%
black outer sheath.
13.5 Bending Radius To be confirmed by supplier 8 - 10 times the overall diameter of the cable
14.0 Test Reports & Certifications
14.1 EN/IEC Certification To be confirmed by supplier Confirmed
DOCUMENT NAME: MAJOR EQUIPMENT TECHNICAL SPECIFICATIONS/DC SOLAR CABLE
AC Cables
1. CABLES IN FIRE SITUATIONS
1.1 INTRODUCTION
Since the beginning of civilization, modifications that standard repeatable tests that test each of these issues
we have made to our own environment, in combination under narrowly defined conditions, and that can be
with fire, have frequently resulted in increased dangers. used to grade cables according to their performance.
The structures we build can restrict our abilities to
flee fire, they can also concentrate heat, smoke and The various features in fire performance cables add to
dangerous fumes. They can also restrict the flow of the cost of the cables. It is therefore important that the
oxygen that would otherwise replenish the oxygen design features appropriate to each situation are the
they consume. ones chosen, and cost-adding features not needed are
omitted.
In current times we have added a further complication.
Throughout the modern world, almost all of the This brochure has been written to provide guidance for
buildings constructed contain cables, sometimes in the selection of cables most appropriate to end users’
large quantities. These are there to provide energy, needs, specifically in fixed installations, with particular
lighting, telecommunications and control, and are emphasis on the fire performance characteristics. Also
installed in ducts, cable trays, plenum cavities, floor provided are the details and explanation of the tests to
cavities and service shafts. As such they are distributed which the cables are subjected.
throughout our buildings, and therefore can be a major
contributor to the spread of building fire.
Halogens are a group of highly reactive chemically All cables release toxic gasses when burned, although
related elements, the commonly encountered ones some gases are worse than others. Carbon dioxide, for
being fluorine, chlorine, bromine and iodine. Fluorine example, is relatively benign, but in sufficient quantity
and chlorine are gasses under normal conditions, and for sufficient time it will still cause fatalities.
bromine is a liquid and iodine is a solid. With a little Chlorine gas, as discussed above, is definitely not
amount of heating, they all turn to gas. All halogens benign.
readily form acids, and this can happen when a halogen
released as a gas by a fire comes into contact with There are standard tests that have been devised that
water used to extinguish the fire. Much of the damage can be used to calculate, for example, a toxicity index
that occurs after a fire can be caused by these acids, for a product. However, this is seldom required of
as they will attack anything from the circuit boards in cables.
computers to the structural steel giving the building
strength. 1.5 SMOKE EMISSION
Smoke is a major cause of fatalities in a building fire.
The halogen gasses can also form acids when they
come into contact with moist living surfaces such as Smoke is a mixture of heated gasses and liquid droplets,
eyes and lungs, causing serious injury. and particles released by combustion. It is a major
hindrance to people trying to escape a fire simply
Halogens are also good fire retardants, meaning that because they cannot see where they are going. While
some of the options available for making a cable this is obvious, smoke also worsens our survivability
flame retardant can also mean that the cable will emit in a fire by displacing oxygen, transferring heat and
dangerous gasses in a fire. Where this is not important conveying toxic gasses and soot as well as acids
it is quite easy to make a cable flame retardant by resulting from the presence of halogen gasses.
using halogenated materials.
Finally it can also accumulate in areas removed from
the actual fire, effectively increasing the dangerous
areas resulting from the fire.
Fires are very destructive, and one of the first things to So far we have alluded to the possibility of trade-offs
go in a fire is the cabling. The sheathing and insulation is being required to achieve the essential features. The
burned off, and the cores then comes into contact with trade-offs are that the cheaper materials are good in
one another with the resulting fault either destroying some areas but poor in others. Materials that are good
the conductors, or tripping the power supply. Where in more than one area are more expensive, adding a
the cabling is used to power emergency services, such further dimension. The features must be chosen that
as fire-fighting equipment and lighting, or to provide are most suitable to the intended use, balancing:
Public Address General Alarm (PAGA) systems • Basic performance as a cable,
and vital communications. These facilities are lost as • Flame retardance,
soon as the cable fails. It is therefore advantageous • Halogen gas emission,
to design such cables with the ability to survive a fire • Toxic gas emission,
much longer than ordinary cables. • Smoke emission,
• Circuit integrity,
Circuit integrity cables are sometimes referred to as • Cost.
“fire survival cables”, but in reality no cables will survive
indefinite fires. The tests used to rate such cables are Many standard materials can be modified to achieve
therefore designed to subject the cables to closely the features required, and these modification invariably
defined fires, while being subjected to other equally add some costs to the material. The base materials
closely defined traumas, for minimum periods. that are commonly used in cables are described below.
This is not commonly used as an insulation, but is A very tough material, this is usually used only as an
often used as a bedding and sheathing material. It is interstice filler in multicore cable. It is similar to PE in
an environmentally friendly material, in that it does not that it is an environmentally friendly material and in that
add toxic chemicals to the environment as it decays. it does not add toxic chemicals to the environment as it
When burned it produces mostly carbon dioxide and decays. When burned, it also produces mostly carbon
water, and it does this without producing smoke. It is dioxide and water, without smoke. It is thermoplastic,
thermoplastic, meaning that it softens as it is heated, meaning that it softens as it is heated, and melts into
and melts into a very fluid waxy liquid. It burns well and a very fluid waxy liquid. It burns well and can sustain a
can sustain a flame in free air. flame in free air.
While the actual test methods used are described in some detail below, the standards most in use in the GCC region are given
in the table below.
Flame propagation
IEC 60332-1 Single cable subjected to a 1 kW (bunsen type) burner.
IEC 60332-2 Single small cable subjected to a 1 kW (bunsen type) burner.
IEC 60332-3 Groups of cables subjected to a 20 kW burner.
Smoke emission
IEC 61034 Standard 3 m cube.
Halogen gas emission
IEC 60754-1 Direct measurement of halogen gas for low concentrations.
IEC 60754-2 Measurement of pH and conductivity for not-as-low concentrations.
IEC 60754-3 (Still draft.) Direct measument using ion chromatography.
Circuit integrity
IEC 60331 IEC circuit integrity tests.
EN 50200 European circuit integrity tests, suitability for PH120.
BS 6387 Early British circuit integrity tests, defined as "CWZ".
BS 7846 British circuit integrity tests, including defining "F120".
BS 8434-2 Similar to EN 50200 (PH120), but more stringent.
BS 8491 Similar to BS 7846.
BS 8519 Similar to BS 8519 (F120), but more stringent.
Toxicity
DStan 02-713 Not often performed on cables.
Limiting Oxygen Index
ASTM D 2863-09 Direct measurement of LOI.
Fire Characteristic
Cable Type Flame Halogen gas Smoke Maintain circuit OCI Brand
retardancy emission emission integrity
LV PVC Yes High High No Standard
LV XLPE No Low Low No Standard
Flame retardant (PVC) Yes High High No FR PVC
Flame retardant (XLPE) Yes Low Low No FR XLPE
LSF Unarmoured Yes Low Low No OCIFLAM-LSHU
LSF Armoured Yes Low Low No OCIFLAM-LSHA
OCIFLAM-FS1
OCIFLAM-FSA
Circuit integrity Yes Low Low Yes
OCIFLAM1 PREMIUM
OCIFLAM2 PREMIUM
3.1 PURPOSE
OCIFLAM LSZH cables are divided into two main categories. The first category is unarmoured low smoke halogen free
cables, with the name of OCIFLAM-LSHU® and the second category is armoured low smoke halogen free cables, with the
name of OCIFLAM-LSHA®. Those cables are used for different applications such as electric power, and control cables to be
able to eliminate the emission of corrosive halogen gases and the emission of low smoke during combustion. Further, they can
resist the propagation of flames when burned.
3.2 SPECIFICATIONS
1 Conductors Stranded copper, stranded aluminium
2 Sizes 1.5 mm2 to 1 000 mm2
3 Number of cores 1, 2, 3, 3½, 4, and 5
4 Insulation materials XLPE
5 Bedding material EVA/ PE (polyolefin)
6 Armour Armoured or Unarmoured
7 Outer serving EVA/ PE (polyolefin)
8 Cable specification IEC 60502, BS 6724, BS 5467
9 Test method (Halogen Emission) IEC 60754, IEC 60754, BS EN 60754
10 Additional test methods (Flame Propagation) IEC 60332, BS EN 60332
11 Additional test methods (Reduce Smoke) IEC 61034, BS EN 61034
OCIFLAM-LSHU® and OCIFLAM-LSHA® are meant to OCIFLAM-LSHU® and OCIFLAM-LSHA® are both
be used in situations where large numbers of people are marked with the letters “LSZH” embossed on the outer
gathered in confined spaces such as at airports, hotels, sheath.
malls, hospitals, tunnels and the like. Moreover, these
cables are suitable for places where sensitive equipment is
installed such as main frame computer rooms, data server
rooms, distribution substations and medical equipment
rooms and similar areas of critical importance.
Ground temp. 35 °C
Depth of laying in ground 0.5 Mtr.
Thermal resistivity of soil 1.2 K.m/W
Trefoil Touching
Ground temp. 35 °C
Depth of laying in ground 0.5 Mtr.
Thermal resistivity of soil 1.2 K.m/W
Trefoil Touching
Ground temp. 35 °C
Depth of laying in ground 0.5 Mtr.
Thermal resistivity of soil 1.2 K.m/W
Trefoil Touching
Ground temp. 35 °C
Depth of laying in ground 0.5 Mtr.
Thermal resistivity of soil 1.2 K.m/W
Trefoil Touching
Description: PLAIN ANNEALED COPPER CONDUCTORS, XLPE INSULATION, LSF BEDDING, LSF SHEATH
ELECTRICAL PROPERTIES
Impedance Volt drop Volt drop
Cable size Current ratings in Air
mm2 1 1
2c 3c 3 /2 c 4c 5c 2c 3, 3 c, 4 c & 5 c
/2
Ω/km
A A A A A mV/A/m mV/A/m
Ambient temp. 50 °C
Ground temp. 35 °C
Depth of laying in ground 0.5 Mtr.
Thermal resistivity of soil 1.2 K.m/W
Trefoil Touching
17.0 19.0 22.0 22.0 26.0 625 890 1080 1170 1505
19.0 21.5 24.5 24.5 28.5 820 1180 1365 1545 1980
21.5 24.0 27.0 27.0 33.0 1070 1545 1815 2035 2650
24.0 27.5 31.0 31.5 38.0 1485 2175 2545 2870 3735
Table 5 OCIFLAM LSHU MULTI-CORE UNARMOURED CABLES ELECTRICAL AND PHYSICAL PROPERTIES
In situations where it is necessary to maintain circuit integrity for an extended period during a fire, for example where
maintaining electricity supply is vital for both the safety of people and the safety of valuable equipment, circuit integrity cable
is recommended. The OCIFLAM® circuit integrity cable range of electric power, and control cable is specially designed to
reduce the risk of failures of these special situations.
In addition to their circuit integrity operation during fire, they also are flame retardant, emit small amounts of smoke and no
corrosive gasses emission.
The OCIFLAM circuit integrity cables are divided into 4 categories as per the following table:
Each conductor of OCIFLAM® circuit integrity cable is wrapped with a layer of fire resisting mica glass tape in order to
prevent phase to phase, and phase to earth contact, even if the insulation is burnt.
4.2 APPLICATIONS
OCIFLAM® Circuit integrity cables are intended to be used in situation in which some special circuits need to be maintained
for a specific time despite being burned. These circuits include the following:
• Lighting circuits in factories, shopping centers, hotels, airports, and public buildings
• Circuit that supplies AC and fans
• Data and control circuits
• Circuits supplying emergency firefighting plant such as water pumps and sprinklers
• Circuits of lifts and escalators
Ground temp. 35 °C
Depth of laying in ground 0.5 Mtr.
Thermal resistivity of soil 1.2 K.m/W
Trefoil Touching
Description: PLAIN ANNEALED COPPER CONDUCTORS, XLPE INSULATION, LSF BEDDING,GALVANISED STEEL
WIRE ARMOURED, LSF SHEATH
ELECTRICAL PROPERTIES MECHANICAL PROPERTIES
Typical overall
Current ratings Impedance Volt drop Volt drop Approximate mass
Cable diameter
size Ground Duct Air
mm2 2c 3&4c
3& 3& 3& 2, 3 & 4 c 2c 3c 4c 2c 3c 4c
2c 2c 2c mV/ mV/
4c 4c 4c Ω/km
A/m A/m mm mm mm kg/km kg/km kg/km
A A A A A A
1.5 33 28 27 22 24 20 15.4 30.9 26.7 14.0 15.0 16.0 320 355 400
2.5 42 36 35 29 32 27 9.45 18.9 16.4 15.5 16.0 17.0 380 420 485
4 56 47 46 39 43 37 5.88 11.8 10.2 17.0 17.5 19.0 530 595 675
6 70 59 58 48 55 46 3.93 7.9 6.81 18.0 19.0 20.5 625 710 830
10 94 79 77 65 74 64 2.33 4.7 4.04 20.0 21.0 23.0 795 915 1075
16 121 102 99 83 98 83 1.47 2.9 2.55 22.0 23.0 25.0 945 1155 1360
25 157 131 127 107 128 109 0.931 1.9 1.61 21.5 25.0 28.5 1020 1520 1910
35 188 157 153 128 158 134 0.674 1.3 1.17 25.0 27.5 31.0 1430 1885 2365
50 223 187 181 152 190 163 0.501 1.0 0.867 27.5 30.5 33.5 1775 2350 2935
70 273 229 224 187 239 205 0.352 0.703 0.609 30.5 34.0 39.0 2295 3090 4210
95 328 274 269 226 295 253 0.258 0.516 0.447 34.0 38.5 42.5 3145 4245 5370
120 372 312 307 258 341 293 0.210 0.421 0.364 36.5 42.0 49.0 3730 5155 7035
150 417 349 345 291 389 335 0.176 0.353 0.305 40.0 47.5 53.5 4425 6590 8380
185 470 394 391 329 449 386 0.148 0.296 0.257 44.0 50.0 58.5 5700 7830 10125
240 544 455 453 380 530 456 0.124 0.247 0.214 50.5 56.0 64.5 7185 9820 12720
300 609 509 509 427 605 519 0.108 0.217 0.188 55.0 62.0 70.0 8655 11975 15315
400 687 574 575 490 696 597 0.097 0.193 0.167 60.5 66.5 80.0 10600 14610 20065
Ambient temp. 50 °C Table 7 OCIFLAM-FSA MULTI-CORE CABLES
Ground temp. 35 °C
Depth of laying in ground 0.5 Mtr.
Thermal resistivity of soil 1.2 K.m/W
Trefoil Touching
Ground temp. 35 °C
Depth of laying in ground 0.5 Mtr.
Thermal resistivity of soil 1.2 K.m/W
Trefoil Touching
Description: PLAIN ANNEALED COPPER CONDUCTORS, XLPE INSULATION, LSF BEDDING,GALVANISED STEEL WIRE
ARMOURED, LSF SHEATH
ELECTRICAL PROPERTIES MECHANICAL PROPERTIES
Imped- Volt Volt Typical overall
Current ratings Approximate mass
Cable ance drop drop diameter
size Ground Duct Air
mm2 2, 3 & 2c 3&4c
3& 3& 3& 2c 3c 4c 2c 3c 4c
2c 2c 2c 4c mV/ mV/
4c 4c 4c mm mm mm kg/km kg/km kg/km
Ω/km A/m A/m
A A A A A A
1.5 33 28 27 22 24 20 15.4 30.9 26.7 12.5 13.0 14.0 300 350 400
2.5 42 36 35 29 32 27 9.45 18.9 16.4 13.6 14.1 15.0 350 400 450
16 121 102 99 83 98 83 1.47 2.94 2.55 20.0 21.2 22.9 1280 1500 1785
25 157 131 127 107 128 109 0.933 1.87 1.616 20.0 23.7 25.4 1200 1755 2200
35 188 157 153 128 158 134 0.675 1.35 1.169 22.1 25.3 27.7 1655 2155 2675
50 223 187 181 152 190 163 0.502 1.00 0.869 24.6 27.5 30.9 1995 2635 3270
70 273 229 224 187 239 205 0.353 0.706 0.611 27.4 31.2 36.2 2535 3385 4610
95 328 274 269 226 295 253 0.260 0.520 0.450 31.2 35.9 39.8 3310 4470 5635
120 372 312 307 258 341 293 0.212 0.424 0.367 33.9 38.8 44.9 3930 5400 7365
150 417 349 345 291 389 335 0.178 0.356 0.308 37.0 43.8 49.0 4635 6855 8690
185 470 394 391 329 449 386 0.150 0.300 0.260 41.8 47.8 53.6 5930 8105 10500
240 544 455 453 380 530 456 0.124 0.248 0.215 45.5 52.7 59.3 7485 10180 13105
300 609 509 509 427 605 519 0.110 0.220 0.191 49.6 57.4 65.5 8920 12300 15745
400 687 574 575 490 696 597 0.098 0.196 0.170 55.1 65.0 73.5 10885 15005 20545
Ground temp. 35 °C
Depth of laying in ground 0.5 Mtr.
Thermal resistivity of soil 1.2 K.m/W
Trefoil Touching
general Information
Mode of operation Mechanical Construction
A silicon solar cell can be used as an The solar cell is embedded in Ethylen-
irradiance sensor, because the short-circuit Vinyl-Acetat (EVA) between glass and
current is proportional to the irradiance. Tedlar. The laminated cell is integrated into
Our sensors are build out of a monocrystal- a case of powder-coated aluminium.
line Si solar cell connected to a shunt. Due Therefore the sensor construction is com-
to the low resistance of the shunt the cell parable to that of a standard PV module.
operates next to short-circuit. The electrical connection is realized by a
To minimize influences of tempera- 3 m cable or a waterproof (IP67) connector.
ture to the measuring signal all of our
sensors with the extension „TC“ have an optional Temperature Measurement
active temperature compensation via a Additionally to the irradiance measure-
temperature sensor laminated to the ment our silicon sensors with the extension IngenIeurbüro
back surface of the solar cell. “-T” are able to measure the temperature of Mencke & Tegtmeyer GmbH
All sensors are calibrated in artifici- the solar cell using a temperature sensor
al sunlight against a reference cell cali- laminated to the back of the cell. This solar Schwarzer Weg 43A
brated at the Physikalisch-Technische cell temperature can approximately be 31789 Hameln
Germany
Bundesanstalt (PTB, National Metrology used as module temperature. Tel: +49 51 51 / 40 36 99 - 0
Institute of Germany). Fax: +49 51 51 / 40 36 99 - 19
email: info@ib-mut.de
http://www.ib-mut.de
SILICon IrrADIAnCe SenSor
Technical Data
SI-SenSor • Solar cell: Monocrystalline silicon (50 mm x 33 mm)
general Information • Operating temperature: -35°C to 80°C
• Electrical connection: 3 m shielded cable
• Load impedance for Si-V-1.5TC-batt: minimal 1 MΩ
• Load impedance for Si-V-1.5TC and -TC-T, Si-V-10TC and -TC-T: min. 10 kΩ
• Load impedance for Si-I-420TC and -TC-T: minimal 20 Ω and maximal 400 Ω
• Case, protection mode: Powder-coated aluminium, IP 65
• Dimension, weight: 155 mm x 85 mm x 39 mm, approx. 350 to 470 g
• Customs number for all sensors: 85 41 40 90
DIMenSIonS
InCIDenT
Incident Angle Modifier
AngLe
MoDIFIer
Angle
SPeCTrAL
Normalised Spectral
reSPonSe
Response
Wavelength in nm
SILICon IrrADIAnCe SenSor
Technical Data
Sensor Types:
Si-rS485TC-2T-v 24 VDC (12 bis 28 VDC) Yes M&T, MODBUS M&T, MODBUS
Irradiance, Cell Temperature typic 25 mA 0 to 1,500 W/m2 -40 to +90°C
Accessories: External Temperature,
Wind Speed
Si-V-1.5TC-T -35 to +70°C / -35 to +80°C 1.0 K / 1.1 K Ingenieurbüro Mencke & Tegtmeyer GmbH · Hameln · © Oktober 2019
eXTenD oF • Silicon sensor with shielded cable, 0.14 mm2, UV- and temperature resistant,
3m length and ferrules (except Si-V-1.5TC-batt)
Supply • Calibration protocol and quick reference guide
options • DaKKS calibration certificate
• Customized cable lengths
• Version with waterproof connector (Si-V-1.5TC-batt always with connector)
• Adaptation of spectral response to different PV materials
• Customised scaling or measuring range
SILICon IrrADIAnCe SenSor
option Connector
eLeCTrICAL The electrical connection of the Si sensor is realized with the inbuilt connector
and the suitable plug.
ConneCTIon
Technical Data of the Plug
optional Version with
Connectors • Cable dimensions (best / max.): 0.14 mm2 / 0.25 mm2 (AWG26 / AWG24)
• Diameter of cable: 3.5 … 5 mm
• Protection mode: IP67 in conjunction with the suitable connector
The connection of the different Silicon irradiance sensors are listed in the follo-
wing table. The pin numbers are printed at the inside of the plug. Please take care of
the mounting of the plugs as shown at the end of this page. Only if these mounting
steps are realised the plug meets IP67 when connected.
MounTIng
oF PLug
Tamb-Si
External Temperature Sensor for Si-RS485TC-2T-v
Mounting Advices
In case of outdoor installation avoid direct rain and sun contact on INOX steel tube.
Probably use sun respectively rain protection.
Security Advice
The installation and assembly of electrical equipment may only be performed by a skilled electrician.
The sensor must not be used in any relation with equipment that supports, directly or indirectly, human
health or life or with applications that can result in danger for people, animals or real value.
Ingenieurbüro Mencke & Tegtmeyer GmbH • Schwarzer Weg 43A • 31789 Hameln • Germany
Tel. +49-5151-403699-0 • Fax: +49-5151-403699-19 • www.ib-mut.de • info@ib-mut.de
Errors and changes excepted Date: May 2016 Page 1 of 1
EXPO 2020 DUBAI – FRANCE PAVILION
Project Ref.: EXPO 2020 DUBAI Rev. Date
Doc. Ref.: A 15/08/20
Communication Cable
PRODUCT INFORMATION
Screened data transmission cable mit PE core insulation, reinforced outer sheath and twisted pairs
UNITRONIC® Li2YCYv (TP): Low-capacitance screened PVC data cable, DIN 47100 coded Twisted PE pairs, Reinforced black
jacket/ Outdoor laying, RS422/ RS485 wiring
Info
Cables for RS485/RS422
Interference signals
Benefits
7-wire stranded conductor (UNITRONIC® Li2YCY (TP) and UNITRONIC® Li2YCYv (TP) can be used for Maxi TERMI-POINT®
wiring
Overall braid minimises electrical
interference
Decoupling of circuits by means of
twisted-pair (TP) design (crosstalk effects)
Application range
Particularly suitable for wiring data systems with transmission rates up to 10 Megabits per second, and is qualified for the
RS422 and RS485 interfaces.
For fixed and limited flexible installation
Can be used in dry or damp rooms
Signal-, control- and measuring cable,for transmission of low, sensitive signals and high bit rates
UNITRONIC®
Li2YCYv (TP) with its reinforced, nominal/ minimum average wall thickness of at least 1.8 mm of the black outer sheath (Yv) is
designed for indoor and outdoor use as well as for applications where a reinforced outer sheath may turn out to be
advantageous
Product features
Flame-retardant according IEC 60332-1-2
Product Make-up
7-wire bare stranded copper conductor
Core insulation made of polyethylene (PE)
TP structure
Tinned-copper braiding
Wall thickness of the outer sheath is increased ("Yv")
Outer sheath colour: black (RAL 9005)
Technical Data
Classification ETIM 5: ETIM 5.0 Class-ID: EC000104
ETIM 5.0 Class-Description: Control cable
Classification ETIM 6: ETIM 6.0 Class-ID: EC000104
ETIM 6.0 Class-Description: Control cable
Core identification code: DIN 47100, refer to Appendix T9
Mutual capacitance: At 800 Hz: max. 60 nF/km
Peak operating voltage: (not for power applications) 250 V
Inductivity: approx. 0.65 mH/km
Conductor stranding: Stranded conductor, based on VDE 0881, 7-wire
Minimum bending radius: Occasional flexing: 15 x outer diameter
Fixed installation: 6 x outer diameter
Short-range crosstalk attenuation: Up to 1 MHz min. 50 dB
Up to 10 MHz min. 40 dB
Test voltage: Core/core: 2000 V
Core/screen: 1000 V
Characteristic impedance: 100 ± 15 Ohm (> 1 MHz)
Temperature range: Occasional flexing: -5°C to +70°C
Fixed installation: -40°C to +80°C
Note
Unless specified otherwise, the shown product values are nominal values. Detailed values (e.g. tolerances) are available upon
request.
Copper price basis: EUR 150/100 kg. Refer to catalogue appendix T17 for the definition and calculation of copper-related
surcharges.
Please find our standard lengths at: www.lappkabel.de/en/cable-standardlengths
Packaging size: coil ≤ 30 kg or ≤ 250 m, otherwise drum
Please specify the preferred type of packaging (e.g. 1 x 500 m drum or 5 x 100 m coils).
Photographs and graphics are not to scale and do not represent detailed images of the respective products.
Prices are net prices without VAT and surcharges. Sale to business customers only.
conductor
UNITRONIC® Li2YCYv (TP) black for outdoor installation, 7-wire
0031350 2 x 2 x 0.22 8.1 24.2 79
0031351 3 x 2 x 0.22 8.7 28.6 93
0031352 4 x 2 x 0.22 8.9 34.2 100
0031353 8 x 2 x 0.22 10.7 70 156
0031354 10 x 2 x 0.22 12 76 185
0031365 1 x 2 x 0.34 7.4 20 69
0031355 2 x 2 x 0.34 9.3 34.1 102
0031356 3 x 2 x 0.34 10 43 117
0031357 4 x 2 x 0.34 10.3 52.8 130
0031358 8 x 2 x 0.34 12.6 85.8 206
0031366 1 x 2 x 0.5 7.9 29 79
0031360 2 x 2 x 0.5 10.1 37 120
0031361 3 x 2 x 0.5 10.9 55 142
0031362 4 x 2 x 0.5 11.2 60 160
0031363 8 x 2 x 0.5 13.9 113.3 251
0031364 10 x 2 x 0.5 16 148 303
PRODUCT INFORMATION
Powered by TCPDF (www.tcpdf.org)
EXPO 2020 DUBAI – FRANCE PAVILION
Project Ref.: EXPO 2020 DUBAI Rev. Date
Doc. Ref.: A 15/08/20
Cable Trays
H
Customer Service: Tel: 00971-4-3331988, Fax: 00971-4-3331989, E-mail: sales@powersolutionme.com, Website: www.powersolutionme.com
CONNECTORS
Customer Service: Tel: 00966-1-2422511, Fax: 00966-1-2445080, E-mail: sales@powersolutionme.com, Website: www.powersolutionme.com
HEAVY DUTY STRAIGHT FLANGE CONNECTORS
PHDT/ SC / FINISH
35
Customer Service: Tel: 00971-4-3331988, Fax: 00971-4-3331989, E-mail: sales@powersolutionme.com, Website: www.powersolutionme.com
CONNECTOR
Customer Service: Tel: 00966-1-2422511, Fax: 00966-1-2445080, E-mail: sales@powersolutionme.com, Website: www.powersolutionme.com
MEDIUM DUTY CONNECTORS
MDT/ SC / FINISH
11
25
Customer Service: Tel: 00971-4-3331988, Fax: 00971-4-3331989, E-mail: sales@powersolutionme.com, Website: www.powersolutionme.com
MDT / FC / Finish
Customer Service: Tel: 00966-1-2422511, Fax: 00966-1-2445080, E-mail: sales@powersolutionme.com, Website: www.powersolutionme.com
Customer Service: Tel: 00971-4-3331988, Fax: 00971-4-3331989, E-mail: sales@powersolutionme.com, Website: www.powersolutionme.com
Customer Service: Tel: 00966-1-2422511, Fax: 00966-1-2445080, E-mail: sales@powersolutionme.com, Website: www.powersolutionme.com
EXTRA HEAVY DUTY CONNERTORS
11
75
Customer Service: Tel: 00971-4-3331988, Fax: 00971-4-3331989, E-mail: sales@powersolutionme.com, Website: www.powersolutionme.com
CONNECTORS
XDT / FC / Finish
Customer Service: Tel: 00966-1-2422511, Fax : 00966-1-2445080, E-mail: sales@powersolutionme.com, Website: www.powersolutionme.com
Customer Service: Tel: 00971-4-3331988, Fax: 00971-4-3331989, E-mail: sales@powersolutionme.com, Website: www.powersolutionme.com
Customer Service: Tel: 00966-1-2422511, Fax: 00966-1-2445080, E-mail: sales@powersolutionme.com, Website: www.powersolutionme.com
Customer Service: Tel: 00971-4-3331988, Fax: 00971-4-3331989, E-mail: sales@powersolutionme.com, Website: www.powersolutionme.com
Customer Service: Tel: 00966-1-2422511, Fax: 00966-1-2445080, E-mail: sales@powersolutionme.com, Website: www.powersolutionme.com
EDITION 2009
Customer Service: Tel: 00971-4-3331988, Fax: 00971-4-3331989, E-mail: sales@powersolutionme.com, Website: www.powersolutionme.com
LDT - ELBOW HORIZONTAL - 30˚ / 45˚ / 60˚ / 90˚
LDT - ELBOW HORIZONTAL LDT - CROSS HORIZONTAL LDT / UEHR / W1/ W2 / ANGLE / FINISH
LDT - EXTERNAL RISER LDT - INTERNAL RISER LDT / UCHR / W1/ W2 / W3/ W4 / FINISH
Customer Service: Tel: 00966-1-2422511, Fax: 00966-1-2445080, E-mail: sales@powersolutionme.com, Website: www.powersolutionme.com 17
MDT - ELBOW HORIZONTAL 30˚ / 45˚ / 60˚ / 90˚
MDT / EHR / WIDTH / ANGLE / FINISH
18 Customer Service: Tel: 00971-4-3331988, Fax: 00971-4-3331989, E-mail: sales@powersolutionme.com, Website: www.powersolutionme.com
XDT - ELBOW HORIZONTAL 30˚ / 45˚ / 60˚ / 90˚
XDT / EHR / WIDTH / ANGLE / FINISH
XDT - TEE HORIZONTAL XDT - UN EQUAL TEE XDT - INTERNAL RISER - 30˚ / 45˚ / 60˚ / 90˚
HORIZONTAL XDT / IRR / WIDTH / ANGLE / FINISH
EDITION 2009
Customer Service: Tel: 00966-1-2422511, Fax: 00966-1-2445080, E-mail: sales@powersolutionme.com, Website: www.powersolutionme.com 19
EXPO 2020 DUBAI – FRANCE PAVILION
Project Ref.: EXPO 2020 DUBAI Rev. Date
Doc. Ref.: A 16/08/20
3.Test Reports
EXPO 2020 DUBAI – FRANCE PAVILION
Project Ref.: EXPO 2020 DUBAI Rev. Date
Doc. Ref.: A 15/08/20
N° RA19-0209
Selon l’Arrêté du 14 février 2003 modifié relatif à la performance des toitures et couvertures de toitures
exposées à un incendie extérieure
Laboratoire pilote agréé par le ministère de l’intérieur (Arrêté du 5 février 1959 modifié)
According to the modified Ordinance dated February 14th, 2003 as regards the performance of roofs exposed to external fire
Pilot laboratory approved by the Ministry of the Interior (Ordinance of February 5th, 1959 modified)
Ce rapport de classement atteste uniquement des caractéristiques de l’objet soumis aux essais et ne préjuge pas
des caractéristiques de produits similaires. Il ne constitue pas une certification de produits au sens du code de la
consommation. Seul le rapport électronique signé avec un certificat numérique valide fait foi en cas de litige. Ce
rapport électronique est conservé au CSTB pendant une durée minimale de 10 ans. La reproduction de ce rapport
électronique n'est autorisée que sous sa forme intégrale. Seule la version française fait foi. Il comporte 6 pages.
This classification report certifies only the characteristics of the object submitted for testing but does not prejudge the
characteristics of similar products. So it does not constitute a product certification in the sense of the Consumer Code. Only the
electronic report signed with a valid digital certificate is taken in the event of litigation. The electronic report is kept at CSTB for a
minimum period of 10 years. The reproduction of this electronic report is only authorized in its integral form. Only the French
version is authentic. It comprises 6 pages.
1. Introduction / Introduction
Ce rapport de classement définit le classement attribué au(x) produit(s) précité(s) conformément aux procédures
données dans la norme NF EN 13501-5:2016, au protocole CECMI du 6 mars 2012.
This classification report defines the classification assigned to the above-mentioned product(s) in accordance with the procedures
given in the NF EN 13501-5:2016 standard, the protocol CECMI of 6 March 2012.
Couche 1 / Layer 1 Couche 2 / Layer 2 Couche 3 / Layer 3 Couche 4 (externe) / Layer 4 (external)
Référence / Reference IBR Revêtu Kraft DELTA®-VENT S SUNSTYLE ALUCOBOND PLUS ALBARINO T *
Fabricant
ISOVER DORKEN SUNSTYLE International 3A Composite Saint Gobain
Manufacturer
3 couches
Laine de verre Couche supérieure : verre Tôle métalique et polymère OU Verre trempé
Composition polypropylène
Glass wool Superior layer: glass Metal sheet and polymer Heat tempered glass
3 polypropylene layers /
OR
Verre supérieur / superior glass:
Epaisseur / Thickness 100 et / and 300 mm 0,2 mm 6 mm 6 mm
6 mm
Masse surfacique
Weight per unit area
11 kg/m3 150 g/m² / / /
Masse volumique
Density
Ignifugation (Oui/Non)
Non / No Non / No Non / No Non / No
Fire-retarding (Yes/No)
Fixations
Mécanique sur
(type et nombre) Pièces mécaniques en EPDM et INOX
Sans / Without chevrons
Fixings Mechanical parts in EPDM and INOX
Mechanical on rafters
(type and number)
Classement Réaction OU
au feu / Reaction to fire F F / B-s1, d0 / /
classification OR
* ALUCOBOND PLUS peut être remplacé par le produit ALBARINO T en verre trempé de 6 mm.
ALUCOBOND PLUS can be replaced by LABARINO T product in 6 mm thick heat-tempered glass.
La description complète du produit figure dans le rapport d’essai.
The complete description of the product is given in the test report.
Direction
Division
Paramètres
Parameters Classe Classe Classe Classe Classe Classe
Class Class Class Essai Essai Essai Class Class Class
Test Test Test
Broof Croof Droof Broof Croof Droof
1 2 3
(t3) (t3) (t3) (t3) (t3) (t3)
Temps de
propagation
extérieure du
≥30 min ≥10 min N.a. ≥30 min ≥30 min ≥30 min Oui /Yes Oui /Yes N.a.
feu
External fire
spread time (TE)
Temps de
pénétration du
feu ≥30 min ≥15 min ≥ 5 min ≥30 min ≥30 min ≥30 min Oui /Yes Oui /Yes Oui /Yes
Time to fire
penetration (TP)
Gamme de pente
Entre 10° et 70° (from 10° to 70°)
Slope range
Support / Substrate
5. Limitations / Limitations
Le présent document de classement n’est pas une approbation ni une certification de type du produit.
The present document does not represent type approval or certification of the product.
Le classement attribué au produit dans le présent rapport est approprié pour une déclaration de performance du
fabricant dans le cadre d'une attestation de conformité du système 3 et pour le marquage CE dans le cadre du
Règlement européen sur les Produits de Construction (règlement UE n° 305/2011).
Le laboratoire d’essai n’a, par conséquent, joué aucun rôle dans l'échantillonnage du produit pour l’essai, bien qu’il
conserve les références appropriées, fournies par le fabricant pour assurer la traçabilité des échantillons soumis
à essai.
The classification assigned to the product in this report is appropriate to a declaration of performance by the manufacturer
within the context of system 3 attestation of conformity and CE marking under the European Construction Products
Regulation (regulation UE no. 305/2011).
The test laboratory has, therefore, played no part in sampling the product for the test, although it holds appropriate
references, supplied by the manufacturer, to provide for traceability of the samples tested.
Le Chef de Division
Etudes et Essais Feu
Head of Fire Studies and Tests Division
Martial BONHOMME
1. INTRODUCTION / INTRODUCTION
Le présent rapport de classement définit le classement attribué à «Tuile noire et tuile colorée photovoltaïque
Sunstyle : M65, M90 et M115» conformément aux modes opératoires donnés dans l’EN 13501-1:2007 +
A1:2009.
This classification report defines the classification assigned to «Tuile noire et tuile colorée photovoltaïque
Sunstyle : M65, M90 et M115» in accordance with the procedures given in EN 13501-1:2007 + A1:2009.
Provided the Ordinance from the Ministry of the interior, November 21, 2002 modified
Laboratory approved by the Ministry of the Interior (Ordinance of February 5, 1959, modified)
Seule la version française fait foi
Only the French version is legally acceptable
Nom du produit : Tuile noire et tuile colorée photovoltaïque Sunstyle : M65, M90 et
Product name: M115.
Numéro d’émission : 1
Issue number:
Ce rapport de classement comprend cinq pages et ne peut être utilisé ou reproduit que dans son
intégralité.
This classification report consists of five pages and may only be used or reproduced in its entirety.
Description du produit
Product description
Référence commerciale
Tuile noire et tuile colorée photovoltaïque Sunstyle : M65, M90 et
Trade mark
M115.
Composition Tuile photovoltaïque en verre trempé avec complexe laminé au dos
Composition constitué de (depuis l'extérieur vers l'intérieur):
- Un verre de référence « SECURIT ALBARINO T » d'épaisseur 6
mm et de masse surfacique 15 kg/m².
- Une feuille en éthylène acétate de vinyle (EVA) d'épaisseur 0,46
3
mm et de densité 0,96 g/ cm .
- Des cellules photovoltaïques de référence « NS6WL » de (180 ±
30) µm d'épaisseur et masse surfacique 0,04 g/cm² (environ 10 g
par cellule).
- Une feuille en éthylène acétate de vinyle (EVA) d'épaisseur 0,46
3
mm et de densité 0,96 g/ cm .
- Un isolant multicouches référencé « AKALIGHT ECS 385 b » de
masse surfacique 380 g/m².
- Un isolant multicouche référencé « AKASOL IL B » de masse
surfacique 185 g/m²
Page 2 sur 5
RAPPORT DE CLASSEMENT
EFR-19-004029 CLASSIFICATION REPORT
Résultats
Méthode d’essai Nombre Results
et numéro d’essais Paramètre continu –
Paramètre a) Conformité avec les
d’essai moyenne (m)
Parameter paramètres
Test method and No. Tests Continuous
test number
a) Compliance with
parameter - mean
parameters
(m)
LFS - Conforme
NF EN
Compliant
13823+A1 : 2015
3
EFR-19-SBI-
SMOGRA 5,3 -
004029
TSP 600s (m²) 57,4 -
Gouttelettes ou - Conforme
particules enflammées Compliant
Flaming droplets or
particles
Fs - Conforme
NF EN ISO 11925- Compliant
2 : 2013
12
EFR-19-SF- Inflammation du - Conforme
004029 papier filtre Compliant
Filter paper
Page 3 sur 5
RAPPORT DE CLASSEMENT
EFR-19-004029 CLASSIFICATION REPORT
s2
d0
Le format du classement de réaction au feu pour les produits de construction, à l'exception des revêtements
de sol et des produits d’isolation thermique pour conduites linéaires est :
The format of the reaction to fire classification for construction products excluding floorings and linear pipe
thermal insulation products is :
B - s 2 , d 0
c’est-à-dire, B-s2, d0
i.e. B-s2, d0
Page 4 sur 5
RAPPORT DE CLASSEMENT
EFR-19-004029 CLASSIFICATION REPORT
D’après la norme NF EN 13238 : 2012, le classement est valable pour les conditions d’utilisation finale
suivantes :
According to the standard NF EN 13238: 2012 , the classification is valid for the following end use
applications:
- Valable fixé mécaniquement sur des lattes en bois d'épaisseur ≥ 40 mm ou de lattes métalliques
d'épaisseur ≥ 40 mm.
- Valid fixed mechanically to wooden slats with a thickness of ≥ 40 mm or with metal slats with a thickness ≥
40 mm.
5. LIMITATIONS / LIMITATIONS
Le présent document de classement n’est pas une approbation ni une certification de type du produit.
This classification document does not represent type approval or certification of the product.
21/01/2020 21/01/2020
X X
Ingénieur Chargé d'affaire Chef du Service Essais "Réaction au Feu"
Signé par : Beatriz DE LA FUENTE Signé par : Pierre-Olivier WILLAY
Page 5 sur 5
Business Stream Products
Business Field Solar
Declaration
Project no. 21248257
Herewith it is declared, that the above noted module type has successfully passed the
test acc. to the above mentioned standard.
The test was performed using the following parameters:
Blowing sand concentration: 2.2 g/m³ ± 0.5 g/m³
Test temperature: 63 °C ± 2 °C
Mean particle size: 380 µm, SiO2 amount: > 95 %
Wind velocity: 18 m/s ± 2 m/s
Irradiation area: 400 mm x 400 mm
Duration of test: 4 hours (120 minutes per exposed side)
Module orientation: vertical, 90° to the sand beam.
The test results are documented in the following test report and are only valid for the
material as listed in the CDF for the above mentioned module type.
Report: 21248257.001
Managing Director
Dirk Fenske
Grid-Tied Inverter
EXPO 2020 DUBAI – FRANCE PAVILION
Project Ref.: EXPO 2020 DUBAI Rev. Date
Doc. Ref.: A 15/08/20
DC Cables
Produkte
Products
Manufacturer:
POLYCAB WIRES PVT LTD (UNIT 3)
NO. 12P2, 13,15 to 26A&B, 30-34/1-4,
65, 109, RAMPURA & NOORPURA,
TA:HALOL, DIST: PANCHMAHALS,
GUJARAT-389350 INDIA
Licence Holder:
POLYCAB WIRES PVT LTD
POLYCAB HOUSE, 1ST FLOOR,
771, PANDIT SATWALEKAR MARG
MAHIM(WEST), MUMBAI-400016
INDIA
Sonstiges / others :
All tests according to EN 50618:2014 except test ref.no. 1.4 in table B.1 in this report performed to the
complete cable H1Z2Z2-K 1X2.5mm2 black insulation and black sheath, H1Z2Z2-K 1X2.5 mm2 red insulation
and black & red strip sheath with 300m.Test ref. No. 1.4.1 in table B.1 is performed seperately to H1Z2Z2-K
1X16.0mm2 black insulation and black sheath & H1Z2Z2-K 1X16.0mm2 red insulation and black & red strip
sheath with 100m each.
Test reference number 1.1, 1.2, 1.3, 1.4, 1.5, 1.6, 2.1, 2.2, 2.3, 2.4, 2.5, 2.6 and 15 in table 2 were performed
to the complete cable H1Z2Z2-K 1X4.0mm2 black insulation and black sheath and 1X6mm 2 red insulation
and black & red strip sheath with 30m of each.
All tests according to EN 50618:2014 in this report were performed to the complete cable H1Z2Z2-K
1X16mm2 black insulation and black sheath with 100m.
Place of Testing:
Rev.:01
Report reference No.: 19600266 001
page 3 of 22
EN50618:2014
Clause Requirement --- Test Result - Remark Verdict
Characteristic of cable
Code designation …………………: “H1Z2Z2-K” Solar cable
Trademark ...................................... : POLYCAB
5.0 CONSTRUCTION
5.1 Conductor P
Number of cores: One P
Single wires are of copper and tinned: Tinned copper P
Compliance with class 5 acc. to IEC 60228 SEE TABLE 1.1 P
Separation layer of halogen free material No such material used for N/A
separation
There is no visible gaps in the continuous layer, No visible gaps P
when examined with normal or corrected vision
5.2 Insulation P
Insulation of halogen free material E-beam cross linkable low P
smoke zero halogen compound
Number of layers of insulation One P
Insulation extruded, solid and homogeneous Complies P
Possible to remove without damage to itself, to Complies P
the conductor or to the tin coating
Insulation is smooth, consistently applied largely Complies P
circular
Separation layer of halogen free material No such material used for N/A
separation
5.3 Sheath P
Sheath of halogen free material E-beam cross linkable low P
smoke zero halogen compound
Number of layers of sheath One P
Sheath extruded, smooth and consistently applied Complies P
Outer diameter is within the limits specified by SEE TABLE 4.3.5 P
manufacturer
Each single-core cable in a multiple construction No such construction N/A
pass the requirements of this document.
Each additional component in a multiple No such construction N/A
construction pass the requirements of this
document.
6.0 Cables are marked with P
a) Trademark POLYCAB P
b) Code designation “H1Z2Z2-K” P
c) Rated diameter in mm² 1.5…25mm2 P
6.5 Spacing between the end of marking and the Measured average value: P
begin of the following identical marking does not 410.0mm
exceed 550mm
6.6 The name CENELEC, in full or abbreviated, does Not applicable N/A
not be marked on, or in, the cables
6.7 Marking is still legible after test of cl. 5.1 of EN Complies, legibility tested by P
50396 rubbing 10 times with soaked
cloth
Report reference No.: 19600266 001
page 6 of 22
EN50618:2014
Clause Requirement --- Test Result - Remark Verdict
2.5 mm² P
Black
insulation 1.5×1010
and black
sheath
2.5 mm² P
Red
insulation 109 2.1×1012
and black &
red strip
sheath
4.0 mm² P
Black
insulation 3.3×1011
and black
sheath
6.0 mm² P
Red
insulation 1.0×1010
and black &
red strip
sheath
16.0 mm² P
Black
insulation 6.7×1010
and black
sheath
Report reference No.: 19600238 001 page 14 of 21
EN50618:2014
Clause Requirement --- Test Result --- Remark Verdict
Table 4.1 MECHANICAL CHARACTERISTICS of 2.5 mm2 Black insulation P
and black sheath sample
Samples of insulation ...................................... test plate sleeve probe -
Samples of sheath ........................................... test plate sleeve probe -
INSULATION
Values of tensile strength N/mm²: Median Variation %
N/mm²
Before ageing 14.14 18.14 14.73 15.45 14.37 14.7
After ageing in oven 14.45 15.23 15.84 15.41 15.47 15.4 4.8
After damp heat test 11.81 11.38 11.27 11.81 11.35 11.4 -22.4
After Compatibility test 11.94 10.43 11.63 11.68 10.98 11.6 -21.1
Values of elongation at break: Median % Variation %
Before ageing 305 340 315 300 265 305
After ageing in oven 275 325 325 310 310 310 1.6
After damp heat test 240 275 260 240 250 250 -18.0
After Compatibility test 345 270 295 300 270 295 -3.3
During cold elongation test Not applicable
SHEATH
Values of tensile strength N/mm²: Median Variation %
N/mm²
Before ageing 11.52 13.24 12.91 13.06 13.06 13.1
After ageing in oven 14.25 15.93 15.97 16.24 14.45 15.9 21.4
After damp heat test 10.35 11.43 11.32 9.42 10.02 10.4 -20.6
After storing in acid 14.27 18.90 10.83 12.54 12.22 12.5 -4.6
After storing in alkaline soln. 13.04 13.52 13.79 13.40 13.28 13.4 2.3
After Compatibility test 9.89 9.87 8.70 10.37 10.75 9.9 -24.4
Values of elongation at break: Median % Variation %
Before ageing 265 210 220 200 200 210
After ageing in oven 250 250 205 210 200 210 0.0
After damp heat test 200 225 200 200 200 200 -4.8
After storing in acid 245 220 200 235 215 220 4.8
After storing in alkaline soln. 230 205 200 235 160 205 -2.4
After Compatibility test 205 220 205 200 200 205 -2.4
During cold elongation test Not applicable
Report reference No.: 19600266 001
page 15 of 22
EN50618:2014
Clause Requirement --- Test Result - Remark Verdict
Black
insulation
and black Insulation 165.0 57.7 2.95
sheath
Report reference No.: 19600266 001
page 19 of 22
EN50618:2014
Clause Requirement --- Test Result - Remark Verdict
Values of measured wall thickness not less than stated in clause Average Minimum Smallest
5.2.3 of this standard (smallest value shall be highlighted) Value thickness measured
[mm] [mm] of value not
insulation less than
[mm] tm ≥ 0.9ts-
0.1 mm
2.5 Black 0.82 0.77 0.74 0.74 0.81 0.87 0.8 0.7 0.53
mm² insulation
0.70 0.82 0.83 0.71 0.79 0.80
and black
sheath 0.78 0.81 0.77 0.84 0.83 0.79
Red 0.80 0.79 0.74 0.81 0.82 0.86 0.8 0.7 0.53
insulation
2.5
and black & 0.80 0.96 0.81 0.85 0.91 0.92
mm²
red strip
sheath 0.82 0.75 0.81 0.76 0.93 0.91
Black 0.82 0.75 0.91 0.83 0.86 0.82 0.8 0.7 0.53
4.0 insulation
and black 0.86 0.79 0.83 0.85 0.73 0.81
mm² sheath
0.82 0.90 0.85 0.86 0.78 0.83
Red 0.89 0.97 0.78 0.86 0.77 0.81 0.9 0.7 0.53
insulation
6.0 0.94 0.84 0.83 0.94 0.90 0.95
and black &
mm²
red strip
sheath 0.84 0.90 1.00 0.75 0.84 0.90
Black 1.10 0.85 1.02 1.02 1.02 1.00 1.0 0.7 0.53
16.0 insulation
and black 1.10 1.00 1.00 0.97 0.90 1.10
mm²
sheath
1.04 1.00 1.16 0.94 0.88 1.05
Report reference No.: 19600266 001
page 20 of 22
EN50618:2014
Clause Requirement --- Test Result - Remark Verdict
Values of measured wall thickness not less than stated in clause 5.2.3 Average Minimum Smallest
of this standard (smallest value shall be highlighted) Value thickness measured
[mm] [mm] of sheath value not
[mm] less than
tm ≥ 0.85ts-
0.1 mm
0.78 0.86 0.89 0.80 0.82 0.81 0.8 0.8 0.58
Black
2.5
insulation and 0.91 0.79 0.91 0.82 0.89 0.81
mm²
black sheath
0.83 0.89 0.82 0.87 0.90 0.87
2.5 Red insulation 0.98 0.88 0.75 0.79 1.00 1.00 0.9 0.8 0.58
mm² and black & 0.82 0.86 0.98 0.89 0.84 0.83
red strip
sheath
0.81 0.96 0.99 0.88 0.79 0.91
4.0 Black 1.04 0.90 0.92 0.98 0.84 1.07 0.9 0.8 0.58
insulation and
mm² black sheath 0.86 0.85 1.02 0.98 0.87 0.91
1.09 0.95 0.83 0.87 0.90 0.88
Red insulation 0.82 0.83 0.98 0.79 1.02 0.88 0.9 0.8 0.58
6.0 and black &
red strip 1.04 0.98 0.79 0.89 0.83 0.95
mm²
sheath
1.05 1.02 0.97 0.91 0.79 0.77
Black 1.06 1.07 0.96 0.90 1.02 1.06 1.0 0.9 0.66
16.0 insulation and
mm² black sheath 0.87 0.98 1.07 0.88 1.00 1.06
16.0 mm² Red insulation and black & red strip sheath
AC Cables
5. COMMON TESTS
As discussed earlier in this brochure, specific tests are done on OCIFLAM Cables so that they can meet the fire performance
standards. A detailed explanation of these tests follows below:
Different categories for single and bunched cables are covered with different standards. Table 1 shows the categories covered
by each standard. Cables are rated for specific categories depending on the tests passed, with adequate cables mounted
together in the test chamber in order to comply with the volume of combustible material per linear meter agrees to the stated
values in the category.
IEC 60332: Test for vertical flame propagation for a single insulated wire or a cable. Part 1 & 2 cable/ wire is subjected to a 1 KW
(Bunsen type) burner. Part 3 covers groups of cables subjected to a 20 kW burner. It has been divided into different parts, the
first is covering the apparatus and the others each covering the remaining categories.
BS EN 60332: This British Standard is identical IEC 60332 Standard and it supersedes BS EN 50265 & BS EN 50266.
Notes:
1. Accurate at date of publication
2. Type A – Apparatus, Type P - Procedure
3. Volume of combustible material per linear meter of the test setup
4. For information only – refer to the specification for details
During a fire, a halogenated polymer cable will emit halogen gasses which will react with the atmospheric moisture to form
corrosive halogen acids. These halogen acids will endanger human life by hindering breathing and eyesight. Further, it will
damage the equipment and building structure. Hence, three different tests are performed in OCI in order to determine the
quantity of those halogenated gasses emitted during a fire. Those tests and their required passing criteria are shown in the
below table:
In this test a sample of (750 ± 250) mg is placed inside a special glass tube fed with air flow from one side and resulting gasses
are drawn from the other side of the tube through three wash bottles. Then the amount of halogen gas that dissolved in the
water is measured as per the values in the above table.
For a cable to be regarded as a Halogen free all the requirement shown in the above table are required to be met.
IEC 60754: Tests on gasses emitted through combustion of materials from cables. The first part covers the method using
titration to measure the amount of gas released, while the second part covers the method required to measure the pH and
conductivity.
BS EN 60754: This standard replaces the older BS EN 50267, which was withdrawn. It is the same as IEC 60754
The laboratory equipment required to measure acid gas emission is shown below:
5.3.1 GENERAL
One of the most important aspects in the evaluation of the IEC 61034: Measurement of smoke density of electric cables
burning performance of cables is the smoke emission due burning under defined conditions. Part 1 covers the apparatus
to the fact that it affects directly the evacuation of people while part 2 covers the procedure. It is noted that the criteria
and accessibility of firefighting squad during a fire. Hence for passing should be given by the relative cable standard,
the importance of the Smoke Emission Test. however; the recommendation is that the light transmittance
should not be less than 60%.
In this test, a cable is burned horizontally and light
transmittance is measured in a defined cubic chamber BS EN 61034: This standard is the same as the IEC standard.
at atmospheric pressure to maintain standardization and
repeatability of the test. To avoid adding smoke from other
sources, the cable sample is burned using an alcohol flame 5.3.3 TYPICAL APPARATUS
as it has zero smoke emission.
150 mm
The photometric system comprises of a light source, lens system and a photocell receiver. This system is used to measure
the light transmittance through the smoke emitted by the cable when it is burned.
The strictest tests used in OCI for testing the OCIFLAM However, before we start with the test procedures of circuit
cables is the circuit integrity test.. These tests are applicable integrity, a brief of the cable classification will be explained as
to the British standard BS 6387 and IEC standard IEC 60331. below:
In addition to that, OCI’s cables are in accordance to BS 7846 5.4.2 CABLE CLASSIFICATION
which will be applied after the tests in BS 6387 have been
passed successfully. A cable is categorized by a series of letter symbols, indicating the
performance tests to which the cable complies. These categories
In case, the cable has passed all the above tests of BS 6387 are shown in the next table
successfully, another test will be applied which is BS 7846 to Resistance to Fire Alone
designate the cable to a specific category based on its fire
resistance characteristics. The categories divided in OCI as 950 ºC for 3 h C
follows: Resistance to Fire with Water
650 ºC for 15 min followed by a 15 min of water sprinkled W
• Category F2: Resistance to fire, resistance to fire with water, Resistance to Fire with Mechanical Shock
resistance to fire with mechanical shock, assed separately, when
tested in accordance with BS 7846 (CWZ protocols). 950 ºC for 15 min Z
• Category F120: Resistance to fire with direct mechanical To determine the category of the cable from the cable
marking, let’s assume the following categories:
impact and water jet assessed in combination, when tested in
accordance with BS 8491 for 120 min. • “CW”: in order to meet this category; the requirement for
the cable is to resist fire alone at 950 ˚C for 3 hours (C), and
The circuit integrity test shall be applied as well on wires, where resist fire with a 15 minutes spray of water (W)
the standard used is BS EN 50200 and the categories of the
wire will be divided as follows: • “CZ”: in order to meet this category; the requirement for
the cable is to resist fire alone at 950 ˚C for 3 hours (C), and
• Category PH30: Resistance to fire, resistance to fire with resist fire with mechanical shock for 15 minutes (Z)
water, resistance to fire with mechanical shock, assed separately,
when tested in accordance with BS EN 50200 • “CWZ”: the requirement for the cable to meet this
requirement is to resist fire alone at 950 ˚C for 3 hours (C),
• Category PH120: Resistance to fire with direct mechanical resist fire with a 15 minutes spray of water (W), and resist fire
with mechanical shock for 15 minutes (Z)
impact and water jet assessed in combination, when tested in
accordance with BS EN 50200 for 120 min.
In this a test, a cable is mounted horizontally on a cable supporting apparatus (shown below), and a temperature controlled
flame is applied on it for a duration of time.
The flame temperature used and the duration of the test shall be selected
950 ± 40˚C for 3 hours
1. Burner
2. Cable Sample
3. Earthed Metallic Support
The test cable is connected in a certain arrangement to check the continuity of the operation during a fire (as shown above).
The circuit integrity is monitored through lamps and fuses.
For the cable to preserve the circuit integrity characteristics; the following conditions shall be applied:
i. The voltage is maintained, i.e. no fuse fails or circuit breaker is interrupted
ii. The conductor does not rapture, i.e. the lamp is not extinguished
During the test a current is passed through all cores of the cable as provided by a suitable transformer arrangement. The
transformer capacity must be able to maintain the test voltage up to a maximum leakage current of 3 A.
In this test the temperature of the flame is 650 +/- 40˚C, and after 15 minutes of burning the water is turned on and the test
continues for another 15 minutes with both flame and water applied.
The cable is mounted on the supporting apparatus with the water sprinkler (shown opposite).
The cable shall maintain its circuit integrity for the duration of the test.
Circuit integrity test (Resistance to Fire with Mechanical Shock: Protocol Z of BS 6387)
In this test the cable is mounted on vertical wall above a gas burner, and is connected to the circuit integrity monitoring
equipment (as shown above). The flame temperature shall be 950 +/- 40˚C. During the test, a shock producing device drops
under its own weight every 30 seconds, and strikes at the midpoint of the mounted cable.
The cable shall maintain its circuit integrity for the duration of the test.
Circuit Integrity (Resistance to fire with direct mechanical impact and water jet as per BS 8491)
In this part, three different tests are combined together to assess the circuit integrity of the cable. The cable is mounted in a U shaped
formation on a test ladder (as shown above). The test will start by applying the flames, then an impact from the impact device that
shall be applied every 10 minutes during the duration of the test. Toward the end of the test, specifically, before 5 min of the end, a
water jet device shall apply a burst of water for 5 seconds duration that will be repeated 5 times (one burst every 60 seconds for 5
minutes duration).
The cable shall maintain its circuit integrity for the duration of the test.
Legal Type Limited Liability Company(LLC) ذات مسئولية محدودة الشكل القانونى
Expiry Date 01/10/2020 تاريخ النتهاء Issue Date 02/10/2018 تاريخ الصدار
D&B D-U-N-S ® No 0 الرقم العالمي Main License No. 815716 رقم الرخصة الم
Register No. 1366712 رقم السجل التجارى DCCI No. 309666 عضوية الغرفة
Remarks / الملحظات
Print Date 15/09/2019 15:01 تاريخ الطباعة Receipt No. 13308848 رقم اليصال
.اتصالت( للحصول على اذن الدفع/ )دو6969 أرسل رقم الرخصة إلى،يمكنك الن تجديد رخصتك التجارية من خلل الرسائل النصية القصيرة
Now you can renew your trade license by sending a text message (SMS). Send your trade license number to 6969 (Du/ Etisalat) to receive payment
www.dubaided.gov.ae لمراجعة صحة البيانات الواردة في الرخصة برجاء زيارة الموقع. وثيقة إلكترونية معتمدة وصادرة بدون توقيع من دائرة التنمية القتصادية
Approved electronic document issued without signature by the Department of Economic Development. To verify the license kindly visit
www.dubaided.gov.ae
ملحق الشركاء
Partners
License Details / تفاصيل الرخصة
Print Date 15/09/2019 15:01 تاريخ الطباعة Receipt No. 13308848 رقم اليصال
.اتصالت( للحصول على اذن الدفع/ )دو6969 أرسل رقم الرخصة إلى،يمكنك الن تجديد رخصتك التجارية من خلل الرسائل النصية القصيرة
Now you can renew your trade license by sending a text message (SMS). Send your trade license number to 6969 (Du/ Etisalat) to receive payment
www.dubaided.gov.ae لمراجعة صحة البيانات الواردة في الرخصة برجاء زيارة الموقع. وثيقة إلكترونية معتمدة وصادرة بدون توقيع من دائرة التنمية القتصادية
Approved electronic document issued without signature by the Department of Economic Development. To verify the license kindly visit
www.dubaided.gov.ae
شهادة شهر قيد شركة فى السجل التجارى
Commercial Register
تفاصيل القــيد Register Details /
Main Lice. Nr 815716 Register No.رقم الرخصة الم 1366712 رقم القيد
Company Name امبيريال روبي لتركيب أجهزة الطاقة الشمسية وإصلحها ش.ذ.م.م
EMPEREAL RUBY SOLAR ENERGY SYSTEMS INSTALLATION L.L.C
Legal Type )Limited Liability Company(LLC ذات مسئولية محدودة الشكل القانونى
Print Date 15/09/2019 15:01 تاريخ الطباعة Receipt No. 13308848 رقم اليصال
يمكنك الن تجديد رخصتك التجارية من خلل الرسائل النصية القصيرة ،أرسل رقم الرخصة إلى ) 6969دو/اتصالت( للحصول على اذن الدفع.
Now you can renew your trade license by sending a text message (SMS). Send your trade license number to 6969 (Du/ Etisalat) to receive payment
وثيقة إلكترونية معتمدة وصادرة بدون توقيع من دائرة التنمية القتصادية .لمراجعة صحة البيانات الواردة في الرخصة برجاء زيارة الموقع www.dubaided.gov.ae
Approved electronic document issued without signature by the Department of Economic Development. To verify the license kindly visit
www.dubaided.gov.ae
License no. 815716 815716 رقم الرخصة
Trade Name EMPEREAL RUBY SOLAR امبيريال روبي لتركيب أجهزة الطاقة الشمسية السم التجاري
ENERGY SYSTEMS م.م.ذ.وإصلحها ش
INSTALLATION L.L.C
Legal Status Limited Liability Company(LLC) ذات مسئولية محدودة الشكل القانوني
Activity Solar Energy Systems Installation تركيب أجهزة الطاقة الشمسية وإصلحها نوع النشاط
Valid in DMCC Freezone only, subject to the terms of Lease/Property مع مراعاة أنظمة،صالحة في المنطقة الحرة التابعة لمركز دبي للسلع المتعددة فقط
Ownership and regulations of DMCC Authority. This document has been . تملك العقارات/سلطة مركز دبي للسلع المتعددة وشروط استئجار
electronically generated by DMCC Authority and requires no signature. To تم استخراج هذه الوثيقة إلكترونيا من قبل سلطة مركز دبي للسلع المتعددة وال
verify the content and authenticity of this document visit www.dmcc.ae/document_verification يرجى زيارة الموقع.تحتاج إلى توقيع
www.dmcc.ae/document_verification and enter the eDocument Verification .وادخال الرقم اإللكتروني للتحقق من محتوى وصحة هذه الوثيقة
no.
eDocument Verification no:838313396402 :رقم التحقق من الوثيقة اإللكترونية Document Generation Date:31/10/2019:تاريخ استخراج الوثيقة
رخصة مهنية
Professional License
License Details / تفاصيل الرخصة
License No. 562192 رقم الرخصة
Legal Type Limited Liability Company(LLC) ذات مسئولية محدودة الشكل القانونى
Expiry Date 09/10/2020 تاريخ النتهاء Issue Date 10/10/2004 تاريخ الصدار
D&B D-U-N-S ® 561228938 الرقم العالمي Main License No. 562192 رقم الرخصة الم
No.
Register No. 70318 رقم السجل التجارى DCCI No. 91609 عضوية الغرفة
Manager / مدير India / الهند امجد سالي بن قادر محمد سالي 187589
AMJAD SALI KHADER MOHAMMED
SALI
Manager / مدير India / الهند انيس صمد عبدللطيف عبدالصمد 438874
ANEES SAMAD ABDUL LATHEEF
ABDUL SAMAD
Remarks / الملحظات
Print Date 04/08/2020 11:03 تاريخ الطباعة Receipt No. 0 رقم اليصال
.اتصالت( للحصول على اذن الدفع/ )دو6969 أرسل رقم الرخصة إلى،يمكنك الن تجديد رخصتك التجارية من خلل الرسائل النصية القصيرة
Now you can renew your trade license by sending a text message (SMS). Send your trade license number to 6969
(Du/ Etisalat) to receive payment voucher.
www.dubaided.gov.ae لمراجعة صحة البيانات الواردة في الرخصة برجاء زيارة الموقع. وثيقة إلكترونية معتمدة وصادرة بدون توقيع من دائرة التنمية القتصادية
Approved electronic document issued without signature by the Department of Economic Development. To verify the
license kindly visit www.dubaided.gov.ae
ملحق الشركاء
Partners
License Details / تفاصيل الرخصة
Print Date 04/08/2020 11:03 تاريخ الطباعة Receipt No. 0 رقم اليصال
.اتصالت( للحصول على اذن الدفع/ )دو6969 أرسل رقم الرخصة إلى،يمكنك الن تجديد رخصتك التجارية من خلل الرسائل النصية القصيرة
Now you can renew your trade license by sending a text message (SMS). Send your trade license number to 6969
(Du/ Etisalat) to receive payment voucher.
www.dubaided.gov.ae لمراجعة صحة البيانات الواردة في الرخصة برجاء زيارة الموقع. وثيقة إلكترونية معتمدة وصادرة بدون توقيع من دائرة التنمية القتصادية
Approved electronic document issued without signature by the Department of Economic Development. To verify the
license kindly visit www.dubaided.gov.ae
شهادة شهر قيد شركة فى السجل التجارى
Commercial Register
تفاصيل القــيد Register Details /
Main Lice. Nr 562192 Register No.رقم الرخصة الم 70318 رقم القيد
مستودع رقم 2ملك روضة للعقارات )عبد الرحيم احمد محمد المري(-ديرة القصيص
Print Date 04/08/2020 11:03 تاريخ الطباعة Receipt No. 0 رقم اليصال
يمكنك الن تجديد رخصتك التجارية من خلل الرسائل النصية القصيرة ،أرسل رقم الرخصة إلى ) 6969دو/اتصالت( للحصول على اذن الدفع.
Now you can renew your trade license by sending a text message (SMS). Send your trade license number to 6969
(Du/ Etisalat) to receive payment voucher.
وثيقة إلكترونية معتمدة وصادرة بدون توقيع من دائرة التنمية القتصادية .لمراجعة صحة البيانات الواردة في الرخصة برجاء زيارة الموقع www.dubaided.gov.ae
Approved electronic document issued without signature by the Department of Economic Development. To verify the
license kindly visit www.dubaided.gov.ae
Register Activities / أنشطة السجل
Fire Retardant Lining Materials Installation تركيب المواد المبطنة والمانعة لنتشار الحريق
Plumbing & Sanitary Contracting اعمال التمديدات والتركيبات الصحية
Floor and wall Tiling Works اعمال تبليط الرضيات والحوائط
Painting Contracting اعمال الصباغ والدهانات
Carpentry & Flooring Contracting اعمال النجارة وتركيب الرضيات
Engraving & Ornamentation Works اعمال النقش والزخرفة
Wall Paper Fixing تركيب ورق الجدران
False Ceiling & Light Partitions Installation تركيب السقف المعلقة و القواطع الخفيفة
Electrical Fittings & Fixtures Services اصلح التمديدات والتركيبات الكهربائية
Sanitary Installation & Pipes Repairing اصلح التمديدات والتركيبات الصحية وتمديدات المياه
Plaster Works اعمال البلستر
Electrical Fitting Contracting اعمال التمديدات الكهربائية
Solar Energy Systems Installation تركيب أجهزة الطاقة الشمسية وإصلحها
Print Date 04/08/2020 11:03 تاريخ الطباعة Receipt No. 0 رقم اليصال
.اتصالت( للحصول على اذن الدفع/ )دو6969 أرسل رقم الرخصة إلى،يمكنك الن تجديد رخصتك التجارية من خلل الرسائل النصية القصيرة
Now you can renew your trade license by sending a text message (SMS). Send your trade license number to 6969
(Du/ Etisalat) to receive payment voucher.
www.dubaided.gov.ae لمراجعة صحة البيانات الواردة في الرخصة برجاء زيارة الموقع. وثيقة إلكترونية معتمدة وصادرة بدون توقيع من دائرة التنمية القتصادية
Approved electronic document issued without signature by the Department of Economic Development. To verify the
license kindly visit www.dubaided.gov.ae
EXPO 2020 DUBAI – FRANCE PAVILION
Project Ref.: EXPO 2020 DUBAI Rev. Date
Doc. Ref.: A 16/08/20
5.ISO Certificates
CERTIFICATE
DQS Holding GmbH has issued an IQNet recognized certificate that the organization
Scope:
The Occupaitonal Health & Safety activities and supporting processes associated with the Design and Manufacture of
PVC and XLPE compound.
The Occupational Health & Safety activities and supporting processes associated with the manufacture of
Conductors, Wires and Cables.
Through an audit, documented in a report, it was verified that the management system
fulfills the requirements of the following standard:
20006921 Polycab India Limited (Unit -I & II) The Occupational Health & Safety
74/8-9, 38/1-6, 41/4-9, 42/1-2, 43/1-3 44/1-3, 45/1-2, Activities and supporting processes
46/5,6,8 associated with Manufacture of
Daman Industrial Estate PVC/XLPE/ Elastomer Wires and
Village - Kadaiya Cables, Extra High, High, Medium and
Daman - 396 210 Low Voltage Power Cables, Rigid &
INDIA Flexible Wires, Cables for Fire
Resistant, Fire Survival, Zero Halogen,
Flame Retardant, Low Smoke Cables
& DC Solar Cables for Industrial,
Domestic and Appliance, Applications,
Grafted Polyethylene to make
crosslinked PE, Jelly filled cables,
Railway Dry & Jelly Filled Quad
Cables, Railway Signaling cable,
Power and Indoor Cables.
20005501 Polycab India Limited (Unit III) The Occupational Health & Safety
96/1-7,100,2-6, Activities and supporting processes
Daman Industrial Estate, associated with the Manufacture of
Village – Kadaiya PVC, XLPE, PE, EPR LT Power &
Daman - 396 210 Control Elastomeric Cables, Low,
INDIA Medium voltage Power & Control
Cables, Low Voltage Instrumentation
Cables, Telecommunication Cables,
Fire Survival Cables, Solar Cables,
Thermocouple Cables and RS-485
Cables. Railway Signaling, Power and
Indoor Cables.
20005063 Polycab India Limited (U4) The Occupational Health & Safety
Survey No. 67-72, 105, 106 Activities and supporting processes
Noorpura, District Panchmahal associated with the Manufacture of
Halol - 389 350 PVC, XLPE & Elastomeric Extra High
Gujarat Voltage, High Voltage, Medium Voltage
INDIA Power Cables.
20006770 Polycab India Limited (UH2 & UH2A) The Occupational Health & Safety
Plot No. 30, 31, 34, 42/1, 65/1 Activities and supporting processes
Rameshra Road, Baska associated with the Manufacture of
District Panchmahal - 389 350 PVC,XLPE & Elastomer Cables,
Gujarat Medium, Low Voltage Power & Control
INDIA Cables.
50252278 Polycab India Limited (UH3) The Occupational Health & Safety
Rs. No. 12P2, 13, 15, 16/A, 16/B, 17 to 19, 20P1, Activities and supporting Process
20P2, 21 to 25, 26A, 26B, 30 to 33, 34/1, 34/2, 34/3, associated with
34/4, 65, 109, [
Village - Rampura & Noorpura Manufacture of building wire, Panel
Ta.: Halol, Dist.: Panchmahal - 389350, wire, multi core cables, Flat cables &
Gujarat Solar Cables
INDIA Manufacture of Optical Fibre
Cable, Fibre reinforced plastic
Rod, Aramid Reinforced Plastic Rod
and Impregnated Glass Fibre
Reinforced (IGFR).
Manufacture of Instrumentation
Cables, Communication Cables,
Fire Alarm System Cables, Fire
Survival Cables, LT Control and
Power Cables, Foundation
Fieldbus Cables, Modbus Cables,
Profibus Cables, CAN Bus Cables and
RS 485 Cable, Thermocouple Cables.
Manufacture of LAN Cables, Co-Axial
Cables, Flexible Braided Cables, CCTV
Cables, LT Control and Power Cables,
Cathodic protection cables and Railway
Signalling Cables.
20006771 Polycab India Limited (UH 1 & UH1A) The Occupational Health & Safety
335, 336 and 339/2/2/1& 2P2 Activities and supporting processes
Baska-Halol Road associated with the with the
District Panchmahal – 389 350 Manufacture of PVC & XLPE Low
Gujarat Voltage Power cables.
INDIA
20002386 Polycab India Limited (Depot) The Occupational Health & Safety
Survey - 346, 347, 348, 349 Activities and supporting processes
Airport Road, Village Kathiria associated with Warehousing Activities
Daman - 396 210
INDIA
Scope:
The Design and Manufacture of PVC, XLPE, ZHFR and EBXL Compound and Celling Fans.
The Manufacture of Galvanized Steel Wires, Strips, Conductors, Wires & Cables, Switchgears,
Conduits & Fittings and Tapes.
Trading of LED Lights, Fans, Switches & Luminaries
Engineering, Procurement & Construction (EPC) of EHV , HV & LT Electrical Work , Fire Alarm
System and Public Address Systems.
Through an audit, documented in a report, it was verified that the management system
fulfills the requirements of the following standard:
DQS Inc.
Brad McGuire
Managing Director
Accredited Body: DQS Inc., 1500 McConnor Parkway, Suite 400, Schaumburg, IL 60173 USA
Administrative Office: Deutsch Quality Systems (India) Pvt. Ltd., 5th Floor, Anjaneya Techno Park,
147, HAL Airport Road, Kodihalli, Bangalore - 560 017 - India 1/5
Annex to certificate
Registration No. 20002384 QM15
20005501 Polycab India Limited (Unit III) Manufacture of PVC, XLPE, PE,
96/1-7,100,2-6, EPR LT Power & Control
Daman Industrial Estate, Elastomeric Cables, Low and
Village – Kadaiya Medium voltage Power & Control
Daman - 396 210 cables, Low Voltage
INDIA Instrumentation Cables,
Telecommunication Cables, Fire
Survival Cables and Solar Cables.
Thermocouple Cables and RS-485
Cables, Railway Signalling, Power
and Indoor Cables.
20006771 Polycab India Limited (UH 1 & UH1A) Manufacture of PVC & XLPE Low
335, 336 and 339/2/2/1& 2P2 Voltage Power cables.
Baska-Halol Road
District Panchmahal – 389 350
Gujarat
INDIA
Scope:
The Environmental activities and supporting processes associated with the Design and
Manufacture of PVC and XLPE compound.
The Environmental activities and supporting processes associated with the Manufacture of
Conductors, Wires and Cables.
Through an audit, documented in a report, it was verified that the management system
fulfills the requirements of the following standard:
DQS Inc.
Brad McGuire
Managing Director
Accredited Body: DQS Inc., 1500 McConnor Parkway, Suite 400, Schaumburg, IL 60173 USA
Administrative Office: Deutsch Quality Systems (India) Pvt. Ltd., 5th Floor, Anjaneya Techno Park,
147, HAL Airport Road, Kodihalli, Bangalore - 560 017 - India 1/5
Annex to certificate
Registration No. 20002384 UM
20006921 Polycab India Limited (Unit -I & II) The Environmental Activities and
74/8-9, 38/1-6, 41/4-9, 42/1-2, 43/1-3 44/1-3, Supporting Processes associated
45/1-2, 46/5,6,8 with Manufacture of PVC/XLPE/
Daman Industrial Estate Elastomer Wires and Cables, Extra
Village - Kadaiya High, High, Medium and Low
Daman - 396 210 Voltage Power Cables, Rigid &
INDIA Flexible Wires, Cables for Fire
Resistant, Fire Survival, Zero
Halogen, Flame Retardant, Low
Smoke Cables & DC Solar Cables
for Industrial, Domestic and
Appliance, Applications, Grafted
Polyethylene to make crosslinked
PE, Jelly filled cables, Railway Dry
& Jelly Filled Quad Cables,
Railway Signaling cable, Power
and Indoor Cables.
20005501 Polycab India Limited (Unit III) The Environmental Activities and
96/1-7,100,2-6, Supporting processes associated
Daman Industrial Estate, with the Manufacture of PVC,
Village – Kadaiya XLPE, PE, EPR LT Power &
Daman - 396 210 Control Elastomeric Cables, Low,
INDIA Medium voltage Power & Control
Cables, Low Voltage
Instrumentation Cables,
Telecommunication Cables, Fire
Survival Cables, Solar Cables,
Thermocouple Cables and RS-485
Cables. Railway Signaling, Power
and Indoor Cables.
20006771 Polycab India Limited (UH 1 & UH1A) The Environmental Activities and
335, 336 and 339/2/2/1& 2P2 Supporting processes associated
Baska-Halol Road with the Manufacture of PVC &
District Panchmahal – 389 350 XLPE Low Voltage Power cables.
Gujarat
INDIA
20006770 Polycab India Limited (UH2 & UH2A) The Environmental Activities and
Plot No. 30, 31, 34, 42/1, 65/1 Supporting processes associated
Rameshra Road, Baska with the Manufacture of PVC,XLPE
District Panchmahal - 389 350 & Elastomer Cables, Medium, Low
Gujarat Voltage Power & Control Cables.
INDIA
Certificate No:
PCR-216/001
Certificate of Conformity
In respect of the location listed above and for the following scope of activities:
Scope of Certification:
Head Office Activities including: Sales, Purchasing, Design and Supply Chain, HR
Issue no: 7
Date: 07/08/2019
Scope:
The Occupaitonal Health & Safety activities and supporting processes associated with the
Design and Manufacture of PVC and XLPE compound.
The Occupational Health & Safety activities and supporting processes associated with the
manufacture of Conductors, Wires and Cables.
Through an audit, documented in a report, it was verified that the management system
fulfills the requirements of the following standard:
DQS Inc.
Brad McGuire
Managing Director
Accredited Body: DQS Inc., 1500 McConnor Parkway, Suite 400, Schaumburg, IL 60173 USA
Administrative Office: Deutsch Quality Systems (India) Pvt. Ltd., 5th Floor, Anjaneya Techno Park,
147, HAL Airport Road, Kodihalli, Bangalore - 560 017 - India 1/5
Annex to certificate
Registration No. 20002384 OHS18
Polycab India Limited
Polycab House 771
Pandit Satwalekar Marg
Mahim (West)
Mumbai - 400 016
Maharashtra
INDIA
Business Locations Scope
Relation #
20006921 Polycab India Limited (Unit -I & II) The Occupational Health & Safety
74/8-9, 38/1-6, 41/4-9, 42/1-2, 43/1-3 44/1-3, Activities and supporting
45/1-2, 46/5,6,8 processes associated with
Daman Industrial Estate Manufacture of PVC/XLPE/
Village - Kadaiya Elastomer Wires and Cables, Extra
Daman - 396 210 High, High, Medium and Low
INDIA Voltage Power Cables, Rigid &
Flexible Wires, Cables for Fire
Resistant, Fire Survival, Zero
Halogen, Flame Retardant, Low
Smoke Cables & DC Solar Cables
for Industrial, Domestic and
Appliance, Applications, Grafted
Polyethylene to make crosslinked
PE, Jelly filled cables, Railway Dry
& Jelly Filled Quad Cables,
Railway Signaling cable, Power
and Indoor Cables.
20006766 Polycab India Limited The Occupational Health & Safety
74/10-11, 52/1-2, 53/1,3,4, Activities and supporting
Daman Industrial Estate processes associated with the
Village – Kadaiya Manufacture of PVC / XLPE /
Daman - 396 210 Elastomer Cables, Extra High,
INDIA High, Medium Voltage Power
Cables, Jelly Filled
Telecommunication Cables, Dry
Telecommunication Wires &
Cables and PCM Cables, Control
& Instrumentation cables, Railway
Dry & Jelly Filled Quad Cables,
Signaling, Power and Indoor
Cables and PVC insulated
Aluminium screened cables for
railway signaling.
20002387 Polycab India Limited The Occupational Health & Safety
52/5-8, Daman Industrial Estate Activities and supporting
Village – Kadaiya, processes associated with the
Daman – 396 210 Manufacture of Low & Medium
INDIA Voltage Power Cables, Control
Cables, Special Cables (Radio
Frequency Cables or Co-axial
Cables, LAN Cables, CCTV
Cables, Flexible Braided Cables &
Dry Telephone Cables and
Railway Signalling Cable).
20005501 Polycab India Limited (Unit III) The Occupational Health & Safety
96/1-7,100,2-6, Activities and supporting
Daman Industrial Estate, processes associated with the
Village – Kadaiya Manufacture of PVC, XLPE, PE,
Daman - 396 210 EPR LT Power & Control
INDIA Elastomeric Cables, Low, Medium
voltage Power & Control Cables,
Low Voltage Instrumentation
Cables, Telecommunication
Cables, Fire Survival Cables, Solar
Cables, Thermocouple Cables and
RS-485 Cables. Railway Signaling,
Power and Indoor Cables.
20005063 Polycab India Limited (U4) The Occupational Health & Safety
Survey No. 67-72, 105, 106 Activities and supporting
Noorpura, District Panchmahal processes associated with the
Halol - 389 350 Manufacture of PVC, XLPE &
Gujarat Elastomeric Extra High Voltage,
INDIA High Voltage, Medium Voltage
Power Cables.
20006771 Polycab India Limited (UH 1 & UH1A) The Occupational Health & Safety
335, 336 and 339/2/2/1& 2P2 Activities and supporting
Baska-Halol Road processes associated with the with
District Panchmahal – 389 350 the Manufacture of PVC & XLPE
Gujarat Low Voltage Power cables.
INDIA
20002386 Polycab India Limited (Depot) The Occupational Health & Safety
Survey - 346, 347, 348, 349 Activities and supporting
Airport Road, Village Kathiria processes associated with
Daman - 396 210 Warehousing Activities
INDIA
Scope:
The Environmental activities and supporting processes associated with the Design and Manufacture of PVC and
XLPE compound.
The Environmental activities and supporting processes associated with the Manufacture of Conductors, Wires and
Cables.
Through an audit, documented in a report, it was verified that the management system
fulfills the requirements of the following standard:
20006921 Polycab India Limited (Unit -I & II) The Environmental Activities and
74/8-9, 38/1-6, 41/4-9, 42/1-2, 43/1-3 44/1-3, 45/1-2, Supporting Processes associated with
46/5,6,8 Manufacture of PVC/XLPE/ Elastomer
Daman Industrial Estate Wires and Cables, Extra High, High,
Village - Kadaiya Medium and Low Voltage Power
Daman - 396 210 Cables, Rigid & Flexible Wires, Cables
INDIA for Fire Resistant, Fire Survival, Zero
Halogen, Flame Retardant, Low Smoke
Cables & DC Solar Cables for
Industrial, Domestic and Appliance,
Applications, Grafted Polyethylene to
make crosslinked PE, Jelly filled
cables, Railway Dry & Jelly Filled Quad
Cables, Railway Signaling cable,
Power and Indoor Cables.
20005501 Polycab India Limited (Unit III) The Environmental Activities and
96/1-7,100,2-6, Supporting processes associated with
Daman Industrial Estate, the Manufacture of PVC, XLPE, PE,
Village – Kadaiya EPR LT Power & Control Elastomeric
Daman - 396 210 Cables, Low, Medium voltage Power &
INDIA Control Cables, Low Voltage
Instrumentation Cables,
Telecommunication Cables, Fire
Survival Cables, Solar Cables,
Thermocouple Cables and RS-485
Cables. Railway Signaling, Power and
Indoor Cables.
Manufacture of Instrumentation
Cables, Communication Cables,
Fire Alarm System Cables, Fire
Survival Cables, LT Control and
Power Cables, Foundation
Fieldbus Cables, Modbus Cables,
Profibus Cables, CAN Bus Cables and
RS 485 Cable, Thermocouple Cables.
20006771 Polycab India Limited (UH 1 & UH1A) The Environmental Activities and
335, 336 and 339/2/2/1& 2P2 Supporting processes associated with
Baska-Halol Road the Manufacture of PVC & XLPE Low
District Panchmahal – 389 350 Voltage Power cables.
Gujarat
INDIA
20006770 Polycab India Limited (UH2 & UH2A) The Environmental Activities and
Plot No. 30, 31, 34, 42/1, 65/1 Supporting processes associated with
Rameshra Road, Baska the Manufacture of PVC,XLPE &
District Panchmahal - 389 350 Elastomer Cables, Medium, Low
Gujarat Voltage Power & Control Cables.
INDIA
REGISTRATION LETTER
LEMS confirms that below mentioned company is under process for Initial Certification of Quality
management System ISO 9001:2015, Environment Managements System 14001: 2015 &
Occupational Health and Safety Management System 45001:2018.
Company has to be audited in compliance with specified procedure & criteria based on ISO 17021,
Management System Promotion Law, Management Operation guide, Manual and Procedure of the
certification body.
Not to object to any sanctions including suspension or withdrawal of certification in-case of non-
compliance with relevant regulations and criteria, and procedures defined by the certification body.
Authorized Signature.
Registered Middle East Office :- Lead Management Services, P.O.Box: 341323, Tel No.: +971 4 3334852, Fax No.: +971 4 3261043,
E-Mail.: gm@leadems.ae, website.: www.leadems.ae, DUBAI, UAE.
EXPO 2020 DUBAI – FRANCE PAVILION
Project Ref.: EXPO 2020 DUBAI Rev. Date
Doc. Ref.: A 16/08/20
6.Schedule of Materials
1 PHOTOVOLTAIC PANELS
2 INVERTER
3 DC CABLE
4 sq mm., Double
Polycab- 4 SQMM As per DEWA standards
insulated, unarmored
4 AC Cables
6 CABLE TRAYS
Project Name C38 District & Parks C.208 Desert Experience &
Observation Tower (North & South Park )
Capacity 173.5 kWp
Type of Installation Roof top + Façade Solar PV Plant
Design Consultant Parsons Overseas Limited
Project Management Consultant CH2M MACE
MEP Consultant Parsons Overseas Limited
Main Contractor KIER
8
Turnkey EPC Masdar Abu Dhabi Relocation of Solar PV Test Field + Ongoing
Installation of Off-Grid Solar PV
Plant
Turnkey EPC Dubai Dubai Solar PV Project at New Dubai 224 Ongoing
Municipality Prosecution Building kWp
Empereal Ruby Energy & Innovations. DMCC. Unit 90, DMCC Business Centre Level 1, P.O Box 474152, Dubai
Website – www.empereal.com
EXPO 2020 DUBAI – FRANCE PAVILION
Project Ref.: EXPO 2020 DUBAI Rev. Date
Doc. Ref.: A 16/08/20
Project Name Expo 2020 Development Package Project Reference No. S10
Material Details
Name Model Number Supplier
Solar PV Plant Empreal Ruby Energy Innovations
Samples No
PMC Template/Form
05007-FRM-P990000-QL-000013 Revision 4 Page 1 of 3
Document Ref. No. 60020-MAT-S105200-EL-000038 (2) Confidential ☐ Yes ☒ No
Others Yes
Note:
The requirements of above supporting documents shall be reviewed in accordance with the contract’s technical
specifications and the programme Assurance Minimum Standards. Where other supporting documents are required but
not in the list, it shall be provided under “Others”.
The material submission shall be to the satisfaction of the engineer that the material offered is equal or superior to and
fully comply with the material specified in the contract’s technical specification. If full suppoting documentation is not
available at the time of submission, the contractor shall indicate on this form when the respective documentation will be
available for formal submission to the engineer.
The material approval process is explained in the PMDS Activity Guide - Material Submission (Ref. 05007-ATG-P990000-
QL-000004).
Manolito Sagun On the basis of compliance response agreed by the MEP contractor. The material
Engineer submittals are approved. Rev 02
PMC Template/Form
05007-FRM-P990000-QL-000013 Revision 4 Page 2 of 3
Document Ref. No. 60020-MAT-S105200-EL-000038 (2) Confidential ☐ Yes ☒ No
Engineer’s Comments
HADL:
Material submittal is approved. All the RFI's raised have been closed.
As previously mentioned on Rev 1, Refer to PMI 00234 for drawings details and confirmation of scope
extent for PV cell requirements.
PMC Template/Form
05007-FRM-P990000-QL-000013 Revision 4 Page 3 of 3
Material Approval Request (MAR) Form
Document Ref. No. 60020-MAT-S105600-PL-000036(2) Confidential ☐ Yes ☒ No
Project Name Expo 2020 Development Package Project Reference No. S10
Contractor Name Al Futtaim Carillion Inspection Request No. Inspection Req. No.
Material Details
Name Model Number Supplier
EMPEREAL RUBY ENERGY
SOLAR PV SYSTEM
INNOVATIONS
Manufacturer Country of Origin Sample Location
PV Module – Jinko / Inverter –
Sungrow, Structure – Locally CHINA
Fabricated
Description Drawing Reference Specification
SOLAR PV SYSTEM 26 60 00 & 26 60 01
Attachments Yes/No Comments
Related IFC Drawings (or Standard Drawing
YES Enter comments
from Authority/s), Specifications and BOQ
PMC Template/Form
05007-FRM-P990000-QL-000013 Revision 4 Page 1 of 3
Document Ref. No. 60020-MAT-S105600-PL-000036(2) Confidential ☐ Yes ☒ No
Note:
The requirements of above supporting documents shall be reviewed in accordance with the contract’s technical
specifications and the programme Assurance Minimum Standards. Where other supporting documents are
required but not in the list, it shall be provided under “Others”.
The material submission shall be to the satisfaction of the engineer that the material offered is equal or superior to
and fully comply with the material specified in the contract’s technical specification. If full suppoting
documentation is not available at the time of submission, the contractor shall indicate on this form when the
respective documentation will be available for formal submission to the engineer.
The material approval process is explained in the PMDS Activity Guide - Material Submission (Ref. 05007-ATG-
P990000-QL-000004).
On the basis of compliance response agreed by the MEP contractor. The material submittals are
Manolito Sagun approved. Rev 02
Engineer
Structural coordination are required
Tarek Khalil e.construct reviewed this submittal from structural perspective only; accordingly, the structural
Senior Structural calculation and design drawings shall be " Revised and resubmitted " due to the following
Engineer comments:
e.construct 27-06-18
-Refer to comments in attached file on pages ( from 44 thru 269)
- STAAD model shall be provided.
- Steel Grade shall be S355.
- It is recommended to submit structural drawings and calculation in a separate submittal.
PMC Template/Form
05007-FRM-P990000-QL-000013 Revision 4 Page 2 of 3
Document Ref. No. 60020-MAT-S105600-PL-000036(2) Confidential ☐ Yes ☒ No
Engineer’s Comments
PMC Template/Form
05007-FRM-P990000-QL-000013 Revision 4 Page 3 of 3
Material Approval Request (MAR) Form
Document Ref. No. 60020-MAT-S105400-EL-000043(4) Confidential ☐ Yes ☒ No
Project Name Expo 2020 Development Package Project Reference No. S10
Contractor Name Al Futtaim Carillion Inspection Request No. Inspection Req. No.
Material Details
Name Model Number Supplier
Material Submital for Photo voltaic EMPEREAL RUBY ENERGY
Various components
system INNOVATIONS
Manufacturer Country of Origin Sample Location
PV MODULE-JINKO/INVERTER- China
SUNGROW
Description Drawing Reference Specification
PMC Template/Form
05007-FRM-P990000-QL-000013 Revision 4 Page 1 of 3
Document Ref. No. 60020-MAT-S105400-EL-000043(4) Confidential ☐ Yes ☒ No
Note:
• The requirements of above supporting documents shall be reviewed in accordance with the contract’s technical
specifications and the programme Assurance Minimum Standards. Where other supporting documents are
required but not in the list, it shall be provided under “Others”.
• The material submission shall be to the satisfaction of the engineer that the material offered is equal or superior to
and fully comply with the material specified in the contract’s technical specification. If full suppoting
documentation is not available at the time of submission, the contractor shall indicate on this form when the
respective documentation will be available for formal submission to the engineer.
• The material approval process is explained in the PMDS Activity Guide - Material Submission (Ref. 05007-ATG-
P990000-QL-000004).
Manolito Sagun No further comments from Hoare lea, Ensure test certificates are provided before deliveries.
Containment drawing from PV to inverter shall be ammended on separate IFC drawing. 12-Sept-18
Engineer Remaining comments below from HADL- e construct - Structure supports.
PMC Template/Form
05007-FRM-P990000-QL-000013 Revision 4 Page 2 of 3
Document Ref. No. 60020-MAT-S105400-EL-000043(4) Confidential ☐ Yes ☒ No
Engineer’s Comments
Refer to Struct Engineers comments.
☐ Rejected
PMC Template/Form
05007-FRM-P990000-QL-000013 Revision 4 Page 3 of 3
Material Approval Request (MAR) Form
Document Ref. No. 60020-MAT-S105681-EL-000016(2) Confidential ☐ Yes ☒ No
Project Name Expo 2020 Development Package Project Reference No. S10
Contract No. 60020- Al WASL PLAZA (TYPICAL) Contract Title Al WASL PLAZA (TYPICAL)
Contractor Name Al Futtaim Carilion Inspection Request No. Inspection Req. No.
Material Details
Name Model Number Supplier
Solar PV System with supporting
Empereal Ruby Energy Innovations
structures (Purlins)
Manufacturer Country of Origin Sample Location
PV Modules- Korea,BIPV Modules –
Empereal Click here to enter text.
Austria ,Inverters-CHINA,Switzerland
Description Drawing Reference Specification
Solar PV System N/A 26 60 00, 26 60 01 & 07 07 00
Attachments Yes/No Comments
Related IFC Drawings (or Standard Drawing
YES
from Authority/s), Specifications and BOQ
PMC Template/Form
05007-FRM-P990000-QL-000013 Revision 4 Page 1 of 3
Document Ref. No. 60020-MAT-S105681-EL-000016(2) Confidential ☐ Yes ☒ No
Samples NO NO
Note:
The requirements of above supporting documents shall be reviewed in accordance with the contract’s technical
specifications and the programme Assurance Minimum Standards. Where other supporting documents are required
but not in the list, it shall be provided under “Others”.
The material submission shall be to the satisfaction of the engineer that the material offered is equal or superior to
and fully comply with the material specified in the contract’s technical specification. If full suppoting documentation is
not available at the time of submission, the contractor shall indicate on this form when the respective documentation
will be available for formal submission to the engineer.
The material approval process is explained in the PMDS Activity Guide - Material Submission (Ref. 05007-ATG-
P990000-QL-000004).
PMC Template/Form
05007-FRM-P990000-QL-000013 Revision 4 Page 2 of 3
Document Ref. No. 60020-MAT-S105681-EL-000016(2) Confidential ☐ Yes ☒ No
Engineer’s Comments
PMC Template/Form
05007-FRM-P990000-QL-000013 Revision 4 Page 3 of 3
Material Approval Request (MAR) Form
Document Ref. No. 60020-MAT-S105481-EL-000021(3) Confidential ☐ Yes ☒ No
Project Name Expo 2020 Development Package Project Reference No. S10
Contract No. 60020- Al WASL PLAZA (TYPICAL) Contract Title Al WASL PLAZA (TYPICAL)
Contractor Name AF Construction LLC Inspection Request No. Inspection Req. No.
Material Details
Name Model Number Supplier
Material Submital for Photo voltaic EMPEREAL RUBY
system ENERGYINNOVATIONS
Manufacturer Country of Origin Sample Location
PV Module –LG/Inverter – PV Modules- Korea,BIPV Modules –
ABB,Sungrow/Mounting Purlins- Click here to enter text.
Austria ,Inverters-CHINA,Switzerland
Harsha- Abakus or Similiar
Description Drawing Reference Specification
Material Submital for Photo voltaic
266000 ,266001 & 07 0700
system
Attachments Yes/No Comments
Related IFC Drawings (or Standard Drawing
YES Enter comments
from Authority/s), Specifications and BOQ
PMC Template/Form
05007-FRM-P990000-QL-000013 Revision 4 Page 1 of 3
Document Ref. No. 60020-MAT-S105481-EL-000021(3) Confidential ☐ Yes ☒ No
Note:
• The requirements of above supporting documents shall be reviewed in accordance with the contract’s technical
specifications and the programme Assurance Minimum Standards. Where other supporting documents are
required but not in the list, it shall be provided under “Others”.
• The material submission shall be to the satisfaction of the engineer that the material offered is equal or superior to
and fully comply with the material specified in the contract’s technical specification. If full suppoting
documentation is not available at the time of submission, the contractor shall indicate on this form when the
respective documentation will be available for formal submission to the engineer.
• The material approval process is explained in the PMDS Activity Guide - Material Submission (Ref. 05007-ATG-
P990000-QL-000004).
Kamal Moukarzel Sen. Elec. Eng. Refer to the technical comment noted below KM 2-05-19
PMC Template/Form
05007-FRM-P990000-QL-000013 Revision 4 Page 2 of 3
Document Ref. No. 60020-MAT-S105481-EL-000021(3) Confidential ☐ Yes ☒ No
Kamal Moukarzel Sen. Elec. Eng. Refer to the technical comment noted below KM 2-05-19
Engineer’s Comments
PMC Template/Form
05007-FRM-P990000-QL-000013 Revision 4 Page 3 of 3
MaterialApprovalRequest(MAR)Form
DocumentRef.No. 60020ͲMATͲS105281ͲELͲ000032(2) Confidential տYes܈No
MaterialDetails
Name ModelNumber Supplier
SolarPVPlantswithSupporting
EBC EmperealEnergizigCommunities
Structure(Purlins)
Manufacturer CountryofOrigin SampleLocation
Refertoattachedscheduleinsection1 Korea/Austria/China/Switzerland Nill
Description DrawingReference Specification
SolarPVPlantswithSupporting
266000,266001&070700
Structure(Purlins)
Attachments Yes/No Comments
RelatedIFCDrawings(orStandardDrawing
Yes
fromAuthority/s),SpecificationsandBOQ
TechnicalLiterature/DataSheet Yes
Material/LabTestCertificate Yes
PreviousTestResults Yes
ISO9001,ISO14001&OHSAS18001 Yes
Certificates
TradeorCommercialLicence Yes
CertificateofCompliance(ForIndividual Yes
Material)
ComplianceStatement(ForFinal/Finished Yes
Product)
SustainabilityStandardCertificate No
EnvironmentalProductDeclaration(ForSteel No
andConcreteonly)
ChainofCustodyCertificate(ForTimber) No
SocialandEnvironmentalPolicies Yes
FireFightingCertificate(ForExposed No
Material)
PMCTemplate/Form
05007ͲFRMͲP990000ͲQLͲ000013Revision4 Page1of3
DocumentRef.No. 60020ͲMATͲS105281ͲELͲ000032(2) Confidential տYes܈No
MaterialSafetyDataSheet(MSDS) No
Samples No
PreviousConsulatnt/AuthorityApproval Yes
DetailsofWarranty Yes
Others Yes
Note:
x Therequirementsofabovesupportingdocumentsshallbereviewedinaccordancewiththecontract’stechnical
specificationsandtheprogrammeAssuranceMinimumStandards.Whereothersupportingdocumentsarerequiredbut
notinthelist,itshallbeprovidedunder“Others”.
x Thematerialsubmissionshallbetothesatisfactionoftheengineerthatthematerialofferedisequalorsuperiortoand
fullycomplywiththematerialspecifiedinthecontract’stechnicalspecification.Iffullsuppotingdocumentationisnot
availableatthetimeofsubmission,thecontractorshallindicateonthisformwhentherespectivedocumentationwillbe
availableforformalsubmissiontotheengineer.
x ThematerialapprovalprocessisexplainedinthePMDSActivityGuideͲMaterialSubmission(Ref.05007ͲATGͲP990000Ͳ
QLͲ000004).
Contractor’sComment(s)orAdditionalNotes,ifany.
ToBeCompletedBytheEngineer
Kamal Moukarzel
Sen. Elec. Eng.
Refer to the technical comment noted below KM
9-08-18
PMCTemplate/Form
05007ͲFRMͲP990000ͲQLͲ000013Revision4 Page2of3
DocumentRef.No. 60020ͲMATͲS105281ͲELͲ000032(2) Confidential տYes܈No
Engineer’sComments
ComplianceagainsttheProgramme“AssuranceMinimumStandards–Sustainability”:
܆FullCompliant
܆PartCompliant–Reasons:Specifyhere.
܆NotCompliant–Reasons:Specifyhere.
MaterialApprovalStatus:
܆Approved
܆ApprovedwithComments(ReferEngineer’sCommentsAbove)
܆Rejected
PMCTemplate/Form
05007ͲFRMͲP990000ͲQLͲ000013Revision4 Page3of3
Randy Labis QA/QC Engineer Kindly refer to the attached review sheet. R.L. 16/09/2019
Nagelle Fernadez SUSTAINABILITY & Kindly refer to the attached review sheet. N.F. 16/09/2019
ENVIRONMENTAL
SPECIALIST
Noli Jazmin Electrical Engineer Kindly refer to the attached review sheet. N.J. 16/09/2019
Mohamad Malkat Resident Engineer Kindly refer to the attached review sheet. 16/09/2019
The proposed material is in compliant with project requirements. Kindly refer to the attached review sheet.
Status B is strictly subject to Employer written acceptance of the
deviations from IFC specification identified herein. Contractor shall seek
Resubmission required
written approval accordingly
EXPO 2020 DUBAI – FRANCE PAVILION
Project Ref.: EXPO 2020 DUBAI Rev. Date
Doc. Ref.: A 16/08/20
Started in 2008, EMPEREAL has grown to become one of the global leaders in research and development of
Concentrated Solar Thermal Power (CSP) generation, Biomass processing and Thermal Desalination technology.
Along with its partner Harsha Abakus, Empereal has completed over 395 MW of free field and roof top Photo
Voltaic projects and has over 165 MW of projects under implementation in India and U.A.E. Today, the EMPEREAL
Harsha name is synonymous with reliability in developing, sourcing and implementing leading-renewable energy
technology, value and customer service and support.
Through continuous improvisation and investment, we are committed to achieving reliable, world-class and cost-
effective renewable energy-based solutions for Power and water generation. Our cherished goals are to develop
renewable and eco-friendly technologies in a scalable and replicable manner. For the tropical and equatorial
regions where solar radiation is intermittent, we focus on hybrid solutions or solar thermal and thermal storage
solutions for the generation of power and desalinated water.
Empereal is one of the largest indigenous solar thermal energy research companies in India. We are an accredited
in-house R&D facility by the Department of Scientific & Industrial Research (DSIR). We are one of the leading
system integrators and EPC companies in the Solar Photovoltaic industry. In UAE we are certified by DEWA for solar
projects through our subsidiary Mill Projects Technical Services LLC.
Our Vision
Empereal Energy Services will become the "Provider of Choice" for renewable energy and desalinated water in
rapidly growing economies. Within five years, we plan to meet the energy needs of over five million people and the
pure water needs of over twenty million people.
Our Mission
Empereal aims to empower communities through access to clean energy and pure water delivered via innovative,
reliable and cost-effective technologies. Empereal wants to contribute to social projects that improve the quality of
life for rural communities. We are committed to providing appropriate technologies that enhance the health and
standard of living of these communities.
Core Values
As evidenced by past accomplishments Empereal is into continuous research and development activities in a wide-
ranging spectrum of technological achievements in the renewable energy sector. Our focus is on solar, power
production, solar-biomass power production and desalination using agricultural output and agro-waste output.
• Quality workmanship
• Experienced Project Management
Empereal Ruby Energy & Innovations DMCC, Unit 90, DMCC Business Center, Level 1, Jewellery & Gemplex 3,
Dubai, P.O Box 474152
Website – www.empereal.com
Page 2 of 4
• Design Competence
• Best in class components
• Leading edge R&D and customised solutions
• Local Presence
• Safety
Our Solutions
Power Production
Power is vital to the growth of economies. In the Emerging Market economies there is a growing gap between
demand and supply of power. Renewable energy provides an opportunity to meet this challenge.
Empereal produces continuously available power from renewable energy sources in an economically sustainable
and environmentally friendly manner. The combination of our patented and award-winning Linear Fresnel based
Concentrating Solar Thermal technology and Biomass based power generation or Thermal storage, provides base
load power from renewable energy sources.
U.A.E has an abundance of solar radiation. Empereal Power solutions are ideally suited to help utilities, institutions
and large power consumers meet their power demands in the most cost-effective manner. Solar Photo Voltaic
solutions and Empereal Linear Fresnel based Solar Thermal solutions can be implemented as a standalone or as an
integrated solution with other fossil fuels like natural gas.
Solar Desalination
Water is fundamental to sustaining life. The rapid rise in the global population and increased usage of water for
agricultural and industrial usage is putting immense pressure on this scarce but vital resource. Desalination from
sea water and brackish water is one of the most relevant solutions to meet the freshwater requirements. Empereal
meets the energy requirements of desalination in a most cost-effective solution, providing ultra-pure water through
thermal desalination and Forward Osmosis. Our water solutions provide ultra-pure water for use by coastal
communities, specialized industries and by high quality water bottling plants.
• Generate power and water
• Water at ≤ $ 1.2 per Cu.mtr from solar desalination using MED , RO or FO.
• Decentralized power and water generation.
Process Steam
Empereal provides standalone solar thermal, biomass or hybrid solar thermal and biomass systems or Thermal
storage systems, for meeting the process steam requirements of various industries like textiles, sugar mills, paper
mills, diary farms, enhanced oil recovery, district cooling etc.
Empereal Ruby Energy & Innovations DMCC, Unit 90, DMCC Business Center, Level 1, Jewellery & Gemplex 3,
Dubai, P.O Box 474152
Website – www.empereal.com
Page 3 of 4
Using its indigenously developed and patented, award winning Linear Fresnel technology, Empereal offers the most
innovative and cost-effective solution for a range of industrial users. Our solutions offer a wide temperature range
from 100 degree C to 500 degree C and can be integrated with a wide range of applications and systems.
Empereal is an approved vendor for solar process steam systems under the Ministry of New and Renewable Energy
of India.
• High efficiency method for producing process steam
• Can be used in EOR or other applications like space cooling and heating
Customer Support
EMPEREAL has a large pool of experienced and certified engineers that work to global delivery standards. At
EMPEREAL, we listen to your requirements carefully and develop a customized maintenance and support solution that
best fits your needs, including:
• Preventative Maintenance
• Spares Management
• Staff Augmentation
• 24/7 Remote Monitoring
• Fully Outsourced Arrangements
• Control Room Monitoring
Awards and Recognitions
• On 13th August, 2009 Dr. A. P. J. Abdul Kalam, former President of India inaugurated our Solar Thermal
Research Centre in Coimbatore. This is one of the largest solar thermal research and testing facilities in
India.
• Our in-house Research and Development unit is recognized and certified by the Department of Scientific &
Industrial Research (DSIR), Govt. of India.
• Empereal-KGDS is a manufacturer and provider of Concentrated Solar Thermal solutions approved by the
Ministry of New and Renewable Energy (MNRE) in India.
Our Partners
Empereal Ruby Energy & Innovations DMCC, Unit 90, DMCC Business Center, Level 1, Jewellery & Gemplex 3,
Dubai, P.O Box 474152
Website – www.empereal.com
Page 4 of 4
Our position as market leader compels us to fulfill our commitment to our clients, and offer the worlds most
advanced and cutting edge innovative technological solutions. To support our promise, we have created and
nurtured strategic partnerships with global technology companies and government entities such as MASDAR, KISR,
Indian Institute of Technology, National Thermal Power Corporation etc which have resulted in privileged
relationships that serve a mutual interest.
As a company that has envisioned and prioritized regional growth, we are always looking to cement partnerships
and establish relationships with suppliers and innovators who are interested in exploring opportunities across the
world.
Empereal Ruby Energy & Innovations DMCC, Unit 90, DMCC Business Center, Level 1, Jewellery & Gemplex 3,
Dubai, P.O Box 474152
Website – www.empereal.com
Company Overview
Many parts of the world, with their high solar radiation, are ideally suited for various
applications of PV and CSP
Photovoltaic & Solar Thermal
(CSP) Technologies
Solar PV Installations
• Empereal solar energy solutions produces
reliable power and water at prices
CHEAPER than conventional methods
Solar
Completed Projects: 34 MW, Karnataka, 03.16 2x10 MW, Gujarat, 01.15
Mega-Watt Scale
Solar PV
Completed Jindal Polyfilms – 3MW
Delhi Airport – Busiest in India
Projects: Complex 2 MW, 2017
And Sensitive
Locations
• Years of experience in
implementing solar
projects in sensitive and
complex project
environments like airports TATA Automotive, 2MW
Carport, Germany
and operating factories
Solar PV
Large Ground
mounted
• Design, procurement
and installation of
the 110 MW solar
PV plant at NLC,
Tamil Nadu, India.
Solar PV
Architectural Solar
• Complex structural designs
to meet the Architectural
requirements to install
customised solar PV on
iconic buildings
Solar PV
Solar PV Automated Cleaning Project for Masdar
Masdar, UAE Tracking system at Masdar
• System to test Automated cleaning technologies for large scale solar PV projects in the ME region
• Fixed Tilt systems, single Axis trackers and Robotic cleaning systems
• Commissioned in December 2018
Solar PV
Design and Installation of Solar PV at Thematic Districts, Expo 2020
Under commissioning
• Design and Implementation of rooftop solar PV at Thematic District pavilions for Expo 2020 .
• 33 Buildings Commissioned in Mid 2019
Solar PV
Design and Installation of Solar PV at Al Wasl Plaza, Expo 2020
Under commissioning
• Design and Implementation of rooftop solar PV and BIPV canopies at Al Wasl Plaza for Expo 2020
• Commissioned - 2019
Solar PV
Design and Installation of BIPV at North and South Park , Expo 2020
Work In Progress
• Design and Implementation of canopy and Façade BIPV at North and South Park for Expo 2020
• Commissioning in February 2020
Solar PV
Design and Installation of BIPV at UAE Pavilion, Expo 2020
Work In Progress
• Design and Implementation of customized solar panels integrated to the UAE Pavilion
• Commissioning in May 2020
Solar PV
Solar Thermal and
Desalination Solutions
for Rapidly Growing
Economies
Concentrating Solar Thermal Power Linear Fresnel Reflector (LFR)
• Simple and Robust System
• Efficient Single Axis Tracking
• Compact and Land Efficient
• Very Low Wind Resistance
• Direct Steam Generation
• Solar to steam conversion efficiencies > 65%
Solar Thermal
Empereal’s LFR: Custom Made Configurations
High Temperature With Medium Temperature Low Cost High Efficiency Solar Thermal Storage
Thermal Storage Applications System
400°C to 500°C super heated Up to 260°C saturated steam For hot water applications – Molten salt in PCM mode and
steam 80°C to 98°C accumulator based storage
Useful for power generation Useful for power generation For water desalination and air Used in power generation and
with efficient thermal storage or combined power and water conditioning energy solutions for 24x7
desalination solutions and operation
EOR
Provides high efficiency and Can suit a wide range of Can work with thermal Customizable for different
cost effective energy storage operating parameters storage for continuous operating temps and pressure
operation
Solar Thermal
Empereal’s
Research Centre
Solar Thermal
Empereal Combined LFR And PT System
• Development of a 2MWth Delhi, India
Solar Thermal Power Facility
– Commissioned in 2011
Solar Thermal
Solar-biomass Thermal Desalination System
Linear Cavity
Receiver First Solar Desalination Project In India
• Empereal Hybrid Solar
Thermal desalination -
Commissioned in 2013 Steam drum
• Role: Design,
Engineering,
Implementation and
O&M Accumulator
MED
• Capacity: 150,000 liters Reflector
per day potable water
from sea water.
Solar Thermal
Solar Desalination Achievements and Awards
• Produces ultra-pure industrial grade water (< 5ppm) The project won
• Direct saturated steam generating LFR technology the National
Innovation Award
• Thermal energy storage for uninterrupted and reliable for 2014 from
operation Indian Chamber of
• Integration of solar and biomass for round-the-clock Commerce (FICCI)
production and HSBC
• Durable and safe technology
• Unique, Innovative, Scalable, Replicable, Eco-friendly,
Decentralized
• One of the Top 8 Technology Innovations of 2011 by
MIT, USA
Solar Thermal
Temperature: 500 °C
Super Heated
Steam With
Thermal Storage
• Two stage system for very
high temperature
applications.
Solar Thermal
Molten Salt & Accumulator
Thermal Storage
• 4 Hour, 0.25 GJ of thermal energy storage –
commissioned in 2014
Solar Thermal
Flue Gas Desalination: 2000 MW NTPC Simhadri Coal Power Plant
Simhadri, India
• Waste heat from the 2,000 MW coal plant flue gas captured for MED based thermal desalination to produce
precious boiler replenishment DM water
• Empereal Role : Design, Detailed engineering, System Integration, Implementation and Commissioning
• Capacity: 140,000 Liters per day of 0.5 ppm DM water
Solar Thermal
Tapping Unutilized Resources To Improve Sustainability Of A
Coal Plant
Blow Down Water Flue Gas based Sea Water Desalination System Flue Gas From
from Cooling Tower Chimney
Solar Thermal
Solar Thermal Desalination: 1500 MW NTPC Vallur Coal Power Plant
Vallur, India
• Solar Thermal hot water driven MED based thermal desalination to convert seawater to potable grade water
• Empereal Role : Design, Detailed engineering, System Integration, Implementation and Commissioning
• Capacity: 125,000 Liters per day of potable water
Solar Thermal
Solar Thermal Desalination: 1500 MW
NTPC Vallur Coal Power Plant
• Solar Thermal heat is captured to convert
sea water to 120,000 litres per day of
potable water.
Solar Thermal
Empereal: Fine Tuning The Worlds Largest LFR Plant
125MW LFR, Dhursar, Rajasthan, India
Empereal is fine tuning the engineering and operations of the entire 125 MW plant to meet its operations and
production targets (Dec 2015 – Dec 2017)
Solar Thermal
World’s Largest LFR Plant: Performance Enhancement
Achievements
• Empereal redesigned the control logic and
process flow of the plant • Stabilized operations
• Implemented innovative thermal monitoring • Improved LFR outlet steam temperature from 340°C to 390°C
• Completed Optical and Thermal plant • Over 50% increase in steam production
modeling and optimizations • Improved utilization of solar collector area
• Designed and implemented fixtures to • Stable control systems and enhanced revenue and profits
overcome material defects and limitations • Sunfocus Magazine highlights this project providing a 62.5%
performance improvement.
Solar Thermal
Solar Thermal For Solar Desalination
Ghantoot, UAE Inaugurated on May 2017 by CEO, MASDAR
• Empereal LFR based Solar Thermal system - 40,000 Litres per day of 98°C water for solar
desalination.
• Designed and setup for Masdar, UAE
• Commissioned in May 2017
Solar Thermal
Empereal & Trevi – Solar Powered Forward Osmosis – The
Future of Desalination
• Empereal and Trevi corporation have
teamed up to setup solar powered
Forward Osmosis Systems
Solar Thermal
Solar Powered Forward Osmosis – Ramnathapuram, India
• Reliable and cost effective thermal energy storage at a fraction of the cost of
battery storage for electricity
• Consulting
• Feasibility studies
• Design EPCM
PROJECT DEVELOPER
• Engineering (engineering, procurement,
BOO, BOT
construction, management)
• Financing ( with partners)
• Implementation CSP, PV and
Solar PV markets
• Operating & Maintenance water markets
Empereal Corporate & Operations Structure