Professional Documents
Culture Documents
17.05
2.0 CERTIFICATION/LISTINGS
• This system is certified to ISO 9001:2008 by the LPCB under certificate No. 104.
ALWAYS REFER TO ANY NOTIFICATIONS AT THE END OF THIS DOCUMENT REGARDING PRODUCT INSTALLATION, MAINTENANCE OR SUPPORT.
victaulic.com
17.05 7960 Rev C Updated 04/2021 © 2021 Victaulic Company. All rights reserved.
1
victaulic.com
4.0 DIMENSIONS
No. W410 90º Long Radius Elbow
No. W411 45º Elbow
No. W420 Tee
C to E
C to C to
E E
10 IC
C C to
W L
o. U
C
N CTA
VI
to E E
No.WAULIC
to E
11
T
VIC
C to
E
C to E
NO. W410 NO. W410 NO. W411 NO. W411 NO. W420
14-16"/350-400 mm 18-24"/450-600 mm 14-16"/350-400 mm 18-24"/450-600 mm
direct grooved only w/welded tangents direct grooved only w/welded tangents
NOTE
• Note: No. W420 Tee's are segmentally welded.
17.05 7960 Rev C Updated 04/2021 © 2021 Victaulic Company. All rights reserved.
victaulic.com 2
victaulic.com
4.1 DIMENSIONS
Tees
No. W425 REDUCING TEE
(Segmentally Welded Stainless Steel) VICTAULIC
No.W25
C to
SE
C to
LE
NO. W425
NOTE
• Outlet sizes 12"/300 mm and smaller will be provided with original IPS Victaulic roll grooves, suitable for use with original Victaulic grooved couplings in that
size range.
17.05 7960 Rev C Updated 04/2021 © 2021 Victaulic Company. All rights reserved.
victaulic.com 3
victaulic.com
C to
SE
C to
LE
NO. W425
NOTE
• Outlets 12"/300 mm and smaller will be provided with original Victaulic roll grooves, suitable for use with original Victaulic grooved couplings in that size range.
17.05 7960 Rev C Updated 04/2021 © 2021 Victaulic Company. All rights reserved.
victaulic.com 4
victaulic.com
4.2 DIMENSIONS
Adapter Nipple
No. W442 AGS Grv. × Bev.
No. W443 AGS Grv. × AGS Grv. E to E E to E E to E
No. W449 AGS Grv. × OGS Grv.
17.05 7960 Rev C Updated 04/2021 © 2021 Victaulic Company. All rights reserved.
victaulic.com 5
victaulic.com
4.3 DIMENSIONS
Flanged Adapter Nipple
No. W445R ANSI Class 150 Raised Face E to E
NO. W445R
No. W445R
Size Flanged Adapter Nipple
Nominal Actual Approx.
Size Outside Diameter E to E Weight Each
inches inches inches lb
DN mm mm kg
14 14.000 8.00 122.0
DN350 355.6 203 55.3
16 16.000 8.00 136.0
DN400 406.4 203 61.7
18 18.000 8.00 168.0
DN450 457.0 203 76.2
20 20.000 8.00 208.0
DN500 508.0 203 94.3
24 24.000 8.00 274.0
DN600 610.0 203 124.3
4.4 DIMENSIONS
Cap
No. W460 E to E
NO. W460
No. W460
Size Cap
Nominal Actual Approx.
Size Outside Diameter E to E Weight Each
inches inches inches lb
DN mm mm kg
14 14.000 9.50 33.2
DN350 355.6 241.3 15.1
16 16.000 10.00 41.2
DN400 406.4 254.0 18.7
18 18.000 11.00 54.6
DN450 457.0 279.4 24.8
20 20.000 12.00 67.5
DN500 508.0 304.8 30.6
24 24.000 13.50 96.0
DN600 610.0 342.9 43.5
NOTE
• Threaded weld outlets optional. Please contact Victaulic for tap sizes.
17.05 7960 Rev C Updated 04/2021 © 2021 Victaulic Company. All rights reserved.
victaulic.com 6
victaulic.com
4.5 DIMENSIONS
Concentric/Eccentric Reducer
No. W450 Concentric
No. W451 Eccentric
E to E E to E
NO. W450 NO. W451
NOTE
• Outlets 12"/300 mm and smaller will be provided with standard Victaulic roll grooves, suitable for use with standard Victaulic grooved couplings in that size range.
17.05 7960 Rev C Updated 04/2021 © 2021 Victaulic Company. All rights reserved.
victaulic.com 7
victaulic.com
4.5 DIMENSIONS
Concentric/Eccentric Reducer
No. W450 Concentric
No. W451 Eccentric
E to E E to E
NO. W450 NO. W451
NOTE
• Outlets 12"/300 mm and smaller will be provided with standard Victaulic roll grooves, suitable for use with standard Victaulic grooved couplings in that size range.
17.05 7960 Rev C Updated 04/2021 © 2021 Victaulic Company. All rights reserved.
victaulic.com 8
victaulic.com
5.0 PERFORMANCE
The chart expresses the frictional resistance of various Victaulic fittings as equivalent feet/meters of straight
pipe. Fittings not listed can be estimated from the data given, for example, a 22½° elbow is approximately one-
half the resistance of a 45° elbow.
Size
Tees
Nominal Actual
Size Outside Diameter 90° Elbows 45° Elbows W420
inches inches
DN mm No. W410 No. W411 Branch Run
14 14.000 15.8 11.0 70.0 23.0
DN350 355.6 4.8 3.4 21.3 7.0
16 16.000 18.0 13.0 80.0 27.0
DN400 406.4 5.5 4.0 24.4 8.2
18 18.000 20.0 14.0 90.0 30.0
DN450 457.0 6.1 7.2 27.4 9.1
20 20.000 22.5 16.0 100.0 33.0
DN500 406.4 6.9 4.9 30.5 10.1
24 24.000 27.0 19.0 120.0 40.0
DN600 406.4 8.2 5.8 36.6 12.2
NOTE
• The flow data listed is based upon the pressure drop of Schedule 10S pipe.
• Contact Victaulic for data on sizes not shown above.
17.05 7960 Rev C Updated 04/2021 © 2021 Victaulic Company. All rights reserved.
victaulic.com 9
victaulic.com
6.0 NOTIFICATIONS
WARNING
• Victaulic AGS products use a patented groove profile that requires the use of special AGS rolls. AGS products
must not be used on pipe that has been grooved using standard grooving rolls.
Failure to use AGS products on AGS grooved pipe could result in serious personal injury, property damage, joint
leakage or joint separation.
17.05 7960 Rev C Updated 04/2021 © 2021 Victaulic Company. All rights reserved.
victaulic.com 10