Professional Documents
Culture Documents
(215.9 mm)
PRODUCT SPECIFICATIONS:
IADC: M433
Number of Blades: 8
Cutter Quantity (Total, Face): 82, 74
Primary Cutter Size .529 in (13.4 mm)
Number of Nozzles: 4
Nozzle Type: MSP
Fixed TFA 0 in² (0 mm²)
Gauge Length 2.5 in (63.5 mm)
Junk Slot Area 9.6 in² (61.9 cm²)
Bit Breaker: 010-500-088, 123-223-329, 123-214-437
015-154-057, 123-203-583, 123-221-453
Connection: 4-1/2 API REG
Makeup Torque:
5 1/2" Bit Sub 12.5 - 13.7 kft-lb (17.0 - 18.6 kNm)
5 3/4" Bit Sub 16.5 - 18.0 kft-lb (22.4 - 24.4 kNm)
6"+ Bit Sub 17.6 - 19.5 kft-lb (23.9 - 26.4 kNm)
ReferencePartNumber: N4061
Status: P
OPERATING RECOMMENDATIONS*:
Hydraulic Flow Rate: 300 - 750 gpm (1150 - 2850 lpm)
Rotation Speed: For Rotary and Motor Applications
Max. Weight On Bit: 67 klb (30 tn or kdaN)
* The ranges of bit weight and RPM shown are representative of typical operating parameters, but will not necessarily yield optimum bit life or lowest drilling cost. It is not
recommended that the upper limits of both weight and RPM be run simultaneously. Contact your local Hughes Christensen representative for recommendations in your area.
bhiTrackPage("Bit","Bit Stylesheet"); %>