Professional Documents
Culture Documents
FlexiROC C65
Technical specification
Ultimate performance, highest energy efficiency and outstandning productivity, just to name a
few benefits with FlexiROC C65
Main components:
• Operator´s cabin, ROPS and FOPS approved with rubber vibration dampers
• Automatic feed force control system
• Hydraulic Tophammer COPROD
• Caterpillar turbo charged diesel engine CAT C13 with tier 4 technology
• Atlas Copco screw compressor
• Single boom system
• Heavy duty track frames with triple grouser pads and cleaning holes, hydraulic track oscillation and two speed traction
• Service hand lights inside canopy
• Toe hole drilling capability on SF version
• Break-out table with pressure regulating kit
Hole range
Recommended hole range
FlexiROC C65 CR 89, CR 102, CR 127, CR 140 105 - 180 mm 4 1/8” - 7 1/12”
Hydraulic rod handling system for max hole depth, with 3,6 m (12’ ) sections
FlexiROC C65 CR 89, CR 102 32 m 105’
Hydraulic rod adding system for max hole depth, with 6,1 m (20’) sections
CR 89 36 m 118’
FlexiROC C65
CR 102, CR 127, CR 140 30 m 98’
Specifications FlexiROC C65
Engine Compressor
Caterpillar turbo charged, diesel engine, CAT C13, Tier 4/stage Atlas Copco C146 - M07, screw type compressor
IIIB • Working pressure, max ....................... 12 bar 171 psi
• Power rating at 2000 rpm ................... 328 kW 440 HP • FAD, at normal working pressure....... 254 l/s 540 cfm
• Fuel consumption, approx .................. 55 l/h 14,5 US gal/h
Aluminium feed Hydraulic system
Hydraulic cylinder feed with hose guide and double drill tube Hydraulic oil cooler
support with break-out table and movable lower guide/dust hood • Max ambient temperature .................. 50°C 122°F
• Feed extension .................................... 1 150 mm 3’ 9’’ Pumps
• Feed rate, max .................................... 0.9 m/s 177 ft/min • Axial piston pump (1) ........................ 275 l/min 73 US gal/min
• Feed force, max .................................. 40 kN 8 992 lbf • Gear pump (2) ................................... 117 l/min 31 US gal/min
• Tractive pull, max ............................... 50 kN 11 240 lbf • Gear pump (3) ................................... 63 l/min 16.6 US gal/min
• Total length ......................................... 12 200 mm 40’ • Gear pump (4) ................................... 34 l/min 8.9 US gal/min
• Travel length ....................................... 7 500 mm 24’7’’ • Gear pump (5) ................................... 37 l/min 9.8 US gal/min
Option short mast • Gear pump (6).................................... 37 l/min 9.8 US gal/min
• Feed extension .................................... 1 900 mm 6’ 3’’ Return and drainage filters (2 x 3 filters)
• Total length ......................................... 9 100 mm 29’ 10’’ • Filtration rate ..................................... 20 µm absolute
• Travel length ....................................... 5 200 mm 17’ 1’’
Electrical system
Dust collector DCT 200 including preseparator
• Voltage ................................................ 24 V
• Filter area ............................................20 m2 215 sq.ft • Batteries .............................................. 2 x 12 V, 185 Ah
• Number of filter elements ...................20 pcs • Alternator ............................................ 28 V, 95 Ah
• Suction capacity at 500 mm wg..........850 l/s 3 002 cfm • Work lights, front ................................ 4 x 70 W
• Suction hose diam...............................152 mm 6’’ • Work lights, rear ................................. 2 x 70 W
• Cleaning air pressure, max .................8 bar 116 psi • Warning lamp and reverse buzzer
• Cleaning air consumption ...................2-4 l/pulse 4-8 cfm • Work lights, feed................................. 2 x 70 W
Air conditioner
• Refrigerant ..........................................R134a
• Cooling capacity .................................5,5 kW
• Fan suction capacity ...........................125 l/s 265 cfm
COP 4050CR FlexiROC C65 40 kW 54 HP 200 bar 2 900 psi 40/60 Hz 3 030 Nm 2 235 lbf/ft 400 kg 880 lb
Transport dimensions FlexiROC C65
Feed dumped
Height and Lenght
Feed dumped
H1
L2
Side view
2500
3700
330
3550
5450
582
1 040
Horizontal reach (mm) with long feed
B
2140
30º
Coverage areas
2 659
2 277
2440
13º
30
4230
32º
Toe-hole drilling reach for short feed
Horizontal reach (mm) with short feed
2140
2440
25º
25º
9851 2497 01b © Copyright 2009, Atlas Copco Rock Drills AB, Örebro, Sweden. All product names in this publication are trademarks of Atlas Copco. Any unauthorized use or copying of the contents or any part thereof is prohibited. Illustrations and photos may show
Printed in Sweden 2011-12 equipment with optional extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are subject to change without notice. Consult your Atlas Copco Customer Center for specific information.