This document outlines a marking scheme for evaluating an installation project across 9 objectives. The objectives include properly installing features, positioning devices correctly according to aesthetics and stability criteria, securely fixing equipment and supports, neatly labeling and routing wires in supports, labeling cables and securing wiring, ensuring good aesthetic appearance of strands and combs, checking electric measurements and commissioning according to regulations, respecting industry standards and safety regulations, and working methodically with an optimized workstation. Points are allocated for each objective based on criteria and performance is marked out of the total possible points.
This document outlines a marking scheme for evaluating an installation project across 9 objectives. The objectives include properly installing features, positioning devices correctly according to aesthetics and stability criteria, securely fixing equipment and supports, neatly labeling and routing wires in supports, labeling cables and securing wiring, ensuring good aesthetic appearance of strands and combs, checking electric measurements and commissioning according to regulations, respecting industry standards and safety regulations, and working methodically with an optimized workstation. Points are allocated for each objective based on criteria and performance is marked out of the total possible points.
This document outlines a marking scheme for evaluating an installation project across 9 objectives. The objectives include properly installing features, positioning devices correctly according to aesthetics and stability criteria, securely fixing equipment and supports, neatly labeling and routing wires in supports, labeling cables and securing wiring, ensuring good aesthetic appearance of strands and combs, checking electric measurements and commissioning according to regulations, respecting industry standards and safety regulations, and working methodically with an optimized workstation. Points are allocated for each objective based on criteria and performance is marked out of the total possible points.
obtained 1 Insure all of the features required Verify the correct operating 4 in the installation 2 Position the visible devices Respect the setting-up and the 4 correctly and meet the criteria of dimensions. Horizontality, aesthetics and solidity verticality, curvature … Pipes, wires, devices, support 3 Fix by solid catchers and with Adapt screws and fixations to the 4 adapted fixations the equipments requested work and the supports of wires 4 Label and position correctly wires Tidy up the wires in order and 5 in supports label them in their locations 5 Label the cables and tighten the Tighten properly the wiring in its 7 wirings of cubicles according to location the criteria of realization 6 Look after the aesthetics of Visualize the work to obtain a 4 realization of strands, combs, good aesthetic side passage of the wires 7 Check all the values of the Verify that the working of circuit 12 electric measurements. Perform is in accordance with the the commissioning according of regulations and Commission. the rules of art. 8 Respect the rules of the art, the Respect the rules, the 5 professional standards and the professional standards and the safety regulations safety. 9 Work methodically and optimize Organize his/her working 5 the ergonomics of the environment and Proceed in a workstation methodical way