Professional Documents
Culture Documents
In AUTOMATIC mode (switch (1) in position left ) the operator can additionally
influence the maximum compaction force and thereby the maximum vertical
amplitude by turning the rotary switch (2) accordingly. The stage to be selected
depends on material, layer thickness, soil conditions and the experience of the
operator. Once the permissible soil stiffness is reached, the Variocontrol system
will reduce the compaction force. Jumping operation is already noticed at a very
early stage and the system will be adjusted accordingly. The adaptation to the
compaction conditions results in a uniform compaction and load bearing
capacity.
30 cm 0,6 mm stage 2
60 cm 1,1 1,5 mm stage 3 + 4
> 60 cm 1,8 2, 4 mm stage 5 + 6