Professional Documents
Culture Documents
Automated.
Integrated.
Efficient. Building blocks for a fully
automated prepress line.
Designed for today’s CtP network, Glunz &
Conveyor
Jensen’s Automation Equipment communicates
to either the punch bender or CtP front-end Move any size plates,
either in pre-bent or
systems. With all equipment linked, there is a post-bent, without dam-
controlled plate flow, giving the production age. Custom configured
operator the information to efficiently control for proper length and fit
within your specific plate
plate production. line scenario.
Barcode readers on
Our “endless belt system” the bender, UTM and
is the only one of its kind conveyors allow for track-
in the industry. It ensures ing, sorting and collating
transport of plates without plates throughout the
any damage or scratching. prepress process.
Conveyor UTM Collating Stacker
Model Slave controlled Independently controlled UTMH / UTMHR 2 position 4 position
Perfomance
All capacities; newspaper and
Market position All capacities; newspaper and commercial production All capacities; newspaper and commercial production
commercial production
Powered and controlled by Independently powered and Independently powered and
Automation control Powered and controlled by the punch bender
the punch bender controlled controlled
Plate thickness 0.20-0.30 mm (0.008-0.012”) 0.20-0.30 mm (0.008-0.012”) 0.20-0.30 mm (0.008-0.012”)
Consumption
110-240 VAC, 50/60 Hz,
Electrical requirements 110-240 VAC, 50/60 Hz, 5 amp, single phase 110-240 VAC, 50/60 Hz, 5 amp, single phase
5 amp, single phase
Air, 90 PSI (10 CFM) /
Pneumatic requirements Air, 90 PSI (5 CFM) / 6.205mBar (141.58 LPM) Air, 90 PSI (5 CFM) / 6.205mBar (141.58 LPM)
6.205mBar (283.17 LPM)
General
Single or dual plate stream UTM with various deck lengths;
2 position stacker with 4 position stacker with
One-way entry conveyor with conveyors with various deck optional plate rotator and
Standard models various deck sizes; optional various deck sizes; optional
various deck lengths lengths; optional hinged sec- optional hinged section for
transport trolley in some sizes transport trolley in some sizes
tion for plateline access plateline access
Pre-bender barcode system, Post-bender barcode system, Additional length on conveyor (in increments of 305 mm/12”); Extra hinge section for conveyor or
Accessories
UTM, Plate rotator assembly for UTM
This brochure only show a very little selection of our equipment and capabilities
for plate automation. We can create and supply anything from simple standard
components to advanced custom solutions.
Visit our website for more inspiration and let us know what we can do for you.
Glunz & Jensen A/S Glunz & Jensen, Inc. Glunz & Jensen Asia
www.glunz-jensen.com