Professional Documents
Culture Documents
The final laboratory report - whether received in an electronic form or as hardcopy - is the
axle upon which any oil analysis program turns. Without a solid grasp of the underlying
principles of reading and understanding the analysis report, the inexperienced reader is
likely to quickly grow frustrated with trying to make sense of the seemingly unintelligible
test data. However, with just a few basic rules and a modicum of understanding, any oil
analysis neophyte can quickly come to grips with reading and understanding an oil
analysis report. The following 10 tips are provided to allow anyone new to the oil analysis
game to come to terms with his or her reports.
Tip No. 1:
Know the Sampling Point Before Reviewing Its Report
When the moment comes to review your latest set of sample results, it is unlikely that you
will have the time to look up each piece of supporting data for each sampling point as you
read. Familiarity with the machines you monitor, in all senses of the term - operational,
mechanical, maintenance and servicing - is essential for relating mechanical, operational
and documentary machine information to the oil analysis results. Recording supporting
information, like filter changes and oil top-offs as they happen can also help correlate
changes and problems highlighted by the report to maintenance activities.
Tip No. 2:
Provide Feedback to the Lab Regarding Your Findings
If you are working with a commercial laboratory, the report interpretation process should
be a collaborative process between you and the professional analyst. Lab analysts
specialize in the chemical and physical oil analysis tests and how they relate to diagnosing
mechanical and lubricant-related problems in the sampled system. You, on the other
hand, have the field experience on the sampled system’s operation and application. You
know the actual result of any actions you took and damage you discovered based on the
data from a given report. Consider the report as a locked room full of treasure; but the lock
requires two keys to open. You have one key and the analyst has the other. The room will
never be opened without timely, routine communication and cooperation. Without the
analyst’s input, you may never learn in depth how problems on the horizon create changes
in certain results, and without your input, the analyst may never learn the operational
details that are sometimes necessary for a set of results to make sense.
Tip No. 3:
Learn About Magnitudes of Change for Common Test Results
Nothing is more frustrating than seeing a wear metal result change from two to four (a 100
percent increase), only to find that the lab did not flag the data as significant. This can
often leave you wondering if something was missed. One key to resolving this situation is
to grasp how vanishingly small one part per million (ppm) is. To put this into
understandable terms, try this: find a standard-size (not jumbo) paper clip composed of
iron and dissolve it in one liter (1.06 quarts) of oil. Take a sample of this oil, send it to the
lab and have it analyzed. If the lab has perfect calibration on a perfect spectrometer - one
able to pick up all the iron in the sample - the result should come back close to 500 parts
per million by weight (the standard reporting scale for elemental analysis). This illustrates
how a large numerical value may be associated with a small actual quantity of material.
When looking at the change in wear metal concentrations from sample to sample, it is
important to consider:
z the total area of oil-wetted surface in the system that is made of the metal whose
level changed, and
z the total volume of oil in which the wear metal is suspended.
One of the more challenging aspects of learning how to interpret oil analysis data is
reaching a reasonable conclusion on whether wear is being generated from the entire oil-
wetted area of the part(s) composed of a given metal, or just a small portion of it. For
example, in a particular geared drive with a five-liter oil capacity, iron has increased from
115 to 281 ppm from one sample to the next. Does this represent wear generated over the
entire two square feet of iron alloy gear surface, for example due to corrosion, or does it
represent two square inches of one side of a flaking gear tooth?
Tip No. 4:
Locate the Worst Reports and Address Them First
You should start by sorting multiple reports by severity/condition status. The
severity/condition status statement or code is the lab’s capsule summary that
characterizes the overall seriousness of the conditions revealed by the analysis. It
provides the report reader with a rapid way to tell if the latest sample from a given
sampling point requires immediate review or action. It is important to sort the samples with
the highest priority (critical, alarm, etc.), then the next highest (abnormal, alert, etc.). Once
the critical and abnormal samples have been identified, the reports that indicate minor
result changes but do not require immediate action (marginal, monitor, etc.) should be
grouped with the normal sample reports - hopefully the majority of your sampled
machines. As a part of this step, glance at the sampling point ID and determine if the
systems are misidentified when compared with the most recent analysis samples.
Tip No. 5:
Proof the Report’s Clerical Data before Examining the Numerical Data
Verify the Report’s Routing
Are you the report’s intended recipient? If not, is it because of a simple clerical error such
as a misspelled or incomplete address, or is the sample completely misrouted or
mismailed? Laboratory clerical mistakes can be easily corrected by faxing the laboratory a
corrected hard copy of the report. In the case of larger accounts with multiple areas of
responsibility, it is essential to provide the lab with accurate names, addresses, phone
numbers and e-mail contact points.
First, you should review the system supporting information - machine and lubricant
information used for interpretation of the test results. This information is usually found in a
block near the top of the form. Note any reports that have missing or obviously erroneous
data for later correction and forwarding of updates to the lab. Next, look at the difference
between the date the sample was taken and the date the lab received it. An extended time
between the sampling date and the day it was received at the lab may reveal turnaround
issues that may not be related to lab performance, such as storing the samples for an
extended time before mailing them or using an inherently slow mail service.
Finally, you should look for missing or obviously incorrect lubricant-in-service data - the oil
manufacturer, brand and grade. This customer-provided information is vital to the proper
interpretation of the test results, because it underlies all serviceability assessments of
viscosity and additive content.
Tip No. 6:
Read and Interpret the Report in a Logical Order
Review the Analyst’s Comments First
This step comes before “read the test results” for a good reason. By definition, the specific
purpose for the analyst’s comments is to interpret any significant changes in machine
condition as indicated by significant values or trends in the data. If you attempt to review
the test results before reading the recommendations, you will often encounter minor
sample-to-sample variations which have no diagnostic significance, but which will beg
explanation. Having read the analyst’s comments first, when you do reach the test results
you are already sensitized to the information that the laboratory professional considers of
primary importance. It is, in a sense, like reading the answers before taking the test.
Once you overcome your understandable desire to jump directly to the numbers on your
report, review the summary statement, which in most cases begins the analyst’s
comments. It should give you a concise overview of whether the conditions detected fall
into the realm of contamination, oil degradation or abnormal wear.
It is best to focus initially on one test at a time. The report presents a great deal of
numerical data and text in a small space; it is easy for the eye to be overloaded by all the
data. To guide your eyes, use the embedded shadings and lines between vertical and
horizontal columns, if your report format has them. When viewing a large number of
reports, remember to take breaks - when your eyes are tired it is easy to overlook a small,
important detail.
When reading the numerical data, take note of the abbreviations used by the lab for
different tests. For example, if the lab report prints out the chemical symbol for each wear
metal instead of the full element name, and you are not familiar with all of the
abbreviations, you may feel a little lost. Try to learn each element’s chemical symbol, or
ask for a diagnostic chart from the lab to explain what each one means. Most labs provide
such charts free of charge to their customers.
Likewise, other test data may be listed under an abbreviated heading like FTIR-Ox
(Fourier transform infrared oxidation data) or RPVOT (rotating pressure vessel oxidation
test). Learn what these abbreviations mean, and most importantly, how the test data
pertains to diagnosing certain problem conditions.
Presently, there is no generally accepted inter-laboratory set of abbreviations for the wide
range of physical and chemical properties tests. If coded abbreviations appear instead of
full text headings and they are not immediately understandable, look on the back of the
report for a key to the test codes. If no key is given, contact your laboratory for a test code
key; not knowing what test a given abbreviation stands for is one of the major sources of
reader frustration when scanning a report.
Tip No. 7:
Look for Confirming Diagnostics/Symptoms - The Second Opinion
The medical analogy often used to explain the role of oil and oil analysis as the lifeblood of
mechanical equipment is appropriate here. If you were diagnosed with a serious condition
and your doctor recommended surgery, it would be perfectly reasonable to seek another
doctor’s advice on whether that surgery was necessary. Similarly, when oil analysis results
come back indicating problems, take the time to see if other condition-monitoring
technologies being used on that system are also showing alert indications - increases in
vibration readings, rising operating temperatures or surface hot spots near critical parts
can all help to support or confirm oil analysis data interpretation. The system operator may
also have noticed poor or erratic response, excessive noise or an inability of the system to
reach full-rated load or speed. Sensory evaluations, performance observations, oil
analysis, vibration analysis and thermography operate on different diagnostic principles
and each has its own strengths and weaknesses, but multiple alert indications signal that
it’s time to act.
Tip No 8:
Gauge Your Response - Don’t Under- or Over-React
When faced with a confirmed abnormal oil analysis report, take it for what it usually
represents - an early warning. With a well-planned oil analysis test program, you often
have time to plan your next step. Production and maintenance scheduling for the affected
system may allow you to group other actions together with those directly related to the oil
analysis findings. Previous successes in diagnosing problems may also give you
management support to take quick action where necessary. In reviewing all data, but
particularly wear and additive element data, remember that although sharp up or down
shifts may indicate a serious problem, one sample is not a trend. More often than not, the
correct response to a single elevated reading is to immediately resample and retest to
confirm the initial data. However, also be wary of the most common, usually incorrect
response to a bad sample report - an oil change, a little time and another sample will cure
the problem. Ailing equipment rarely cures itself!
Tip No. 9:
Get Into a Report Reading Routine
It has often been said that if you do something every day for six weeks, it will become a
habit. That’s a good approach to reading your oil analysis reports. Set up a specific time,
and if necessary, a specific place to review your reports. It’s best to read reports before
scheduling the next day’s activities and well in advanced of scheduled downtime so that
any investigation of detected conditions can be factored into the production timetable.
Much time and effort is spent in creating your lab reports. High-quality oil analysis,
supported by qualified chemists and engineers in the lab, is one of the most valuable tools
in the condition-monitoring toolbox. Labs work hard to place critical machine condition
data at your fingertips - it’s up to you to take it the rest of the way.
Editor’s Note
This article is an excerpt from a conference paper presented at Noria’s Lubrication
Excellence 2003 conference held in Houston April 1-3, 2003. For a complete full-length
version of this article and others on lubrication fundamentals and strategies, oil analysis
and contamination control best practices, copies of the full conference proceedings can be
purchased at Noria’s online bookstore.