This document provides a bibliography of 7 references related to wind turbine power generation from highways. The references discuss using vertical axis wind turbines (VAWT) and combining wind turbines with solar panels to generate electricity from highways. One reference assesses the wind energy potential from highways, while others discuss designing and fabricating vertical axis wind turbines for power generation at highway medians and their improved efficiency for reducing the gap between power demand and supply.
This document provides a bibliography of 7 references related to wind turbine power generation from highways. The references discuss using vertical axis wind turbines (VAWT) and combining wind turbines with solar panels to generate electricity from highways. One reference assesses the wind energy potential from highways, while others discuss designing and fabricating vertical axis wind turbines for power generation at highway medians and their improved efficiency for reducing the gap between power demand and supply.
This document provides a bibliography of 7 references related to wind turbine power generation from highways. The references discuss using vertical axis wind turbines (VAWT) and combining wind turbines with solar panels to generate electricity from highways. One reference assesses the wind energy potential from highways, while others discuss designing and fabricating vertical axis wind turbines for power generation at highway medians and their improved efficiency for reducing the gap between power demand and supply.
1. Mithun K K and Ashok S “Wind Turbine for Highway Wind Power
Generation” IJEEE, Volume 07, Issue 01, Jan- June 2015. 2] Dhiraj Varma and Ajitabh Pateriya “VAWT and Solar Panel Combine System Based Generation of Electricity through Highway" IJRISE, Vol.3, 2017. pp: 137- 140. 3] S.Selvam, Edison Prabhu .K, Bharath Kumar M.R, & Andrew Mathew Dominic “Solar and Wind Hybrid power generation system for Street lights at Highways” International Journal of Science, Engineering and Technology Research (IJSETR), Volume 3, Issue 3, March 2014
[1]. NiranjanaSJ “Power Generation by Vertical Axis Wind Turbine”
International Journal of Emerging Research in Management &Technology ISSN: 2278-9359 (Volume-4, Issue-7). [2]. Mr.Mukesh Kumar Sharma. “Assessment of Wind Energy Potential from Highways”. International Journal of Engineering Research & Technology (IJERT) Vol. 1 Issue 8, October - 2012 ISSN: 2278-0181 [3]. Mark Paluta, Dan Reitz, Ryan Snelling, Joe Gadient “Design and Fabrication of a Vertical Axis Wind Turbine University of Notre Dame Department of Aerospace and Mechanical Engineering”. [4]. H. Fernández, A. Martínez, V. Guzmán and M. Giménez. - Wind Turbine Generation System Implemented with a Car Alternator for Use in Isolated Locations. RE & PQJ, Vol. 1, No.2, April 2004 [5]. Arvindkumar; Sandeep kumarsingh – Wind Power Generation on Highway. [6]. Anil Prasad; Asifulla A; Suhas S; Satish Karemmanavar. “Design and Fabrication of Vertical Wind Turbine For Power Generation At Highway Medians”. Bapuji Institute Of Engineering And Technology, Davangere. [7]. XiaonaJi, Jorag Schluter, “Design and Analysis of small-scale Vertical Axis Wind Turbine”, Nanyang Technological University.. Wind is a cost effective, green, renewable energy resource for power generation. Highway side application of wind turbine with improved efficiency can help us to reduce a gap between demand and supply of power. The working model of the project is combined energy source with solar system and vertical axis wind turbine system which is a good and effective solution for power generation in highways. And basically this system involves the combination of two energy system, suppose anyone source fails to generate another source will keep generating the electricity and will give the continuous power to the load. The renewable energy sources such as solar and wind energy are used to generate the electricity. Therefore, the energy can be converted into electricity even from the moving vehicles on the highway. This project can also be developed by changing the number of blades and with the materials used. This is applicable for the entire region, and the regional parameters also are taken in to account for the better results. This idea does not require any limitations and large space like nuclear or other types of power plants,
This system is environmental friendly. The working model of our project is
combined energy source with solar system and vertical axis wind turbine system which is a good and effective solution for power generation, basically this system involves the combination of two energy system, suppose anyone source fails to generate another source will keep generating the electricity and will give the continuous power to the load. The renewable energy sources such as solar and wind energy are used to generate the electricity.