Professional Documents
Culture Documents
Infrastructure
Drifter
HB10
Drifter HB10
Drifter HB10
HB10 is a small-size Drifter (top-hammer) especially developed for:
• Micropile drilling up to a casing diameter of 3 inch (ø76 mm)
• Threaded hollow bar drilling (self-drilling anchors) up to a bar
diameter of 1.5 inch (ø40 mm)
• Blast hole drilling up to a hole diameter of 2.5 inch (ø65 mm)
HB10 has a standard built-in rubber damping mechanism to avoid blank impacts and to allow
percussion during retraction of casings.
HB10 offers a version without rubber damping mechanism, mainly for the use in quarries.
HB10 offers 4 different motors (110 ccm, 160 ccm, 245 ccm, 310 ccm).
Percussion Unit
Options
Shank Adaptors (Striker Bars)
- external flushing head for casings and self-drilling
hollow bars
- integrated flushing through extended shank adaptor
Male thread R32 left | R38 left | T38 left
(striker bar)
Female thread R32 left | R38 left - drifter version without damping mechanism available
Titan 30/11 left | 40/16 left - motor position could be on the left side or on top
(right side position is not possible)
Drifter HB10
Rotary Drives
Motor-Version 110 ccm
Pressure at rotary drive 140 bar 170 bar 200 bar 240 bar
Gear 1 st
1 st
1 st
1st
Torque (Nm) 300 400 500 600
30 Speed (rpm) 176 167 158 148
Oil flow rate
Torque (Nm) 300 400 500 600
50
Speed (rpm) 318 306 291 310
(lpm)
Pressure at rotary drive 140 bar 170 bar 200 bar 240 bar
Gear 1 st
1 st
1 st
1st
Torque (Nm) 500 600 700 800
50 Speed (rpm) 211 204 196 185
Oil flow rate
Torque (Nm) 500 600 700 800
75
Speed (rpm) 306 298 290 275
(lpm)
Pressure at rotary drive 100 bar 140 bar 170 bar 200 bar
Gear 1st 1st 1st 1st
Torque (Nm) 500 700 900 1,000
50 Speed (rpm) 136 133 128 121
Oil flow rate
Torque (Nm) 500 700 800
75
Speed (rpm) 206 200 194
(lpm)
Pressure at rotary drive 70 bar 100 bar 140 bar 170 bar
Gear 1 st
1 st
1 st
1st
Torque (Nm) 400 600 900 1,100
50 Speed (rpm) 117 116 114 110
Oil flow rate
Torque (Nm) 400 600 900
75
Speed (rpm) 167 165 163
(lpm)
Dimensions
Drifter HB10
HB10 with rubber damping mechanism HB10 drilling in a quarry HB10 without rubber damping mechanism
Materials Services
Infrastructure
TKINF.222.e.1.0,2.08-20.DS