Professional Documents
Culture Documents
GENERAL CATALOGUE
S700X1/S500X1/S300X1
Global Service Sites
Local dealers are available to provide services in each region, in addition to the sites below.
U. S. A.
BROTHER INTERNATIONAL CORP.
Germany
BROTHER INTERNATIONALE INDUSTRIEMASCHINEN GmbH
R450X1/M140X1
MACHINE TOOLS DIV. TECHNICAL CENTER MACHINE TOOLS DIVISION FRANKFURT TECHNICAL CENTER
2200 North Stonington Avenue, Suite 270, Hoffman Estates, IL 60169, U.S.A. Hoechster Str.94, 65835 Liederbach, Germany
PHONE:(1)224-653-8415 FAX:(1)224-653-8821 PHONE:(49)69-977-6708-0 FAX:(49)69-977-6708-80
Thailand India
BROTHER COMMERCIAL THAILAND LTD. BROTHER INTERNATIONAL (INDIA ) PVT LTD.
MACHINE TOOLS TECHNICAL CENTER
1232 Rama 9 Road, Suanluang Sub-District, Suanluang District,
Bangkok 10250, Thailand
BANGALORE TECHNICAL CENTER
Park Landing, Ground Floor, Municipal No.5AC-709, 2nd Block, HRBR Extension,
Bangalore - 560 043 Karnataka, India
TC-22B/TC-20B
PHONE:(66)2-374-6447 FAX:(66)2-374-2706 PHONE:(91)80-6405-7999
TC-22B TC-20B
Excellent
High machining environmental
capabilities performance
TC-32BN TC-31B
QT FT
High-speed operations and optimized control have been achieved by the #30 spindle taper and original NC, Reduction in power and air consumption results in a great decrease in CO2 emissions,
enabling the machine to demonstrate high productivity. making the machine more earth-friendly and providing high environmental performance.
World’s fastest
Nonstop ATC Simultaneous operation Low power consumption Low air consumption
synchronized tapping
Fastest tool change among #30 spindle Using the original nonstop ATC code(G100) World's fastest highly accurate tapping has Equipped with a power regeneration system that reuses energy generated Chip removal performance has been enhanced by optimizing the air
machines has been achieved by quick allows the machine to simultaneously position been achieved, using our original synchronized when decelerating, high-efficiency motor, energy saving pump, LED work purge path and air blast timing, greatly reducing air consumption.
start/stop of the spindle, high acceleration the X/Y-and additional axes while performing a tapping control and a fast acceleration/ light and other energy saving functions, achieving low power consumption.
and quick response when the Z-axis moves tool change, leading to further reduction of deceleration spindle motor.
up and down, and optimized magazine wasted time.
Power Air
operation. consumption consumption
Power consumption
for one cycle Approx. for one cycle Approx.
80%less 80%less
Air consumption
︵ kWh/cycle
︵ L/min
︶
︶
*Data taken running *Data taken running
machining program machining program
created by Brother created by Brother
Pursuit of Usability
Original NC with emphasis on usability improves work efficiency and operating rate at production sites.
Pursuit of Machining Capabilities
Operability Machining support functions
The highly rigid structure and high-power spindle motor allow the machine to demonstrate
its broad machining capabilities, from high-efficiency machining to heavy-duty machining. Equipped with ‘shortcut’ keys to quickly open Equipped with machining support functions, such
the desired screen, and ‘sub folders’ to make as torque waveform display, high accuracy mode,
program management easier, in addition to a and automatic heat expansion compensation.
Highly rigid structure High-power spindle motor USB memory interface, menu programming
function and tap return function.
Based on accumulated data using analysis High-speed, high-efficiency machining has been achieved using a spindle motor with high torque
technologies, a highly rigid structure with vibration in the medium- and high-speed range. High-torque specifications (optional) greatly improve
suppressed has been achieved, allowing the machine low-speed range torque, providing excellent heavy-duty machining for steel workpieces.
to demonstrate excellent machining capabilities
Medium-and high-speed range enabling Low-speed range suitable for
high-efficiency machining heavy-duty machining Shortcut keys Maintenance functions
3 4
Compact Machining Center Overwhelming High Productivity
Positioning time
︵ ms
︶
*When moving from
Z-axis zero point to
stroke center Former model SPEEDIO
Machine rigidity has been further improved based on data accumulated over Various spindle motor specifications are available to ensure broad machining
years using analysis technologies. For the Z-axis in particular, the stress path is capabilities, such as the standard specifications with medium- and high-speed
reduced, leading to an improvement in rigidity of approximately 15%. properties enabling high-efficiency machining, and the high-torque
specifications with low-speed properties suitable for heavy-duty machining.
Standard
specifications
Max. torque
(momentary) :40 Nm
Max. output :18.9 kW
:92 Nm
High-torque Max. torque
specifications (momentary)
(optional)
Max. output :26.2 kW
Machining accuracy has been greatly improved by new servo control High-speed and highly accurate three-dimensional machining has been
and offset functions, and a machine structure that minimizes the effects achieved by high-speed spindle specifications with a maximum speed
of thermal deformation. For example, the roundness in circular of 27,000 min-1(optional)and original three-dimensional machining
machining has been improved by approximately 30% control with look-ahead function and smooth path offset function.
Diameter : D80 mm
Circular machining Look-ahead function
Material : Aluminum
(Standard)
Roundness:
200 blocks
5 6
Compact Machining Center Compact Machining Center
Item Item
min-1 MAX. 6,000(27,000min-1 specifications:MAX. 8,000) Max.loading capacity kg(lbs) One face 120(265)
[200(441)
] *6
Speed during tapping Table (uniform load) 40(88.2)
Spindle
7/24 tapered No.30 Maximum table kg・m(lb
・inch2 ) —
Tapered hole load inertia
2
0.32(1093)
(BIG-PLUS)
BT dual contact system Optional Table position time sec. 2.9 *11 —
(CTS)
Coolant Through Spindle Optional(CTS option is not available for 27,000min-1 spec.) 10,000min-1 specifications:10∼10,000
10,000min-1 specifications:10∼10,000
Spindle speed min-1 16,000min-1 specifications(Optional)
:16∼16,000
Rapid traverse rate m/min(inch/min) 50 × 50 × 56(1,969 × 1,969 × 2,205) -1 16,000min-1 specifications(Optional)
:16∼16,000
(XYZ-area) 10,000min high-torque specifications(Optional)
:10∼10,000
Feed rate
Cutting feed rate mm/min(inch/min) X、
Y、Z axis:1∼30,000(0.04∼1,181)*7 Speed during tapping min-1 MAX. 6,000 MAX. 6,000
Spindle
Tool shank type MAS-BT30 Tapered hole 7/24 tapered No.30 7/24 tapered No.30
Axis feed motor kW X、Y axis:1.0 Z axis:2.0 Max. tool weight *1 kg(lbs ) 3.0(6.6)
〈 total tool weight : 25(55.1)
for 14 tools, 40(88.2)
for 22 tools 〉 3(6.6)
Power supply AC V±10%、50/60Hz±1Hz Tool selection method Random shortcut method Random shortcut method
*1/Actual tool weight differs depending on the configuration and center of gravity.The figures shown here are for reference only. *2/Spindle motor output differs depending on the spindle speed.
*3/Measured in compliance with ISO standards and Brother standards.Please contact Brother for details. *4/Brother specifications apply to the pull studs for CTS. *5/Measured in compliance with JIS
B6336-9 and MAS011-1987. *6/Can be increased up to 200 kg(one face)by changing the parameter. Please consult us separately. *7/When using the hydraulic rotary joint, the Y-axis travel becomes
290 mm. *8/Values when the low-floor table is selected *9/When using high accuracy mode B. *10/Regular air pressure varies depending on the machine specifications, machining program details,
or use of peripheral equipment. Set the pressure higher than the recommended value *11/When table loading on one face is 120kg
9 10
NC unit specifications
Standard NC functions Option list
Machining capability
Installation options Standard function
NC unit specifications
CNC model CNC-C00 Least input increment 0.001mm, 0.0001inch, 0.001 deg.
Control axes S500X1、S300X1:5 axes
S700X1、 (X,Y,Z two additional axes) Max.programmable dimension ±9999.999mm, ±999.9999inch
R450X1:7 axes
(X,Y,Z 4 additional axes) Display 12.1-inch color LCD Coolant unit 50L with valve and 180W pump
M140X1:5 axes
(X,Y,Z,A,C) Memory capacity (Total capacity of program and data bank)
Approx.100 Mbytes 100L with valve and 250W pump
Simultaneously Positioning (X,Y,Z,A,B)
5 axes External communication (Optional)
USB memory interface, Ethernet, RS232C with chip shower, valve and 250W + 250W pumps
controlled axes
M140X1:5 axes
(X,Y,Z,A,C) No.of registrable programs (Total capacity of program and data bank)
4,000 150L with chip shower, valve and 250W + 400W pumps
Interpolation Linear:4 axes
(X,Y,Z one additional axis) Program format (changed by parameter)
NC language, conversation , conversion
with chip shower, CTS, valve and 250W + 400W + 650W pumps
M140X1:4 axes
(X,Y,Z,C) from conversation program to NC laguage program available
Coolant unit Two-step chip conveyor
Circular:2 axes Helical/conical:3 axes
(X,Y,Z) M140X1:NC language *Conversation language not available.
Coolant unit Coolant tank with chute
*When program size is bigger than 2 Mbytes, machine works with extended memory operation. *Ethernet is a trademark or registered trademark of XEROX in the United States.
(BIG-PLUS)
BT dual contact system
(CTS)
Coolant Through Spindle *1 *1 *1
(for CTS)
Back washing system
Standard NC functions Optional NC functions (air-assisted type)
Tool washing
(motor-driven)
Automatic door
Area sensor
Machining capability
Specified color
10,000min-1 D32×0.2 D28×0.15 D25×0.1 M27× 3.0 M24× 3.0 M16×2.0 960:100×3.2×3,000 137:40×6.0×573 100:40 × 5.2 × 484
Low-floor table
(1.26×0.008) (1.1×0.006) (0.98×0.004) (1-8UNC) (7/8-9UNC) (5/8-11UNC)(58.6:3.94×0.13×118.1) (8.4:1.57×0.24×22.6) (6.1:1.57×0.2×19.1)
Grip cover
D40 ×0.2 D34 ×0.15 D30 ×0.15
10,000min-1 (1.57×0.008) (1.34×0.006)(1.18×0.006) M39×4.0 M33×3.5 M27×3.0 1,700:100× 5.7×3,000 137:40×6.0×573 100:40 × 5.2 × 484 Top cover
high-torque D30 ×0.7 D26 ×0.4 D26 × 0.25 (1 1/2-6UNC) (1 1/4-7UNC) (1-8UNC) (102.4:3.94×0.22×118.1)(8.4:1.57×0.24×22.6) (6.1:1.57×0.2×19.1)
(1.18×0.03) (1.02×0.02) (1.02×0.01) (transparent board type)
Side cover *4
16,000min -1 D24 ×0.2 D22×0.15 D18×0.1 M22×2.5 M18×2.5 M14×2.0 660:100×2.2×3,000 73:40×3.2×573 48:40 × 2.5 × 484 (with transparent window)
Side door *4
(0.94×0.008) (0.87×0.006)(0.71×0.004) (7/8-9UNC) (5/8-11UNC) (1/2-13UNC)(40.3:3.94×0.09×118.1) (4.5:1.57×0.13×22.6) (2.9:1.57×0.1×19.1) Mesh basket for chips
(25 pin)
RS232C for control box
27,000min-1 D20×0.2 D19×0.15 D17×0.1 M22×2.5 M18×2.5 M12×1.75 600:100×2.0×3,000 45:40×2.0×573 24:40 × 1.2 × 484
(0.79×0.008) (0.75×0.006)(0.67×0.004) (7/8-9UNC) (5/8-11UNC) (7/16-14UNC)(36.6:3.94×0.08×118.1) (2.7:1.57×0.08×22.6) (1.5:1.57×0.05×19.1) (EXIO board)
Expansion I/O board EXIO board assembly, Additional EXIO board assembly
(6 holes, 10 holes)
Switch panel
R450X1 (approx. 500 Mbytes)
Memory expansion
ADC Cast iron Carbon steel ADC Cast iron Carbon steel ADC Cast iron Carbon steel (look-ahead 200 blocks, smooth pass offset)
High accurancy mode BⅡ
Submicron command
10,000min-1 D32×0.2 D28×0.15 D25×0.1 M27× 3.0 M24× 3.0 M16×2.0 960:100×3.2×3,000 128:40×5.6×573 81:40 × 4.2 × 484
(1.26×0.008) (1.1×0.006) (0.98×0.004) (1-8UNC) (7/8-9UNC) (5/8-11UNC)(58.6:3.94×0.13×118.1) (7.8:1.57×0.22×22.6) (5.0:1.57×0.17×19.1) Interrupt type macro
16,000min-1 D24 ×0.2 D22×0.15 D18×0.1 M22×2.5 M18×2.5 M14×2.0 660:100×2.2×3,000 73:40×3.2×573 48:40 × 2.5 × 484 States and/or other countries. *4/Standardly equipped with R450X1 22 tool magazine model.
(0.94×0.008) (0.87×0.006)(0.71×0.004) (7/8-9UNC) (5/8-11UNC) (1/2-13UNC)(40.3:3.94×0.09×118.1) (4.5:1.57×0.13×22.6) (2.9:1.57×0.1×19.1)
11 12
TC-22B TC-31B
High-end table traverse model suitable Compact, high productivity machine
for machining large workpieces enabling nonstop small parts machining
● Largest machining area among Tapping Centers ● Slim body, equipped with a QT table
● Highly accurate large boring achieved by improved machine rigidity ● Enhanced machining capabilities through improved rigidity, in spite
and rigidity balance of the compact body
● The machining room is separated from the tool stocker, ● Equipped with an 26-tool magazine to handle various types
reducing problems caused by chips. of machining
#15 spindle model ideal for machining Brother’s machine tools improve production efficiency in a broad range of mass-production parts machining.
small precision parts
● High productivity achieved by the fastest spindle speed and shortest
ATC time among Tapping Centers
● Super space-saving machine at a size of 0.9 m x 1.7 m
● Highest environmental performance in its class
① ② ③ ④ ⑤
⑥ ⑦ ⑧ ⑨ ⑩
TC-32BN ⑪ ⑫ ⑬ ⑭ ⑮
QT FT
High-end column traversee
machine applicable to a ⑯ ⑰ ⑱ ⑲ ⑳
wide range of machining
■Automotive and motorcycle parts ■ Information Technology and
General machinery parts
①CVT intermediate housing ⑤EPS housing ⑨Flywheel ⑬Brake master cylinder
● Equipped with a 26- or 40-tool magazine, enabling expansion of ②Clutch case ⑥Throttle body ⑩AT transmission case ⑭Shiftfork ⑯Mobile phone ⑲Watch parts
target workpieces ③Cylinder head cover ⑦Alternator ⑪Crankcase ⑮Camshaft ⑰Personal computer case ⑳Camera parts
● QT type : Uses a large QT table*, which enables large workpiece ④Cylinder brock ⑧Starter housing ⑫Cylinder head ⑱HDD parts Medical implants
machining or multiple parts machining
● FT type : Uses a large fixed table where large jigs can be loaded ●For safe use of our products, please read the Instruction Manual and Safety Manual before commencing operation. When using oil-based coolant oil or machining workpieces made of materials that may ignite(e.g. magnesium, resin) ,
take sufficient safety measures to prevent fire. Please consult our sales personnel if you have any questions.
● Improved chip discharge efficiency using the center trough structure ●When exporting this product, be sure to check the end user and their purpose of use from a security viewpoint. Approval from regulatory authorities may be required prior to export due to revision of laws and regulations or other
reasons. Please check with us before exporting the product.
and chip conveyor(optional) ●Secure 700 mm between machines as maintenance space.
●When exporting this product with the compound rotary table, the Ministry of Economy, Trade and Industry has deemed this export item to be “applicable listed items”. Please obtain required export permissions from the Ministry of
*QT table : Original high-speed 2-face pallet changer
Economy, Trade and Industry prior to export.
13 14
Machine Specifications Machine Specifications
X axis (inch)
mm (19.7)
500 (27.6)
700 (7.9)
200 X axis (inch)
mm (21.7)
550 (13.8)
350
Y axis (inch)
mm (17.7)
450 (7.3)
185 [+70
(2.8)
] Y axis (inch)
mm (15.7)
400 (9.8)
250
Travels Travels
Z axis (inch)
mm (16.1)
410 (9.8)
250 Z axis (inch)
mm (16.3)
415 (13.8)
350 (Including ATC80
(3.15)
)
Distance between table top Distance between table top (25.4)
645
and spindle nose end
(inch)
mm (9.8∼26.0)
250∼660 (9.1∼25.2)
230∼640 (4.7∼14.6)
120∼370 and spindle nose end
(inch)
mm (standard) (25.4)
645 (low)
, (34.1)
865 (7.9∼21.7)
200∼550
Table position time sec. — — Table position time sec. 3.4/180° — 2.3/180°
-1 -1 -1
12,000min specifications:12∼12,000 12,000min specifications:12∼12,000 16,000min specifications:16∼16,000
Spindle speed min-1 30,000min-1 specifications:30∼30,000 Spindle speed min-1
16,000min-1 specifications
(Optional)
:16∼16,000 16,000min-1 specifications
(Optional)
:16∼16,000 22,000min-1 specifications(Optional)
:22∼22,000
16,000min-1 specifications:MAX.6,000
Spindle Speed during tapping min-1 MAX.8,000 MAX.10,000 Spindle Speed during tapping min-1 MAX.8,000
22,000min-1 specifications(Optional)
:MAX.8,000
Tapered hole 7/24 taperd #30 7/24 taperd #15 Tapered hole 7/24 taperd #30 *9 7/24 taperd #30
(CTS)
Coolant Through Spindle Optional — (CTS)
Coolant Through Spindle Optional Ootional
Rapid traverse rate (inch/min)
m/min (2,756 × 2,756 × 2,756)
70 × 70 × 70 (1,575 × 1,575 × 1,772) Rapid traverse rate (inch/min)
m/min (2,756 × 2,756 × 2,756)
70 × 70 × 70
(XYZ-area)
40 × 40 × 45
(XYZ-area) (1,969 × 1,969 × 1,969)
50 × 50 × 50
Feed rate Feed rate
Cutting feed rate (inch/min)
mm/min X,Y,Z axis:1∼20,000
(0.04∼787) X,Y axis:1∼10,000(0.04∼394) Z axis:1∼20,000(0.04∼787) Cutting feed rate (inch/min)
mm/min X,Y,Z axis:1∼20,000
(0.04∼787) X,Y,Z axis:1∼20,000
(0.04∼787)
Tool shank type MAS-BT30 JBS4002∼15T Tool shank type MAS-BT30 *9 MAS-BT30
Main spindle motor 12,000min-1 specifications:11/6 Main spindle motor 12,000min-1 specifications:11/6 16,000min-1 specifications:7.4/4.9
(10min/continuous) *5
kW
16,000min-1 specifications
(Optional)
:10/7.3 30,000min-1 specifications:3.2/2.7 (10min/continuous) *5
kW
Electric Electric 16,000min-1 specifications
(Optional)
:10/7.3 22,000min-1 specifications
(Optional)
:11.2/6.4
motor motor
Axis feed motor kW X,Y,Z axis:1.3 X,Y axis:0.3 Z axis:1.0 Axis feed motor kW X,Y,Z axis:1.3 X,Y,Z axis:1.5
Power capacity 12,000min-1 specifications:14.5 Power capacity 12,000min-1 specifications:14.5 16,000min-1 specifications:9.5
(continuous) *6 kVA 30,000min-1 specifications:5.2 (continuous) *6 kVA
Power 16,000min-1 specifications
(Optional):15.2 Power 16,000min-1 specifications
(Optional):15.0 22,000min-1 specifications
(Optional):9.5
source source
Regular Regular
air pressure
MPa 0.4∼0.6 0.4∼0.6 air pressure
MPa 0.4∼0.6 0.4∼0.6
Air Air
supply supply
Required flow *7 L/min 180 70 Required flow *7 L/min 120 100
*1/Brother spec. is applied to pull stud for CTS. *2/When all tools are small tools(D55mm or less) . *3/The tool storage capacity, tool change time, etc., will vary when using large tools. The tool change *1/Brother spec. is applied to pull stud for CTS. *2/When all tools are small tools(D55mm or less) . *3/The tool storage capacity, tool change time, etc., will vary when using large tools. The tool change
time varies depending on the spindle type. *4/Actual tool weight varies according to the configuration and center of gravity; The figures shown here are for reference only. *5/Spindle motor output differs time varies depending on the spindle type. *4/Actual tool weight varies according to the configuration and center of gravity; The figures shown here are for reference only. *5/Spindle motor output differs
depending on the spindle speed. *6/These include 0.9 KVA for chip conveyor and 4.2 KVA for high-pressure coolant. *7/The required flow rate listed is the total flow rate when using the spindle air blast and depending on the spindle speed. *6/These include 0.9 KVA for chip conveyor and 4.2 KVA for high-pressure coolant. *7/The required flow rate listed is the total flow rate when using the spindle air blast and
coolant valve. *8/Measured in compliance with JIS B6201-1987 and Brother standards. Please contact Brother for details. *9/Acceleration must be adjusted for X and Y axes. *10/Tool change time coolant valve. *8/Measured in compliance with JIS B6201-1987 and Brother standards. Please contact Brother for details. *9/Please contact Brother for details of HSK and NC5 types. *10/This is value
measurement method is based on JIS B6336-9 and MAS011-1987. *11/Time when small tool is set. of BT spec. *11/Tool change time measurement method is based on JIS B6336-9 and MAS011-1987.
15 16
NC unit specifications
Standard NC functions Option list
Machining capability
Installation options Standard function
NC unit specifications
TC-22B TC-32BN TC-32BN
CNC model CNC-B00 Maximum command value ±9999.999mm, ±999.9999inch TC-20B TC-31B
TC-22B-O QT FT
Controllable axes (X, Y, Z, 2 additional axes)
TC-22B, TC-20B : 5 axes Display 12.1-inch color LCD display
Coolant unit 50L with valve and 180W pump
(X, Y, Z, 4 additional axes)
TC-32BN, TC-31B : 7 axes Memory capacity (Total capacity of program and data bank)
Approx. 10 Mbytes
with chip shower, valve and 180W
Simultaneously Positioning 5 axes
(X, Y, Z, A, B) External communication USB Interface (9pin)
*2 , RS232C 1 ch , Ethernet
controlled axes 100L with chip shower, valve and 250W + 250W pumps
(X, Y, Z, one additional axis)
Interpolation Linear : 4 axes No. of registerable programs (Total capacity of program and data bank)
1,024 programs 150L with chip shower, valve and 250W + 400W pumps
(X, Y, Z)*1
Circular : 2 axes Helical / conical : 3 axes Program format (changed by parameter)
NC language, Conversation with chip shower, CTS, valve and 250W + 400W + 650W pumps
Minimum setting unit 0.001mm, 0.0001inch, 0.001deg. Conversion from conversation program to NC language program available 250L with chip shower, valve and 250W + 400W pumps
Coolant tank
with chute 250L with valve and 250W + 400W pumps
*When program size is bigger than 2 Mbytes, machine works with extended memory operation. *Ethernet is a trademark or registered trademark of XEROX in the United States.
*1 and *2 : Helical/conical interpolation and USB interface are optional for some models. Please see the TC Option List.
チップコンベア装置 with chip shower, valve and 250W + 400W pumps
(CTS)
Coolant through spindle *1
Cleaning gun
Standard NC functions Manual pulse generator
Automatic door
● Absolute / incremental ● Computer remote (NC) (Conversation)
● Inch / metric ● High-accuracy mode A ● Expansion workpiece coordinate system ● Operation program Area sensor for automatic door
● Corner C / Corner R ● Tool length measurement ● Scaling ● Schedule program
● Coordinate rotation ● Tool life management / spare tool ● Mirror image ● Automatic tool selection Work light(one lamp)
● Synchronized tap ● Background editing ● Menu programming ● Automatic cutting condition setting
(two lamps)
● Coordinate system setting ● Graphic display ● Program compensation input ● Automatic tool length compensation setting
● Dry run ● Subprogram ● Tool length compensation ● Automatic tool diameter compensation setting Table light
● Restart ● Helical / conical interpolation ● Tool diameter compensation ● Automatic calculation of unknown number input
● Backlash compensation ● Automatic power off(energy saving function) ● Macro function(system variables) ● Machining order control (one lamp,two lamps,three lamps)
Indicator light
● Pitch error compensation ● Servomotor off standby mode (energy saving function) ● Local coordinate system Tool breakage detector
● Rapid traverse override ● Chip shower off delay ● One-way positioning
● Cutting feed override ● Automatic coolant off (energy saving function) ● Operation in tape mode Automatic lubricator
● Alarm history ● Automatic work light off(energy saving function)
(manual)
Grease lubricator
● Status log ● Automatic heat expansion compensation system, Ⅱ
● Machine lock (X,Y,Z axes)*3 (150mm/5.9inch)
High column spacer
Side door
Rotary joint
(inch3/min)
Cutting amount cm3/min : B-axis connection unit
(inch)
Cutting width mm ×
Tool diameter mm (inch)
× (inch)
Tool diameter mm × Cutting depth mm(inch) × Tool washing
Feed mm (inch) /rev Pitch mm(inch) Feed rate mm/min(inch/min)
Jig shower
ADC Cast iron Carbon steel ADC Cast iron Carbon steel ADC Cast iron Carbon steel Additional I/O board
D8×0.2 D8×0.2 D5×0.15 M8×1.25 M8×1.25 M5×0.8 32:16×1.0×2,000 32:16×1.0×2,000 Outer index switch
30,000min-1 ̶
(0.31×0.008) (0.31×0.008)(0.20×0.006)(5/16-18UNC)(5/16-18UNC) (10-24UNC) (2.0:0.62×0.039×78.7) (2.0:0.62×0.039×78.7)
Floppy disk drive unit
USB interface
TC-32BN QT FT
(on control board)
RS232C 9-pin to 25-pin conversion *2
ADC Cast iron Carbon steel ADC Cast iron Carbon steel ADC Cast iron Carbon steel
Manual tool unclamp unit
12,000min-1 D34×0.2 D28×0.15 D25×0.1 M27×3.0 M27×3.0 M20×2.5 1,440:100×4.8×3,000 160:40×7.0×573 116:40×6.0×484 Magazine turn switch
16,000min-1 (1.34×0.008) (1.1×0.006) (0.98×0.004) (1-8UNC) (1-8UNC) (3/4-10UNC)(87.9:3.94×0.19×118.1) (9.8:1.57×0.28×22.6) (7.1:1.57×0.24×19.1)
(PLC function, ladder editing,extension I/O board)
Built-in PLC
ADC Cast iron Carbon steel ADC Cast iron Carbon steel ADC Cast iron Carbon steel Switch panel (10holes) (6holes,10holes) (8holes) (9holes) (8holes)
D24×0.2 D22×0.15 D18×0.1 M22×2.5 M18×2.5 M14×2.0 660:100×2.2×3,000 73:40×3.2×573 48:40×2.5×484 Spindle air blast cleaning and air purge are standard equipped for all models. *1/High pressure specifications for TC-32BN and TC-22B *2/A 25-pin connector is provided on the operation panel. *3/Windows is a trademark or
16,000min-1 registered trademark of Microsoft Corporation in the United States and/or other countries.
(0.94×0.008) (0.87×0.006)(0.71×0.004) (7/8-9UNC) (5/8-11UNC) (1/2-13UNC)(40.3:3.94×0.09×118.1) (4.5:1.57×0.13×22.6) (2.9:1.57×0.1×19.1)
22,000min-1 D22×0.2 D20×0.15 D18×0.1 M16×2.0 M14×2.0 M12×1.75 450:100×1.5×3,000 57:40×2.5×573 39:40×2.0×484
(0.87×0.008) (0.79×0.006)(0.71×0.004) (5/8-11UNC) (1/2-13UNC) (7/16-14UNC)(27.5:3.94×0.06×118.1) (3.5:1.57×0.1×22.6) (2.4:1.57×0.08×19.1)
17
18