Professional Documents
Culture Documents
Individual
1 Comressive Strength ASTM C 140
Average
Individual
2 Density ASTM C 140
Average
Individual
Average
Individual
Average
Loadbearing concrete masonry units (Hollow Blocks, Solid Units, End Flangs)
Individual
1 Comressive Strength ASTM C 140
Average
1 Comressive Strength ASTM C 140
Average
Individual
2 Density ASTM C 140
Average
Individual
Average
Individual
Average
Cerbstone
# No. Tests Required Testing Standard
Average
Individual
Average
Test limits
the average linear shrinkage of the three units tested shall not
exceed 0.065 %
Test limits
the average linear shrinkage of the three units tested shall not
exceed 0.065 %
Test limits
min. 8000 psi [55 MPa]
Max 5%
Max 7%
ts shall have an exposed face area 0.065 m2 , and their overall length divided by
ckness shall be ≤4. The minimum specified thickness shall be 60mm. Measured
gth or width of test specimens shall not differ by more than 61.6 mm from
ecified dimensions. Measured thickness of test specimens shall not differ by
re than 63.2 mm from the specified dimension.
mens shall not have an average volume loss greater than 15 cm3 /50 cm2 . The average
ness loss shall not exceed 3 mm.