Professional Documents
Culture Documents
OWS Data Download
OWS Data Download
PC MONITOR
2 RX 2 TX
3 TX 3 RX
5 GND 5 GND
Data transfer from PC will not start until cable has been connected and monitor
has been configured into data transmission mode (See section 2.3.3.3.)
Program will now transfer all data stored on memory card. This process can take
some minutes, depending on amount of transmitted data and other factors. It is common
that, during communication process, transmission stops for a few seconds and continues
automatically. This occurs due to failures on transmission medium and protocol used.
If an error occurs, program will finish communication and inform to user. In this
case, check connections and configuration of serial port. Check also that monitor is on
transmission mode.
STATE
TABLE
EVENTS
GRAPHI
TABLE
DESARROLLOS TECNICAS INDUSTRIALES DE GALICIA, SA (DETEGASA) LA CORUÑA, SPAIN Page 71 of 63