Professional Documents
Culture Documents
Project Report
Binding Specifications:
The dimension of the project report should be in A4 size. The project report should be
bound using flexible cover of the thick blue art paper or hard bound. The cover should be
printed in black letters and the text for printing should be identical.
Chapters
Introduction,
Theory Related to Project,
Implementation (Hardware/ Software, Block diagrams, Flow charts etc)
Results & Conclusion
Each chapter may be further divided into several divisions and sub-divisions. Each chapter
should be given an appropriate title. Tables and figures in a chapter should be placed in
the immediate vicinity of the reference where they are cited.
Appendices
Appendices are included to give supplementary information, which is not included in the
main text to avoid distraction from the central theme. Appendices should be numbered using
Arabic numerals, e.g. Appendix 1, Appendix 2, etc. Tables and References appearing in
appendices should be numbered and referred to at appropriate places just as in the case of
chapters. Appendices shall carry the title of the work reported and the same title shall be
made in the contents page also.
References
i
1. V.S. Petrovic and C. S. Xydeas, “Gradient based multi-resolution image fusion,”
IEEE Transaction on Image Processing, Vol. 13, No.2, pp. 228-237, 2004
2. Sanjit K. Mitra, “Digital Signal Processing”, Tata Mc-Graw Hill, 3rd edition, 2006.
Typing Instructions:
The impression on the typed copies should be black in colour. All text except headings in
Chapters will be justified. One and a half spacing should be used for typing the general
text. The general text shall be typed in the Font style ‘Times New Roman’ and Font size 12.
The headings of all sections will be 14 point Bold and headings of all sub-sections will be 12
point Bold. Chapter Headings will be 16 point Bold and centralized.
ii
<TITLE OF PROJECT>
A
PROJECT REPORT
BACHELOR OF ENGINEERING
IN
SUBMITTED BY:
NAME OF STUDENT(S)
ROLL NO.
SEVNETH SEMESTER
iii
UNIVERSITY INSTITUTE OF ENGINEERING AND TECHNOLOGY,
CANDIDATE’S DECLARATION
I hereby certify that the work presented in the Project entitled “Title of Project” in partial
fulfillment of the requirement for the award of the degree of Bachelor of Engineering in
Electronics and Communications Engineering from University Institute of Engineering and
Technology, Panjab University, Chandigarh, is an authentic record of my own work carried
out under the supervision and guidance of (Name(s), Designation of supervisors).
CERTIFICATE
This is to certify that the above statement made by the candidate is correct to the best of my
knowledge and belief.
iv