Professional Documents
Culture Documents
Total Pages : 4
BT-6/M-21 46188
DESIGN OF STEEL STRUCTURES-II
Paper–CE-302A
UNIT–I
1. (a) Determine shape factor for symmetric I-section. Also,
calculate moment of resistance of the cross section
corresponding to the strain distribution specified.
Section Details Strain Distribution
Flange c/s : 300 mm × 20 mm Max. Strain : 0.003
Web c/s : 400 × 20 mm Yield Strain : 0.0012
(b) Carryout plastic analysis of frame structure shown in
Fig. 1. Load Factor = 1.5.
20 kN/m
C Mp D
3m 0.75 Mp 3m
0.75 Mp
40 kN B E
2m
A
5m
Fig. 1.
46188//KD/1269 [P.T.O.
2. Analyse and design three span continuous beam
supporting UDL of 50 kN/m by providing economical cross
section. Also apply the necessary checks.
Wu = 50 kN/m
A D
B C
6m 4m 4m
Fig. 2.
UNIT–II
n Load on Max. C0 Cc Ct ft
each Shear
column
4 W/4 W/8 -0.03415 +0.01762 0.00530 19°12'
6 W/6 W/12 -0.01482 +0.00751 0.00151 12°44'
8 W/8 W/16 -0.00827 +0.00416 0.00063 9°33'
10 W/12 W/24 –0.00365 +0.00190 0.000185 6°21'
Fig. 3.
46188//KD/1269 2
UNIT–III
Fig. 4.
UNIT–IV
46188//KD/1269 3 [P.T.O.
8. Deign a beam column subjected to a factored axial load of
400 kN and a factored bending moment of 60 kNm at the
fixed end. The other end of the beam column is hinged. The
unsupported length of the beam column is 4 m.
46188//KD/1269 4