INTRODUCTION SIGNIFICANCE OF THE STUDY Nearly 2000 fire incidents were The said project aims to contribute reported in the first three months of 2023, to the understanding of how to effectively according to the Bureau of Fire Protection prevent internal appliances from (BFP). According to a BFP spokesperson, overheating in order to prevent man-made such incidents are frequently caused by fire disasters, whether mechanical or faulty electrical wiring associated with internal. appliances. Though the BFP has long advocated for responsible electricity use, the risk of appliance fires has persisted for OBJECTIVES OF THE STUDY: decades. - Assess possibility of controlling fires via internal temperature sensors Such number of accidents has - Explore underlying factors inspired Appliance Saver, a reliable, and contributing to faster and frequent simple device intended to reduce overheat appliance mishaps everywhere. - Formulate recommendations on how to effectively lessen appliance explosions in the long run STATEMENT OF THE PROBLEM The goal of Appliance Saver is to reduce appliance explosions, which are METHODOLOGY common due to environmental factors such a. Research Locale as the year-round hot climate and overuse. The study is to be conducted One of these explosions causes human and at one of the researcher’s houses. material casualties in a home, which can Wherein the effectiveness of the spread to a community. temperature sensor is tested. Observation of an appliance overheating is also expected. HYPOTHESIS b. Research Design (a) Appliance Saver prevents appliance This is a Qualitative Research overheat mainly using the temperature as an (b) Appliance Saver does not prevent indicator to turn appliances off. It appliance overheat also includes data on how reliable it (c) Appliance Saver is lowly effective to is. prevent an appliance explosion c. Sampling (d) [Appliance Saver is moderately The robot will show how effective to prevent an appliance consistent it can successfully cut off explosion the electricity and how well the (e) Appliance Saver is highly effective to sensor senses hot temperature in prevent an appliance explosion different forms of matter. d. Materials ● Heat sensor (Thermistor) ● Arduino ● Resistor ● Breadboard APPLIANCE SAVER Torda, Embarque, Ong, Concepcion, Bernardo, Velasco ● Jumper wires ● LCD display ● Pressure sensor ● Servo motor ● Servo Extensions e. Procedure (step by step) The Arduino will be bought at a local electronics shop along with the Thermistor, Resistor, Breadboard, Resistors, Servo motor, Servo extensions and Jumping wires. But the LCD display will be bought online. After all materials are bought, the contraption to be put on the outlet is to be built first. Using an Arduino, Breadboard, Jumper Wires, Servo motors, Servo Extensions, Pressure sensor, and a plastic material. Then the Commander, the device that will be put on the appliance will be made using the Temperature sensor, LCD display, Jumper Wires, Breadboard, and an Arduino. Then finally connect the two together with a wire that is coded to send the information from the Commander to the outlet device. The outlet device will be place on the outlet and the Commmander on a region in your appliance that radiates heat. Once the Commander senses the temperature go beyond the limit, it will send a signal for the outlet device to unplug the appliance.