Professional Documents
Culture Documents
Exceptional Clarity
Weatherproof Hardware
Long-Term Reliability
MSL-10A
High Power
Loudspeaker
Applications
System
Paging and Announcing
Stadiums
Racetracks
Large-Scale Touring
Concert Reinforcement
Front View
Rigging
points
High frequency
driver service Hatch handle
access
Environmental power
indicator
Speaker
connector Environmental power
Serial number connector
plate
Rear View
The MSL-10A Loudspeaker cabinet is sions have been optimized for maximum
fortified for long-term reliability in outdoor linearity, resulting in extremely low
installations, and is thoroughly inspected at harmonic distortion and consistent sonic
several stages during assembly. Con- accuracy at all dynamic levels. Ferrofluid
structed of high-grade Finnish birch cooling and back-vented gaps and pole
hardwood, the enclosure is resin-impreg- pieces maximize power handling, and
nated in critical areas, bonded with water-resistant treatment of all driver
structural epoxy adhesive, and coated with elements ensures greatest reliability in
a finish that tolerates cabinet swelling outdoor installations. Gold-plated contacts
without cracking. Thermostatically- and stainless steel mounting hardware
controlled environmental heating and resist corrosion.
cooling systems, which receive power from Rigorous Testing
the MSL-10A Rack, ventilate the cabinet
The M-10A Control Electronics and
and stabilize its interior temperature.
MSL-10A Loudspeaker components are
The MSL-10A cabinet is internally
individually and fully tested at several
damped and braced for maximum energy
stages of manufacture to ensure maximum
transfer and highly intelligible reproduc-
reliability and minimum component
tion of voice and music — which is
failure.
especially important in acoustically difficult
Each driver is subject to an eight-hour
environments. Internal and external steel
dynamic burn-in to test for power handling
bracing and integral all-steel rigging points
and peak excursion performance, and
ensure safe, efficient installation, and
thorough computer-based testing prior to
integral forklift brackets ease handling.
shipment ensures optimal system operation
Component Quality and Linearity upon installation.
The MSL-10A Loudspeaker employs Finally, the MSL-10A System has
driver components whose design, construc- undergone years of field testing in stadium
tion, and testing have been proven in over a installations and touring reinforcement,
decade of demanding professional use. The resulting in a mature, refined technology
transducer magnetic circuits and suspen- that offers unmatched performance.
Acoustical System1
Frequency Response2 70 Hz - 16 kHz ±4 dB
Maximum SPL at 100 feet
Continuous 110 dB
Peak 120 dB
HF Coverage, -6 dB points
Horizontal 60 degrees
Vertical 40 degrees
MSL-10A Loudspeaker (one 30° section)
Driver Complement (4) MS-12 12-inch cone drivers
(3) MS-2001 2-inch horn drivers
HF DC Protection 50 µf polypropylene capacitor
Enclosure Vented, horn-loaded, 12-ply hardwood
Finish Weatherproof black coating Notes:
Protective Grill Three-piece expanded metal screen, damped 1. Acoustical specifications
Rigging Eight points, 3/4 inch rigging holes in steel cradle are given for the minimum
Dimensions 41" W x 85" H x 35" D configuration of two 30°
sections.
Weight 700 lbs (318 kg)
2. Measured 100 feet on axis,
Power Requirement 200–240 VAC, 3A (heater and fan supply)
half-space conditions,
Connectors Pyle with weather cap, heavy-duty AC in, weather pink noise input, in third-
protected octave bands.
Arraying and Rigging
Do Not Lift
or Hang by
Upper Fork
Lift Feet
Spacer/Hanger Bar
Left: Top View
Right: Side View
113"
(approx.) 80.25" radius
Long-Throw Configuration
(approx.)
20° Vertical Coverage
60° Horizontal Coverage
Ring Configuration
As shown at left, twelve MSL-10A
cabinets arrayed horizontally form a
complete ring providing 360-degree
horizontal coverage.
This system produces prodigious
sound pressures in a reasonably
compact package (80.25" radius), and
is effective for large scale concerts in-
the-round or sporting events in very
large stadiums. Where required,
additional cabinets may be added
vertically, as shown above, to increase
the throw for any portion(s) of the
Ring Configuration total arc.
360° Horizontal Coverage
MSL-10A Rack System
Signal Input
Loop Output
M-10A Control Rack System Features:
Electronics Unit
• Integrated signal process-
ing includes optimized
active crossover, ampli-
High Amplifier tude and phase correc-
tion, and driver protection
circuitry to maintain safe
MS 10 Power operating levels
Low Amplifier 1
Amplifiers • Modular amplifier rack
includes control electron-
ics, amplifiers and
Low Amplifier 2 interconnection panel for
easy interface with
speaker system
50A Power Switch/
I/O Panel • Input/Output unit provides
Circuit Breaker
power switch and circuit
breaker for entire system;
protection and power
distribution to the CEU,
Power Indicator
amplifiers, and loud-
speaker; and loudspeaker
and external power
Mains Power Cable connections
Loudspeaker Cable • Completely engineered
Environmental Power Cable and ready to install
extended range.
Sound
engineering
for the art
and science
of sound.