Professional Documents
Culture Documents
CATALOG 2022-2023
Hydraulic
Butt Fusion
Manual
Butt Fusion
Electrofusion
Socketfusion
ABOUT US
HDPE Pipe Welding Machines
POLYMOLD PRODUCTS
was established in 1971
by Raj Sampat. It is now
managed by his son, Mr
Sachin Sampat who has
been in charge since 1995.
2
TABLE OF CONTENTS
3
HDPE PIPE WELDING
AS PER IS 7634 and DVS2207 Part 1
BUTT FUSION
Fusion or welding of HDPE Pipes
via HEAT and PRESSURE.
1. The ends of the pipes are trimmed using a rotating cutter (TRIMMER) to re-
move all rough ends , dirt, mud ,dents and oxidation layers. The trimmed end
faces must be square and parallel. Upto 75mm of pipe must be cleaned from the
inside and outside using isopropyl alcohol.
2. The ends of the PE pipes are heated by contact under pressure against a
HEATER PLATE. The Teflon coated heater plates must be clean and free from
contamination and maintained within 200~220 °C . Contact is maintained until
even heating is established around the pipe ends, and the contact pressure then
reduced to a lower value called the heat soak pressure. Contact is then main-
tained until the appropriate heat soak time elapses.
3. The heated pipe ends are then retracted, and the heater plate removed.
The heated PE pipe ends are then brought together and pressurised evenly to
the welding pressure value. This pressure is then maintained for a period to al-
low the welding process to take place, and the fused joint to cool down and thus
the joint formed is stronger than the original pipe. During this cooling period the
joints must remain undisturbed and under compression. Under no circumstances
should the joints be sprayed with cold water or any cloth applied to the joint.
4
ELECTRO FUSION MACHINE
& Tools
Made in India
5
Publication Date
6
MANUAL WELDING MACHINE
Technical Specifications Model No 160 HDL 2 Clamps Model No 200 HDL 2 Clamps
7
HDPE PIPE WELDING MACHINES –Manual
8
HDPE PIPE WELDING MACHINES –Manual
Technical Specifications Model 160 HDY 2 Clamps Model 200 HDY 2 Clamps Model 250 HDY 2 Clamps
9
HDPE PIPE WELDING MACHINES
HDC Series— HYDRAULIC MACHINES
10
HDPE PIPE WELDING MACHINES
HDC Series— HYDRAULIC MACHINES
WELDING as per
INTERNATIONAL & INDIAN STANDARDS
11
HDPE PIPE WELDING MACHINES
FITTING FABRICATION MACHINE
With Training to weld
HDPE PIPES the correct
way as per IS 7634
And DVS2207-1
WELDING TO MATCH
INTERNATIONAL
STANDARDS
12
PPR WELDING MACHINES
SOCKET WELDING
Technical Specifications Model 160 PPR
13
HDPE PIPE CUTTING MACHINES
ANGULAR PIPE CUTTING MACHINE
14
HDPE PIPE WELDING HEATERS
TEFLON COATED DIGITAL & ANALOG HEATERS
DIGITAL HEATER
ANALOG HEATER
15
Contact Us
WE CURRENTLY EXPORT TO
AUSTRALIA, BANGLADESH, BHUTAN, BAHRAIN, NEPAL,SRI LANKA, I
NDONESIA, SINGAPORE, MALAYSIA, HONG KONG,FIJI, THAILAND,SPAIN,
ITALY, UK ,PORTUGAL, UAE, QATAR, KUWAIT, OMAN, YEMEN,
NETHERLANDS, ZAIRE, MADAGASCAR, NIGERIA, KENYA, SAUDI ARABIA,
ISRAEL, TANZANIA, KAZAKHSTAN, PERU , CANADA ,QATAR, MEXICO &
UNITED STATES OF AMERICA
FACTORY ADDRESS :
PLOT NO 2, ARKOSE INDUSTRIAL AREA,
TAKAI ADOSHI ROAD, VILLAGE SAJGAON,
TALUKA KHALAPUR, DISTRICT RAIGAD
KHOPOLI, MAHARASHTRA STATE
INDIA PINCODE 410203
OFFICE ADDRESS
210/211 AMIR INDUSTRIAL ESTATE,
SUNMILL COMPOUND
SENAPATI BAPAT ROAD,
LOWER PAREL WEST,
MUMBAI 400 013. INDIA
EMAIL : polymold@gmail.com
WEB : www.polymoldproducts.com
MOBILE : +91– 9820949802
+91-- 9920949802
CONTACT PERSON : MR SACHIN SAMPAT
MR MARUTI DESAI
16