Professional Documents
Culture Documents
Q1)
Apply mesh analysis to the below circuit and find the currents through all the resistors.
Q2)
Find the power dissipated in the circuit and the power delivered by the sources using mesh
analysis for the circuit given.
1
EE1101 CIRCUITS AND NETWORK ANALYSIS WEEK 5 ASSIGNMENT
Q3)
Solution of the circuit implies finding the currents and voltage across all the circuit elements.
Find the circuit solution using mesh analysis.
Q4)
Apply mesh analysis and find the circuit solution.
Q5)
Express the resistor currents as linear combination of 𝑉1 and 𝑉2in the circuit using mesh
analysis.
2
EE1101 CIRCUITS AND NETWORK ANALYSIS WEEK 5 ASSIGNMENT
Q6)
Can the circuit given below be solved uniquely? If yes, find the solution. If no, find at least
two solutions.
Q7)
Solve the circuit using mesh analysis.
3
EE1101 CIRCUITS AND NETWORK ANALYSIS WEEK 5 ASSIGNMENT
Q8)
Find the current delivered to the 12.5V source, power delivered by all sources and power
dissipated in all the resistors by mesh analysis for the circuit.
Q9)
All the resistors in the circuit are of 2Ω. Find the currents in the resistors and the voltage
across current sources by mesh analysis.
4
EE1101 CIRCUITS AND NETWORK ANALYSIS WEEK 5 ASSIGNMENT
Q10)
i) Express V in the circuit as a linear combinations of 𝑉1, 𝑉2 and I.
ii) Find I such that V = 0, if 𝑉1=𝑉2=5V.
iii) Solve the circuit completely with these source values.
Use only mesh analysis.
Q11)
Express all the resistor currents in the directions marked in the form of linear combination of
𝑉1, 𝑉2 and 𝑉3 for the circuit given using mesh analysis.
5
EE1101 CIRCUITS AND NETWORK ANALYSIS WEEK 5 ASSIGNMENT
Q12)
The mesh resistance matrix of the circuit is given below. Find the values of all the resistance
in the circuits.
[z]*[I] = [U] where U is the independent sources matrix
I is the mesh currents variable matrix
Z is the mesh resistance matrix.
14 −4 −6
Z = [−4 12 −3]
−6 −3 13
Q13)
Calculate Voltage across the 2mA source.
6
EE1101 CIRCUITS AND NETWORK ANALYSIS WEEK 5 ASSIGNMENT
Q14)
Determine current in 5 ohm resistor.
Q15)
Calculate the Voltage across 25 ohm resistor.
Q16)
Determine the power delivered by the 2 A current source.
7
EE1101 CIRCUITS AND NETWORK ANALYSIS WEEK 5 ASSIGNMENT
Q17)
A 25 Ω resistance has a voltage v = 150 sin 377t (V).
Find
a. power P
b. Average power Pavg over 0 to π.
𝑡
Whereas, 𝑃𝑎𝑣𝑔 = ∫0 𝑃𝑠𝑖𝑛(𝛼)𝑑𝛼
Q18)
Determine the voltage across the 2mA.
Q19)
Consider the Two phase system.
and
and
Calculate the Total instantaneous power from source to load.
8
EE1101 CIRCUITS AND NETWORK ANALYSIS WEEK 5 ASSIGNMENT
Q20)
The power consumption of a certain household in 1 day.
Find
(a) the total energy consumed in kWh
(b) the average power per hour.
Q21)
Redraw the circuit indicating all the branch currents
Q22)
Find all node voltages v1 v2 v3 v4 v5 v6 v7 v8
9
EE1101 CIRCUITS AND NETWORK ANALYSIS WEEK 5 ASSIGNMENT
Q23)
Find out the branch currents (I1 and I2) for the loops using Mesh analysis
Q24)
Find out the currents (I1, I2, I3) for the loops using Mesh analysis
Q25)
Find out the currents (i1 to i5) for the loops using Mesh analysis
10
EE1101 CIRCUITS AND NETWORK ANALYSIS WEEK 5 ASSIGNMENT
Q26)
Find out the currents (i1 to i5) for the loops using Mesh analysis
Q27)
Find out the currents (i1 to i4) and voltages V2, V3 for the loops using Mesh analysis
Q28)
Solve the circuit by mesh analysis and find the current Ix and the voltage across R2
11
EE1101 CIRCUITS AND NETWORK ANALYSIS WEEK 5 ASSIGNMENT
b)
12
EE1101 CIRCUITS AND NETWORK ANALYSIS WEEK 5 ASSIGNMENT
Q30)
Using Mesh analysis to find V3 and Current i1 in the circuit below?
Q31)
Solve the circuit below and find i1 to i4 using super mesh analysis.
Q32) Find the Voltages and currents of 30-Ω, 50- Ω, and 60- Ω resistors in the network
using mesh analysis
13