Professional Documents
Culture Documents
Menkaurekarkoto
Menkaurekarkoto
Menkaure bracelet
minta: Monper Gyöngybolt- Farkas Kati
pattern: Monper Beadshop – Kati Farkas
3. Vegyél fel egy 3mm csiszolt gyöngyöt és ölts bele a szemközti 11/0 kásába.
Pick up a 3mm fire-polished bead and put it in the opposite 11/0 seed.
4. Majd vissza a csiszolt gyöngybe a 11/0 kásán keresztül. Lényeg, hogy a csiszit a kása két oldalán
rögzítsd le.
Then go through the fire-polished bead. It is important to secure the fire-polished bead on both
sides of the seeds.
7. Haladj így körbe. Menj körbe még egyszer, hogy szoros legyen.
Go around like this. Go around on them again to make it tight.
8. Ölts le a Superdo másik szabad lyukába.
9. Ahol Superdo van felül oda 2x3mm csiszolt fánkot vegyél fel. Ahol pedig 11/0 kása van felül,
oda egy Superduo-t vegyél fel.
Where Superdo is on top, pick up a 2x3mm polished donut bead. And where there's an 11/0
seed bead, pick up a Superduo.
10. Így haladj körbe (fánk, Superduo), majd menj. körbe még egyszer, hogy szoros legyen.
So go around like this (donut, Superduo) and then go around again to make it tight.
11. Az egyik Superduo-ból kiindulva ölts a Superdo másik, szabad lyukába. Vegyél fel 7db 11/0
kását, ölt a Superduo szabad lyukába.
Starting from one Superduo, get it into another free hole in the other Superdo. Pick up 7pcs 11/0
seed bead, stitch it into the free hole of the Superduo.
12. Összevarrás – vegyél fel 3db kásagyöngyöt, ölts a másik egység 4 kásájába, majd vegyél fel 3
darab kását és vissza a Superduo szabad lyukába.
Sewing together - pick up 3 seed beads, stitch them in to the 4 seed beads of the other unit,
then pick up 3 pieces of seed bead and return to the free hole in the Superduo.
13. Menj körbe még egyszer, hogy erős legyen. A lényeg hogy egy ”X” alakzatban kapcsolják össze
a kásák az egységeket.
Go around again to make it tight. This is important to make the seeds connect the units in an “X”
formation.
14. A kapocs felhelyezése – Superduo-ból kiindulva vegyél fel 7db kásagyöngyöt és rögzítsd a
kapcsot, menj vissza a szemközti Superduo szabad lyukába. Menj körbe többször.
A karkötő 17cm csuklóméretre készült, amennyiben nagyobbra van szükséged több egység
megfűzésével, vagy plusz díszítéssel bővítheted.
Attaching the clip – pick up 7 sead beads starting from Superduo, fasten the clip amd go back to
the free hole of the opposite the Superdo. Go around multiple times.
The bracelet is made for a wrist size of 17cm, if you need larger, you can add more units
or additional decoration.
http://www.gyongyom.hu