Professional Documents
Culture Documents
Summary
n OriginPro, the Peak Analyzer is capable of performing multiple peak fitting with several baseline subtraction options.
here are various ways to create a baseline for your spectrum data. You can select a few anchor points and then fit them
ith a function. The fitting of the baseline can be done along with the peak fitting.
Steps
1. Start a new worksheet and import the file <Origin Program Folder>\Samples\Spectroscopy\Peaks on Exponential Baseline.dat.
3. Select Analysis: Peaks and Baseline: Peak Analyzer from the main menu to open the Peak Analyzer.
4. Select the Fit Peaks radio button in the Goal group on the first page. Click Next to go to the Baseline Mode page.
5. In the Baseline Mode page, select User Defined from the Baseline Mode drop-down list. Click the Find button in the Baseline Anch
Points group. Eight anchor points should be found.
Image:Baseline_Anchor_Points.png
6. In the Create Baseline page, select Fitting with the Connect By drop-down list. In the Fitting group, select ExpDec2 from the Funct
drop-down list. Click Next to go to the Baseline Treatment page.
7. In the Baseline Treatment page, select the Fit Baseline with Peaks check box. Click Next to go to the Find Peaks page.
8. In the Find Peaks page, click the Find button to search peaks. Two peaks should be found.
ttp://qhwiki.originlab.com/~originla/howto/index.php?title=Tutorial:Peak_Fitting_with_Baseline 2012/11/21
utorial:Peak Fitting with Baseline - Howto Wiki Page 2 of 2
Image:Two_peaks_are_found.png
9. In the Fit Peaks page, click the Fit Control button to open the Peak Fit Parameters dialog.
10. In the Peak Fit Parameters dialog, make sure that both peak types are Gaussian. Click the Fit Until Converge button. When the fittin
done, click OK to close the dialog.
11. Back in the Fit Peaks page, click Finish to complete the analysis. See the results in the source workbook and the graph report.
ategories: Peak Fitting (Tutorials) | DuPont Training | Peaks and Baseline | P3 | Training Manual
ttp://qhwiki.originlab.com/~originla/howto/index.php?title=Tutorial:Peak_Fitting_with_Baseline 2012/11/21