Professional Documents
Culture Documents
TLE
ICT - ILLUSTRATION 8
Exploratory
Republic Act 8293, section 176 states that: No copyright shall subsist in
anywork of the Government of the Philippines. However, prior approval of the
government agency or office wherein the work is created shall be necessary for
exploitation of such work for profit. Such agency or office may, among other things,
impose as a condition the payment of royalty.
Borrowed materials (i.e., songs, stories, poems, pictures, photos, brand
names, trademarks, etc.) included in this book are owned by their respective
copyright holders. Every effort has been exerted to locate and seek permission to
use these materials from their respective copyright owners. The publisher and
authors do not represent nor claim ownership over them.
Published by the Department of Education – Division of Lanao del Norte
Schools Division Superintendent: Edilberto L. Oplenaria, CESO V
Development Team of the Module
Writer/s: Jenifer O. Patagoc/ Lala Proper Integrated School
Illustrator and Layout Artist: Lito P. Rosalijos Jr.
Proofreader, In-House Content and Language Editors: Genevieve E. Cruz/ LRMDS
Management Team
Chairperson: Dr. Arturo B. Bayocot, CESO III
Regional Director
COVER PAGE
COPYRIGHT PAGE
TITLE PAGE
TABLE OF CONTENTS
Lesson 2 –
Key Answer 9
References 10
Lesson LO 2: Use and maintain hand tools,
2 measuring instrument and equipment
A continuation of lesson 1, this lesson will give the learners the knowledge on the
proper way of keeping, cleaning and using the hand tools, measuring instrument and
equipment to preserve and maintain it in good condition.
This lesson is about to identify the following:
LO 2. Use and maintain hand tools, measuring instrument and equipment
After completing this module, you are expected to:
1. Appreciate safety procedures in using and cleaning hand tools and equipment
2. Identify safety procedures in using and cleaning hand tools and equipment
Guide questions:
1. What are the safety procedures in using and cleaning hand tools and equipment?
2. How to perform the safety procedure?
3. When to perform the safety procedure?
4. What are the possible malfunction, unplanned or unusual events and
report to property custodian?
5. What are the benefits of following safety procedure?
6. What are the benefits of proper storage of hand tools and equipment?
What I Know
Pre- Assessment
Direction: Read carefully the following statements below. Identify which is a safety
procedure in maintaining hand tools or NOT. Have your answer in a table, Just copy the
answer, do it in your activity notebook.
Make sure you have all the materials you need in one place.
eat or drink while using your drawing materials to concentrate
Avoid dropping your tools and equipment.
Never use measuring tools in cutting paper.
Wipe off the surface and edges of your measuring tools.
Have a one container for your tools.
Keep your drawing sheets in a plastic tube to protect them from a dust and dirt.
Avoid dropping your tools and equipment.
Place your tools anywhere near your working area
Sharpen pencil and store properly after use
Safety Procedure Not Safety Procedure
What’s In
True / False
Directions: Write true if the statement is true and false if it is false. Write your answer in the
activity note book.
1. notify the purchasing department of descriptions discovered;
2. check quantities received against the shippers packing list if all are
accounted
3. identify goods received with descriptions on the purchase order
4. Inventory is an idle stock of physical goods that contain economic value
5. identify goods received with descriptions on the purchase order
6. prepare only one receiving report for receiving department copy
7. The purchasing department will notify the receiving department of any
damage in transit
8. Arrange for inspection when necessary.
9. unload and unpack incoming materials and carefully check quantities
received against the shippers packing list
10. Observe safety in all times.
What’s New?
Directions: Choose the letter of the correct answer. Write your answer in your activity
notebook.
2. What is the most common cleaning material for your drawing tool?
A. Clean Clothe C. spray with water
B. Brush D. Oil
3. After the drawing, how will you clean the eraser and rub?
A. Using the cleaner, spray the cloth and wipe down black smudge
B. rubbing the eraser against a clean piece of paper until the black smudge has
disappeared
C. Run your hands through your eraser to remove any loose black smudge.
D. None of the above
What is It
In preparation for the required task students should plan, prepare and observe
safety in all times. Efficiency and safety of the work produce accuracy in drawing. And also
according to Occupational safety and health - a cross-disciplinary area concerned with
protecting the safety, health and welfare of the people engage in work or employment. As a
secondary effect, it may also protect the co-worker, family members, employers, customers,
suppliers nearby the communities who are affected by the workplace environment Safety
standards are standard design to ensure the safety of the products, activities, or process
and others.
Safety procedure in maintaining hand tools
It is essential to take proper care of the hand tools, materials, and equipment. The
safety procedure ensure the correct setting of standards procedure and accuracy of the
drawing. Also to prolong the life and usability of your tools. It is to prepare the illustrator to
do the work efficient, productive and safe. With this, the following consideration are given
importance. Below are some tips to properly use and take care of them.
Make sure you have all the materials you need in one place. Accidents can occur
when you're hurriedly looking for something or leave the room to get something
you've forgotten.
Arrange all your tools near you. Spreading things out in a semi-circle usually works
well.
Don't eat or drink while using your drawing materials.
Avoid dropping your tools and equipment.
Never use measuring tools in cutting paper.
Wipe off the surface and edges of your measuring tools.
Sharpen and store your pencils properly after use.
Have a separate container for your tools.
Keep your drawing sheets in a plastic tube to protect them from a dust and dirt.
What’s More?
Direction: Read the situation carefully. Identify if the safety procedure in maintaining hand
tools is execute, draw a smile ( ) if NOT write one to two sentences about proper safety
procedure that must be executed in the situation. Write your answer in the activity note
book.
1. Rose wanted to cut her colored paper into 4 parts. She can’t fine any scissors so she use
here triangle in cutting the colored paper to make the cut straight.
_________________________________________________________________________
2. Harry’s work is done. He roll up his drafting papers into a tight roll. Secured it with a
rubber band at each end and Place the roll into a drafting tube for safe keeping.
_________________________________________________________________________
3. Illustrator can clean most hand tools with a simple wipe down using a rag. If they are dirty
use some soap and water to wash them off.
_________________________________________________________________________
4. Joseph keep all the major tools and drawing paper together in a portable carrying pouch.
_________________________________________________________________________
5. Maria a grade 8 illustrator wanted to clean the eraser by washing it with water and soap
and dry it with clothe.
_________________________________________________________________________
What I Can Do
Direction: Observe the common household chores your parents done at home. Create a list
of safety procedure observe and cleaning methods done by your parents while doing the
household chores. Form the list make a brief paragraph that explain the importance of
safety procedure and proper cleaning in relation to Illustration.
POST TEST
Directions: Identify the following. Write the word Safety if the statement is about safety
procedure, Clean if it is about proper cleaning of illustration tools and equipment, and
Benefits if it is about the good result of proper cleaning and safety. Write your answers in
your activity notebook.
4. Roll up your drafting papers into a tight roll. Secure them with a rubber band at
each end.
5. Productivity is increased because time is not wasted looking for tools and
equipment.
6. Make sure you have all the materials you need in one place.
7. Tools are properly stored, cleaned, and well maintained will save you time and
money
8. Don't eat or drink while using your drawing materials.
9. Never use measuring tools in cutting paper.
10. Run your hands through your brush to remove any loose debris
MULTIPLE CHOICE:
Directions: Write the letter of the correct answer in your activity notebook
1. What is the most common cleaning material for your drawing tool?
A. Clean Clothe C. spray with water
B. Brush D. Oil
2. After the drawing, how will you clean the eraser and rub?
A. Using the cleaner, spray the cloth and wipe down black smudge
B. rubbing the eraser against a clean piece of paper until the black smudge has
disappeared
C. Run your hands through your eraser to remove any loose black smudge.
D. None of the above
ADDITIONAL ACTIVITY
Direction: Form the previous activity (what I can do) think and make a list of the tools,
materials and equipment used in observing safety and proper cleaning in illustration? The
list of tools, materials and equipment will be used for the next module.
ANSWER KEY
PRE-TEST
Safety Procedure Not Safety Procedure
Make sure you have all the Eat or drink while using your
materials you need in one place. drawing materials to concentrate
Avoid dropping your tools and Have a one container for your
equipment. tools
Never use measuring tools in Place your tools anywhere near
cutting paper. your working area
Wipe off the surface and edges of
your measuring tools.
Keep your drawing sheets in a
plastic tube to protect them from a
dust and dirt.
Avoid dropping your tools and
equipment.
Sharpen pencil and store properly
after use
https://www.slideshare.net/judiejudss/lesson-4-maintain-hand-tools-equipment-and-
paraphernalia-233903974?qid=7b82077a-621f-4cba-a244-
71372ccf07c1&v=&b=&from_search=1
https://www.mustangbols.com/animation-2d/maintain
https://www.familyeducation.com/fun/crafts-kids/rules-safe-crafting
https://steemit.com/art/@steemph.cebu/drafting-materials-and-their-
propermaintenance-orsteemph-cebu-s-5th-art-guide
https://www.slideshare.net/lynettealcaide/procedures-in-receiving-and-storing-tools-
andmaterials
https://homesteady.com/12170358/how-to-take-care-of-drafting-tools
https://lowellcorp.com/properly-maintaining-your-tools/
14