You are on page 1of 2

Single-User (1 Computer) License Agreement

Please read carefully; this is a legal End-User License Agreement (EULA) between you (the end user) and Gamma
Design Software, LLC (“Gamma Design Software”). When you install this software on your computer you signal your
agreement to be bound by the terms of this agreement, including the Software License and the Limited Warranty. If
you do not agree to be bound by the terms of this agreement, do not install the software and return the package
together with accompanying written material to Gamma Design Software at the address below for a full refund.

1. Gamma Design Software retains ownership of the GS+ program enclosed. Gamma Design Software gives
you (the end user) the right to use a single copy of GS+ on a single computer. You may use GS+ on a
network or file server ONLY if access is limited to one user at a time and you have the original copy of the
documentation and program media.
GS+ requires activation over the internet. You may transfer the license from one computer to another by
deactivating the license on the computer on which it is currently installed and reactivating the license on
another computer. You do not have the right to activate or otherwise use GS+ on more than one
computer, hard disk drive, or file server at a time.
2. GS+ is owned by Gamma Design Software and is protected by United States copyright laws and international
treaty provisions. GS+ must be treated like any other copyrighted material although you may either 1)
transfer GS+ to a single hard disk drive so long as you keep the original copy for the purpose of backup, or 2)
make one copy of GS+ for backup purposes. The written material accompanying GS+ may not be copied.
3. GS+ may not be rented or leased, but may be permanently transferred if you keep no copies of any version of
GS+ and the recipient agrees to the terms of this agreement.
4. You may not decompile, disassemble, or reverse-engineer GS+.
5. Gamma Design retains all rights not granted expressly herein. Nothing in this Agreement constitutes a
waiver of Gamma Design’s rights under any federal or state law.

Limited Warranty
1. Gamma Design Software warrants that GS+ will conform substantially to the accompanying written materials for
a period of 1 year from the date of purchase, provided that GS+ is used on computer hardware and with the
operating system for which it was designed.
2. Gamma Design Software disclaims all other warranties, either express or implied, including implied warranties
of merchantability and fitness for a particular purpose. This applies to both the software itself and
accompanying written materials. This limited warranty gives you specific legal rights; you may have others
that vary from state to state.
3. Under no circumstances shall Gamma Design Software be liable for any damages whatsoever arising out of
the use of or inability to use GS+, even if Gamma Design Software has been advised of the possibility of
such damages. Such damages include but are not limited to damages for loss of profits or revenue, loss of
use of the software, loss of data, the cost of recovering such software or data, the cost of substitute software,
or claims by third parties. In no case shall Gamma Design Software be liable for more than the amount of
the license fee, as set forth below. Some states do not allow the exclusion or limitation of liability for
consequential or incidental damages, so this limitation may not apply to you.

User Remedies
1. Gamma Design Software’s entire liability and your exclusive remedy shall be, at Gamma Design Software’s
discretion, either (1) refund of the purchase price or (b) replacement of the software that does not meet
Gamma Design Software’s limited warranty. In either case software must be returned to Gamma Design
Software with a copy of the sales receipt. This warranty is void if failure has resulted from accident, abuse,
or misapplication. Any replacement will be warranted for one year.
2. The warranties and remedies set forth above are exclusive and in lieu of all others, oral or written, express or
implied. No Gamma Design Software distributor or employee is authorized to make any modification or
addition to this warranty.

U.S. Government Restricted Rights


+
GS software and documentation are provided with RESTRICTED AND LIMITED RIGHTS. Use, duplication, or
disclosure by the Government is subject to restrictions as noted in subparagraph (c)(1)(ii) of The Rights in Technical
Data and Computer Software clause at 52.227-7013. The manufacturer is Gamma Design Software, P.O. Box 201,
Plainwell, MI 49080.
General
+
You must register your copy of GS to be eligible for customer support and service. You may do so on line at
www.gammadesign.com or during the installation process. If you have questions about this agreement, write to
Gamma Design Software, P.O. Box 201, Plainwell, MI 49080, U.S.A.

You might also like