Professional Documents
Culture Documents
Republic Act 8293, section 176 states that: No copyright shall subsist in any
work of the Government of the Philippines. However, prior approval of the
government agency or office wherein the work is created shall be necessary for
exploitation of such work for profit. Such agency or office may, among other things,
impose as a condition the payment of royalties.
The TLE/TVL – ICT (Technical Drafting) Activity Sheet will help you
facilitate the leaching-learning activities specified in each Most Essential Learning
Competency (MELC) with minimal or no face-to-face encounter between you and
learner. This will be made available to the learners with the references/links to ease
the independent learning.
Name of Learner:
_______________________________________________________
Introduction
Object Selection
Object Selection lets you identify the subject yourself just by drawing a rough
selection around it.
1. Pick Single
2. Window
You can define a window selection by
clicking at two points. Click the first point on
the left side and 2nd point on the right side.
This will select all elements inside the
window.
If you want to activate window selection, type W then [enter]. Type it when AutoCAD
asks you: select objects…
Even you pick points from right then left, it will be window selection.
3. Cross Window
If your window selection defined from right to left, it will be cross window selection. It
will select all elements inside and touch the window.
4. Fence
5. Window Polygon
6. Crossing Polygon
7. Touching Objects
When AutoCAD asks you to select an object, type ‘FS then [enter]. We use ‘for
transparent use. Pick your object, then all objects touching it will be selected.
FASTSEL is an express tool. So, if you don’t have express tools installed, it might
not work.
This selection is controlled by FSMODE system variable.
FSMODE = OFF (default), it will select objects touching your picked object only.
FSMODE = ON, it will select objects touching it and all objects touching them too.
If you have many overlapped drawing elements or close to each other and
you are too lazy to zoom in, you can cycle between them by pressing [shift] +
[space]. Hold your [shift] key, and press [space] several times until you found
your object. Release your keyboard key, then click your mouse.
Did you ever want to select your previous selection? Easy, just type P then
[enter] when AutoCAD asks you to do selection!
10. Remove/Add
Sometimes it’s easier to select all elements then remove some of them from
your selection set. You can do this by holding [shift] and the select object you
want to exclude. OR, you can type R then [enter] to switch to remove mode. To
activate add objects, type A then [enter].
Tips: When you are picking objects in a complex drawing, use the ZOOM
command transparently to make object selection easier. All Zoom options
selected from the toolbars are automatically transparent but if you invoke the
command from the keyboard you will need to enter zoom.
Arriola, Cesar T. et. al (2013). Drafting Learning Module for Grade 10, OHSP
Modules. Department of Education.
IV. Activity Proper
Exercise No. 1
url: https://www.youtube.com/watch?v=hhL8d6K6tZA
Title: Object selection methods in autoCAD | Selecting objects in autoCAD
V. Reflection. Please use separate sheet of paper.
This section provides you as learners the opportunity to write the lessons
you have learned after accomplishing your exercise/activities. This serves as
a simple learning journal for you to have the opportunity to express your
thoughts and revisit your learning journey and realize the importance of
resourcefulness and creativity. Here are the following questions:
a. What insights have you gained from your activity this week?
b. What significant values have you developed while doing your
activities?
c. What difficulties did you encounter and how did you overcome them?
Exercise No. 1
1.Pick single
2.Window
3.Fence
4.Window Polygon
5.Crossing Polygon