Professional Documents
Culture Documents
CS112a
CS44b
CS58b
CS31a
CS44a
CS12
CS16
CS17
CS32
CS30
CS40
CS48
CS58
CS66
CS70
X X X X X
General Information : -
It has been observed that the warning signs are not fixed at uniform level in WEC.
Some of warning signs are missing and some of them are not fixed at designated
place. The warning signs are must in all WEC as per the ENERCON standards.
The warning signs are to be fixed as per details mentioned below.
2. Safety Harness: -
This sign indicates that the safety harness and belts
must to be used with a fall arrester in this area.
d) In the Vacuum Circuit Breaker Yard: - at the entrance of all VCB yard, where it
could be clearly visible at eye level. (As shown in picture 1.a, 3.a & 3.b)
Picture 9.a
The low free foot space of 150mm can’t meet at some tower
flanges. In this case, this sign must be fixed on the tower
flange and on the tower wall, approximately above 8 feet
from tower flange. Picture 9.b
(As shown in picture 9.a & 9.b)
Picture 11.a
12. Anchorage Points for the Rescue Device RGR4 (SAP 13339): -
(Note for E-30 WEC: - The PU tape can also use on this sign to protect it from the
sunlight and rainwater.)
16. Outside Supply High Permanents D. C. Voltage - Relay Box (SAP 26034): -